On Saturday 05 June 2010 17:15:10 Martin (KDE) wrote:
Am Samstag, 5. Juni 2010 schrieb Anne Wilson:
On Saturday 05 June 2010 08:15:26 Anne Wilson wrote:
CIFS mount - on the occasion when all 3 NFS mounts were listed I was able
to type in the user password. On the times when less that 3 were listed no input was recognised. Coincidence? I don't know.
That part clearly is coincidence, since I've just seen all three listed and it still wouldn't accept keyboard input.
It seems I have a solution - but I don't quite understand it, so perhaps you could explain. I commented out the fstab cifs line, thinking I could add it again later when I've sorted things out. There was a long delay in booting, while the nfs mounts were said ot have failed. Then I saw 'Mounting other filesystems' succeed. When the desktop is fully loaded, dolphin tells me that all the nfs mounts AND the samba mount are working!
I had some similar problems (the long delay on boot). This was caused by the missing network service but using the networkManager stuff. But I user a ldap base user configuration and at some stage while the network is not up other processes tries to fetch user information from the ldap server.
I think something like that is happening, but the network service appears to be listed several items before the nfs mounts. However, messages has these lines
Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> found WiFi radio killswitch rfkill1 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/ieee80211/phy0/rfkill1) (driver <unknown>) Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> WiFi disabled by radio killswitch; disabled by state file Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> WWAN enabled by radio killswitch; enabled by state file Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> WiMAX enabled by radio killswitch; enabled by state file Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> Networking is enabled by state file Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (eth0): carrier is OFF Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (eth0): new Ethernet device (driver: 'e1000e' ifindex: 2) Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0 Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (eth0): now managed Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (eth0): device state change: 1 -> 2 (reason 2) Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (eth0): bringing up device. Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (eth0): preparing device. Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (eth0): deactivating device (reason: 2). Jun 5 07:25:11 tecra-a11 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlagn' ifindex: 3) Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1 Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (wlan0): now managed Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (wlan0): device state change: 1 -> 2 (reason 2) Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (wlan0): bringing up device. Jun 5 07:25:11 tecra-a11 NetworkManager[1277]: <info> (wlan0): deactivating device (reason: 2).
being lines 6959-6979 and
Jun 5 07:25:13 tecra-a11 kernel: Slow work thread pool: Starting up Jun 5 07:25:13 tecra-a11 kernel: Slow work thread pool: Ready Jun 5 07:25:13 tecra-a11 kernel: FS-Cache: Loaded Jun 5 07:25:13 tecra-a11 kernel: FS-Cache: Netfs 'nfs' registered for caching Jun 5 07:25:13 tecra-a11 kernel: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None Jun 5 07:25:13 tecra-a11 kernel: 0000:00:19.0: eth0: 10/100 speed: disabling TSO Jun 5 07:25:13 tecra-a11 NetworkManager[1277]: <info> (eth0): carrier now ON (device state 2) Jun 5 07:25:13 tecra-a11 NetworkManager[1277]: <info> (eth0): device state change: 2 -> 3 (reason 40) Jun 5 07:25:13 tecra-a11 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 5 07:25:13 tecra-a11 NetworkManager[1277]: <info> Activation (eth0) starting connection 'System eth0' Jun 5 07:25:13 tecra-a11 kernel: Slow work thread pool: Starting up Jun 5 07:25:13 tecra-a11 kernel: Slow work thread pool: Ready Jun 5 07:25:13 tecra-a11 kernel: FS-Cache: Loaded Jun 5 07:25:13 tecra-a11 kernel: FS-Cache: Netfs 'nfs' registered for caching Jun 5 07:25:13 tecra-a11 kernel: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None Jun 5 07:25:13 tecra-a11 kernel: 0000:00:19.0: eth0: 10/100 speed: disabling TSO Jun 5 07:25:13 tecra-a11 NetworkManager[1277]: <info> (eth0): carrier now ON (device state 2) Jun 5 07:25:13 tecra-a11 NetworkManager[1277]: <info> (eth0): device state change: 2 -> 3 (reason 40) Jun 5 07:25:13 tecra-a11 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 5 07:25:13 tecra-a11 NetworkManager[1277]: <info> Activation (eth0) starting connection 'System eth0'
being lines 7002-7026 then
Jun 5 07:25:14 tecra-a11 NetworkManager[1277]: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete. Jun 5 07:25:15 tecra-a11 avahi-daemon[1290]: Registering new address record for fe80::223:18ff:fe50:285a on eth0.*. Jun 5 07:26:13 tecra-a11 kernel: Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE Jun 5 07:26:13 tecra-a11 kernel: CIFS VFS: Send error in SessSetup = -13 Jun 5 07:26:13 tecra-a11 kernel: CIFS VFS: cifs_mount failed w/return code = -13 Jun 5 07:34:36 tecra-a11 init: rc main process (1142) killed by TERM signal
being lines 7056 - 7061.
As you see, things seem to be in the correct order.
Back to your problem: what does your fstab look like
the relevant part is
192.168.0.40:/home /mnt/borg2_home nfs4 rsize=8192,wsize=8192,timeo=14,intr 192.168.0.40:/Data1 /mnt/borg2_Data1 nfs4 rsize=8192,wsize=8192,timeo=14,intr 192.168.0.40:/Data2 /mnt/borg2_Data2 nfs4 rsize=8192,wsize=8192,timeo=14,intr 192.168.0.40:/Data3 /mnt/borg2_Data3 nfs4 rsize=8192,wsize=8192,timeo=14,intr # 192.168.0.40:/Data1 /mnt/smbData1 cifs user=anne,gid=users,forcegid,rw
and what does "chkconfig --list" gives you at the console? Does
chkconfig --list | grep network network 0:off 1:off 2:off 3:off 4:off 5:off 6:off
chkconfig network on
I haven't tried that, since the network is controlled by networkManager. The laptop does sometimes have to be used on other wifi networks.
change anything (if you use wired ethernet connections)? In which order are the services started (ls in /etc/init.d/rc5.d)?
Not sure this is what you want, but I think it is:
S23NetworkManager S24avahi-daemon S24nfslock S24rpcgssd S24rpcidmapd S25cups S25netfs
Anne