teaming daemon not starting after reboot

[Chris Card]

Hi,

We are seeing occasionally seeing issues with the teaming daemon not starting after a
reboot on centos 7 VMs. Here is an example from last night (from /var/log/messages.minor):


Oct  6 23:36:21 ****** ovs-ctl[623]: Starting ovsdb-server [  OK  ]
Oct  6 23:36:22 ****** ovs-vsctl: ovs|00001|vsctl|INFO|Called as ovs-vsctl --no-wait --
init -- set Open_vSwitch . db-version=7.6.2
Oct  6 23:36:22 ****** ovs-vsctl: ovs|00001|vsctl|INFO|Called as ovs-vsctl --no-wait set
Open_vSwitch . ovs-version=2.3.1
"external-ids:system-id=\"47ff9309-5609-47e0-819c-b9055b25edbb\""
"system-type=\"CentOS\""
"system-version=\"7.1.1503-Core\""
Oct  6 23:36:22 ****** ovs-ctl[623]: Configuring Open vSwitch system IDs [  OK  ]
Oct  6 23:36:22 ****** network[733]: Bringing up loopback interface:  [  OK  ]
Oct  6 23:36:22 ****** kernel: [    6.158533] gre: GRE over IPv4 demultiplexor driver
Oct  6 23:36:22 ****** systemd[1]: Starting system-teamd.slice.
Oct  6 23:36:22 ****** systemd[1]: Created slice system-teamd.slice.
Oct  6 23:36:22 ****** systemd[1]: Starting Team Daemon for device bond0...
Oct  6 23:36:22 ****** kernel: [    6.199635] openvswitch: Open vSwitch switching
datapath
Oct  6 23:36:22 ****** ovs-ctl[623]: Inserting openvswitch module [  OK  ]
Oct  6 23:36:22 ****** kernel: [    6.338577] device ovs-system entered promiscuous mode
Oct  6 23:36:22 ****** kernel: [    6.340086] openvswitch: netlink: Unknown key attribute
(type=62, max=21).
Oct  6 23:36:22 ****** kernel: [    6.385293] device br-ex entered promiscuous mode
Oct  6 23:36:22 ****** kernel: [    6.426511] device br-int entered promiscuous mode
Oct  6 23:36:22 ****** teamd[857]: Failed to get interface information list.
Oct  6 23:36:22 ****** teamd[857]: Failed to init interface information list.
Oct  6 23:36:22 ****** teamd[857]: Team init failed.
Oct  6 23:36:22 ****** teamd[857]: teamd_init() failed.
Oct  6 23:36:22 ****** teamd[857]: Failed: Invalid argument
Oct  6 23:36:22 ****** systemd[1]: teamd(a)bond0.service: main process exited, code=exited,
status=1/FAILURE
Oct  6 23:36:22 ****** network[733]: Bringing up interface bond0:  Job for
teamd(a)bond0.service failed. See 'systemctl status teamd(a)bond0.service' and
'journalctl -xn' for details.
Oct  6 23:36:22 ****** kernel: [    6.433515] device br-tun entered promiscuous mode
Oct  6 23:36:22 ****** systemd[1]: Unit teamd(a)bond0.service entered failed state.
Oct  6 23:36:22 ****** ovs-ctl[623]: Starting ovs-vswitchd [  OK  ]
Oct  6 23:36:22 ****** network[733]: [FAILED]
Oct  6 23:36:22 ****** ovs-ctl[623]: Enabling remote OVSDB managers [  OK  ]

Is this a known issue?

Chris

[Jiri Pirko]

