Fedora IoT F29 (?RC)

[Douglas E. Hopley Jr.]

The machine is a laptop.  Lenovo x100e

P = AMD Athlon Neo Processor MV-40
 M = 2GB
 S = 40GB
 N = Gigabit Ethernet , Wifi

i just pulled down Fedora-IoT-dvd-x86_64-29-20181128.2.iso

And attempted to do a fresh install on another X100e (same specs as the
device with the update issue).

On boot I choose Install...

There is an issue;  screen warnings as follows

... Warning: dracut - initqueue timeout - starting  timeout scripts

<repeats a number of times > ...

... Warning: Could not boot

Then exits to 'dracut' prompt

This is different than the 'rpm-ostree udate'  issue (see =
https://bugzilla.redhat.com/show_bug.cgi?id=1652994)  but similar and
similar/same h/w

Where to direct my attention  next OR options to get the install going?

Thanks for your time

[Peter Robinson]

On Sat, Dec 1, 2018 at 12:13 AM Douglas E. Hopley Jr.
 wrote:
> The machine is a laptop.  Lenovo x100e
>
> P = AMD Athlon Neo Processor MV-40
>  M = 2GB
>  S = 40GB
>  N = Gigabit Ethernet , Wifi
>
> i just pulled down Fedora-IoT-dvd-x86_64-29-20181128.2.iso
>
> And attempted to do a fresh install on another X100e (same specs as the device with the update issue).
>
> On boot I choose Install...
>
> There is an issue;  screen warnings as follows
>
> ... Warning: dracut - initqueue timeout - starting  timeout scripts
>
> <repeats a number of times > ...
>
> ... Warning: Could not boot
>
> Then exits to 'dracut' prompt
>
> This is different than the 'rpm-ostree udate'  issue (see = https://bugzilla.redhat.com/show_bug.cgi?id=1652994)  but similar and similar/same h/w
>
> Where to direct my attention  next OR options to get the install going?

That's already covered in the RC notes I sent out previously. It's
known, completely unrelated to the bug you commented on, and basically
our last blocker.

Peter