Wed, Oct 07, 2015 at 10:15:35AM CEST, ctcard(a)hotmail.com wrote:
> Hi,
>
> We are seeing occasionally seeing issues with the teaming daemon not starting after a
> reboot on centos 7 VMs. Here is an example from last night (from /var/log/messages.minor):
>
>
> Oct  6 23:36:21 ****** ovs-ctl[623]: Starting ovsdb-server [  OK  ]
> Oct  6 23:36:22 ****** ovs-vsctl: ovs|00001|vsctl|INFO|Called as ovs-vsctl --no-wait --
> init -- set Open_vSwitch . db-version=7.6.2
> Oct  6 23:36:22 ****** ovs-vsctl: ovs|00001|vsctl|INFO|Called as ovs-vsctl --no-wait set
> Open_vSwitch . ovs-version=2.3.1
> "external-ids:system-id=\"47ff9309-5609-47e0-819c-b9055b25edbb\""
> "system-type=\"CentOS\""
> "system-version=\"7.1.1503-Core\""
> Oct  6 23:36:22 ****** ovs-ctl[623]: Configuring Open vSwitch system IDs [  OK  ]
> Oct  6 23:36:22 ****** network[733]: Bringing up loopback interface:  [  OK  ]
> Oct  6 23:36:22 ****** kernel: [    6.158533] gre: GRE over IPv4 demultiplexor driver
> Oct  6 23:36:22 ****** systemd[1]: Starting system-teamd.slice.
> Oct  6 23:36:22 ****** systemd[1]: Created slice system-teamd.slice.
> Oct  6 23:36:22 ****** systemd[1]: Starting Team Daemon for device bond0...
> Oct  6 23:36:22 ****** kernel: [    6.199635] openvswitch: Open vSwitch switching
> datapath
> Oct  6 23:36:22 ****** ovs-ctl[623]: Inserting openvswitch module [  OK  ]
> Oct  6 23:36:22 ****** kernel: [    6.338577] device ovs-system entered promiscuous mode
> Oct  6 23:36:22 ****** kernel: [    6.340086] openvswitch: netlink: Unknown key attribute
> (type=62, max=21).
> Oct  6 23:36:22 ****** kernel: [    6.385293] device br-ex entered promiscuous mode
> Oct  6 23:36:22 ****** kernel: [    6.426511] device br-int entered promiscuous mode
> Oct  6 23:36:22 ****** teamd[857]: Failed to get interface information list.
> Oct  6 23:36:22 ****** teamd[857]: Failed to init interface information list.
> Oct  6 23:36:22 ****** teamd[857]: Team init failed.
> Oct  6 23:36:22 ****** teamd[857]: teamd_init() failed.
> Oct  6 23:36:22 ****** teamd[857]: Failed: Invalid argument
> Oct  6 23:36:22 ****** systemd[1]: teamd(a)bond0.service: main process exited, code=exited,
> status=1/FAILURE
> Oct  6 23:36:22 ****** network[733]: Bringing up interface bond0:  Job for
> teamd(a)bond0.service failed. See 'systemctl status teamd(a)bond0.service' and
> 'journalctl -xn' for details.
> Oct  6 23:36:22 ****** kernel: [    6.433515] device br-tun entered promiscuous mode
> Oct  6 23:36:22 ****** systemd[1]: Unit teamd(a)bond0.service entered failed state.
> Oct  6 23:36:22 ****** ovs-ctl[623]: Starting ovs-vswitchd [  OK  ]
> Oct  6 23:36:22 ****** network[733]: [FAILED]
> Oct  6 23:36:22 ****** ovs-ctl[623]: Enabling remote OVSDB managers [  OK  ]
>
> Is this a known issue? 
Not to me.

Need more info, debug messages.

[Chris Card]

>  Wed, Oct 07, 2015 at 10:15:35AM CEST, ctcard(a)hotmail.com wrote:
>  >Hi,
>  >
>  >We are seeing occasionally seeing issues with the teaming daemon not starting after a
> reboot on centos 7 VMs. Here is an example from last night (from /var/log/messages.minor):
>
>  >
>  > <snip>
>  >Is this a known issue?
>  
>  Not to me.
>  
>  Need more info, debug messages. 
Thanks, I'll try and reproduce with teamd
running with debug output

Chris

[Chris Card]

>  > Wed, Oct 07, 2015 at 10:15:35AM CEST, ctcard(a)hotmail.com wrote:
>  > >Hi,
>  > >
>  > >We are seeing occasionally seeing issues with the teaming daemon not starting
> after a reboot on centos 7 VMs. Here is an example from last night (from
> /var/log/messages.minor): 
>  > >
>  > > <snip>
>  > >Is this a known issue?
>  > 
>  > Not to me.
>  > 
>  > Need more info, debug messages.
>  Thanks, I'll try and reproduce with teamd running with debug output 
I've
tried to reproduce with teamd running with -g, but so far it hasn't happened again.
My guess is that it is a timing issue/race condition, so making teamd run with debug out
may even slow it down enough to stop it happening.
Can you give me any idea what teamd might be racing against?

Chris
 		 	   		  

_______________________________________________
libteam mailing list
libteam(a)lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/libteam

[Jiri Pirko]

Thu, Oct 08, 2015 at 09:35:57AM CEST, ctcard(a)hotmail.com wrote:
> > > Wed, Oct 07, 2015 at 10:15:35AM CEST, ctcard(a)hotmail.com wrote:
> > > >Hi,
> > > >
> > > >We are seeing occasionally seeing issues with the teaming daemon not
> starting after a reboot on centos 7 VMs. Here is an example from last night (from
> /var/log/messages.minor): 
> > > >
> > > > <snip>
> > > >Is this a known issue?
> > > 
> > > Not to me.
> > > 
> > > Need more info, debug messages.
> > Thanks, I'll try and reproduce with teamd running with debug output
> I've tried to reproduce with teamd running with -g, but so far it hasn't happened
> again.
> My guess is that it is a timing issue/race condition, so making teamd run with debug out
> may even slow it down enough to stop it happening.
> Can you give me any idea what teamd might be racing against? 
No clue, this is quite odd. Try to compile teamd yourself and find out
where exactly the error happens.


> Chris
>  		 	   		  
>
> _______________________________________________
> libteam mailing list
> libteam(a)lists.fedorahosted.org
> https://lists.fedorahosted.org/mailman/listinfo/libteam

[Chris Card]

> >>> Wed, Oct 07, 2015 at 10:15:35AM CEST, ctcard(a)hotmail.com
> wrote:
> >>>>Hi,
> >>>>
> >>>>We are seeing occasionally seeing issues with the teaming daemon not
> starting after a reboot on centos 7 VMs. Here is an example from last night (from
> /var/log/messages.minor):
> >>>>
> >>>> <snip>
> >>>>Is this a known issue?
> >>>
> >>> Not to me.
> >>>
> >>> Need more info, debug messages.
> >> Thanks, I'll try and reproduce with teamd running with debug output
> >I've tried to reproduce with teamd running with -g, but so far it hasn't
> happened again.
> >My guess is that it is a timing issue/race condition, so making teamd run with debug
> out may even slow it down enough to stop it happening.
> >Can you give me any idea what teamd might be racing against?
>
>  No clue, this is quite odd. Try to compile teamd yourself and find out
>  where exactly the error happens. 
I just had this occur again, this time with teamd
running with debug output, but there was no useful extra information that I could see.
I did look at the source code for teamd, and the error occurs when this function fails:

int get_ifinfo_list(struct team_handle *th)
{
    struct nl_cb *cb;
    struct nl_cb *orig_cb;
    struct rtgenmsg rt_hdr = {
        .rtgen_family = AF_UNSPEC,
    };
    int ret;

    ret = nl_send_simple(th->nl_cli.sock, RTM_GETLINK, NLM_F_DUMP,
                 &rt_hdr, sizeof(rt_hdr));
    if (ret < 0)
        return -nl2syserr(ret);
    orig_cb = nl_socket_get_cb(th->nl_cli.sock);
    cb = nl_cb_clone(orig_cb);
    nl_cb_put(orig_cb);
    if (!cb)
        return -ENOMEM;

    nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, valid_handler, th);

    ret = nl_recvmsgs(th->nl_cli.sock, cb);
    nl_cb_put(cb);
    if (ret < 0)
        return -nl2syserr(ret);
    return check_call_change_handlers(th, TEAM_IFINFO_CHANGE);
}

but unfortunately I can't see that the error code is ever printed out anywhere, to
narrow down the point of failure.
I guess I'll have to follow your suggestion, and compile a version that prints out
more info on failure.

Chris

[Jiri Pirko]

Fri, Oct 09, 2015 at 04:02:48PM CEST, ctcard(a)hotmail.com wrote:
> >>>> Wed, Oct 07, 2015 at 10:15:35AM CEST, ctcard(a)hotmail.com wrote:
> >>>>>Hi,
> >>>>>
> >>>>>We are seeing occasionally seeing issues with the teaming daemon not
> starting after a reboot on centos 7 VMs. Here is an example from last night (from
> /var/log/messages.minor):
> >>>>>
> >>>>> <snip>
> >>>>>Is this a known issue?
> >>>>
> >>>> Not to me.
> >>>>
> >>>> Need more info, debug messages.
> >>> Thanks, I'll try and reproduce with teamd running with debug output
> >>I've tried to reproduce with teamd running with -g, but so far it hasn't
> happened again.
> >>My guess is that it is a timing issue/race condition, so making teamd run with
> debug out may even slow it down enough to stop it happening.
> >>Can you give me any idea what teamd might be racing against?
> >
> > No clue, this is quite odd. Try to compile teamd yourself and find out
> > where exactly the error happens.
> I just had this occur again, this time with teamd running with debug output, but there was
> no useful extra information that I could see.
> I did look at the source code for teamd, and the error occurs when this function fails:
>
> int get_ifinfo_list(struct team_handle *th)
> {
>     struct nl_cb *cb;
>     struct nl_cb *orig_cb;
>     struct rtgenmsg rt_hdr = {
>         .rtgen_family = AF_UNSPEC,
>     };
>     int ret;
>
>     ret = nl_send_simple(th->nl_cli.sock, RTM_GETLINK, NLM_F_DUMP,
>                  &rt_hdr, sizeof(rt_hdr));
>     if (ret < 0)
>         return -nl2syserr(ret);
>     orig_cb = nl_socket_get_cb(th->nl_cli.sock);
>     cb = nl_cb_clone(orig_cb);
>     nl_cb_put(orig_cb);
>     if (!cb)
>         return -ENOMEM;
>
>     nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, valid_handler, th);
>
>     ret = nl_recvmsgs(th->nl_cli.sock, cb);
>     nl_cb_put(cb);
>     if (ret < 0)
>         return -nl2syserr(ret);
>     return check_call_change_handlers(th, TEAM_IFINFO_CHANGE);
> }
>
> but unfortunately I can't see that the error code is ever printed out anywhere, to
> narrow down the point of failure.
> I guess I'll have to follow your suggestion, and compile a version that prints out
> more info on failure. 
Sure, that's why I asked :)

[Chris Card]

>  Fri, Oct 09, 2015 at 04:02:48PM CEST, ctcard(a)hotmail.com wrote:
> >
> >
> >>>>> Wed, Oct 07, 2015 at 10:15:35AM CEST, ctcard(a)hotmail.com wrote:
> >>>>>>Hi,
> >>>>>>
> >>>>>>We are seeing occasionally seeing issues with the teaming daemon
> not starting after a reboot on centos 7 VMs. Here is an example from last night (from
> /var/log/messages.minor):
> >>>>>>
> >>>>>> <snip>
> >>>>>>Is this a known issue?
> >>>>>
> >>>>> Not to me.
> >>>>>
> >>>>> Need more info, debug messages.
> >>>> Thanks, I'll try and reproduce with teamd running with debug output
> >>>I've tried to reproduce with teamd running with -g, but so far it
> hasn't happened again.
> >>>My guess is that it is a timing issue/race condition, so making teamd run with
> debug out may even slow it down enough to stop it happening.
> >>>Can you give me any idea what teamd might be racing against?
> >>
> >> No clue, this is quite odd. Try to compile teamd yourself and find out
> >> where exactly the error happens.
> >I just had this occur again, this time with teamd running with debug output, but there
> was no useful extra information that I could see.
> >I did look at the source code for teamd, and the error occurs when this function
> fails:
> >
> >int get_ifinfo_list(struct team_handle *th)
> >  <snip>
> >
> >but unfortunately I can't see that the error code is ever printed out anywhere, to
> narrow down the point of failure.
> >I guess I'll have to follow your suggestion, and compile a version that prints out
> more info on failure.
>
>  Sure, that's why I asked :) 
I finally had it fail again with my extra logging,
and the error I see is this:

get_ifinfo_list: nl_recvmsgs failed: ret = -33

This is my patched code:
int get_ifinfo_list(struct team_handle *th)
{
    struct nl_cb *cb;
    struct nl_cb *orig_cb;
    struct rtgenmsg rt_hdr = {
        .rtgen_family = AF_UNSPEC,
    };
    int ret;

    ret = nl_send_simple(th->nl_cli.sock, RTM_GETLINK, NLM_F_DUMP,
                 &rt_hdr, sizeof(rt_hdr));
    if (ret < 0)
    {
        err(th, "get_ifinfo_list: nl_send_simple failed: ret = %d", ret);
        return -nl2syserr(ret);
    }
    orig_cb = nl_socket_get_cb(th->nl_cli.sock);
    cb = nl_cb_clone(orig_cb);
    nl_cb_put(orig_cb);
    if (!cb)
    {
        err(th, "get_ifinfo_list: nl_cb_clone failed");
        return -ENOMEM;
    }

    nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, valid_handler, th);

    ret = nl_recvmsgs(th->nl_cli.sock, cb);
    nl_cb_put(cb);
    if (ret < 0)
    {
        err(th, "get_ifinfo_list: nl_recvmsgs failed: ret = %d", ret);
        return -nl2syserr(ret);
    }
    ret = check_call_change_handlers(th, TEAM_IFINFO_CHANGE);
    if (ret < 0)
    {
        err(th, "get_ifinfo_list: check_call_change_handers failed: ret = %d",
ret);
    }
    return ret;
}

and 33 appears to be the error code NLE_DUMP_INTR
from /usr/include/libnl3/netlink/errno.h
Does that make any clearer what might be happening?

Chris

[Jiri Pirko]

Mon, Oct 19, 2015 at 09:27:25AM CEST, ctcard(a)hotmail.com wrote:
> > Fri, Oct 09, 2015 at 04:02:48PM CEST, ctcard(a)hotmail.com wrote:
> >>
> >>
> >>>>>> Wed, Oct 07, 2015 at 10:15:35AM CEST, ctcard(a)hotmail.com wrote:
> >>>>>>>Hi,
> >>>>>>>
> >>>>>>>We are seeing occasionally seeing issues with the teaming
> daemon not starting after a reboot on centos 7 VMs. Here is an example from last night
> (from /var/log/messages.minor):
> >>>>>>>
> >>>>>>> <snip>
> >>>>>>>Is this a known issue?
> >>>>>>
> >>>>>> Not to me.
> >>>>>>
> >>>>>> Need more info, debug messages.
> >>>>> Thanks, I'll try and reproduce with teamd running with debug
> output
> >>>>I've tried to reproduce with teamd running with -g, but so far it
> hasn't happened again.
> >>>>My guess is that it is a timing issue/race condition, so making teamd run
> with debug out may even slow it down enough to stop it happening.
> >>>>Can you give me any idea what teamd might be racing against?
> >>>
> >>> No clue, this is quite odd. Try to compile teamd yourself and find out
> >>> where exactly the error happens.
> >>I just had this occur again, this time with teamd running with debug output, but
> there was no useful extra information that I could see.
> >>I did look at the source code for teamd, and the error occurs when this function
> fails:
> >>
> >>int get_ifinfo_list(struct team_handle *th)
> >>  <snip>
> >>
> >>but unfortunately I can't see that the error code is ever printed out
> anywhere, to narrow down the point of failure.
> >>I guess I'll have to follow your suggestion, and compile a version that prints
> out more info on failure.
> >
> > Sure, that's why I asked :)
> I finally had it fail again with my extra logging, and the error I see is this:
>
> get_ifinfo_list: nl_recvmsgs failed: ret = -33
>
> This is my patched code:
> int get_ifinfo_list(struct team_handle *th)
> {
>     struct nl_cb *cb;
>     struct nl_cb *orig_cb;
>     struct rtgenmsg rt_hdr = {
>         .rtgen_family = AF_UNSPEC,
>     };
>     int ret;
>
>     ret = nl_send_simple(th->nl_cli.sock, RTM_GETLINK, NLM_F_DUMP,
>                  &rt_hdr, sizeof(rt_hdr));
>     if (ret < 0)
>     {
>         err(th, "get_ifinfo_list: nl_send_simple failed: ret = %d", ret);
>         return -nl2syserr(ret);
>     }
>     orig_cb = nl_socket_get_cb(th->nl_cli.sock);
>     cb = nl_cb_clone(orig_cb);
>     nl_cb_put(orig_cb);
>     if (!cb)
>     {
>         err(th, "get_ifinfo_list: nl_cb_clone failed");
>         return -ENOMEM;
>     }
>
>     nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, valid_handler, th);
>
>     ret = nl_recvmsgs(th->nl_cli.sock, cb);
>     nl_cb_put(cb);
>     if (ret < 0)
>     {
>         err(th, "get_ifinfo_list: nl_recvmsgs failed: ret = %d", ret);
>         return -nl2syserr(ret);
>     }
>     ret = check_call_change_handlers(th, TEAM_IFINFO_CHANGE);
>     if (ret < 0)
>     {
>         err(th, "get_ifinfo_list: check_call_change_handers failed: ret = %d",
> ret);
>     }
>     return ret;
> }
>
> and 33 appears to be the error code NLE_DUMP_INTR
> from /usr/include/libnl3/netlink/errno.h
> Does that make any clearer what might be happening? 
That looks like is might be bug inside libnl. What version do you use?

> Chris

[Chris Card]

> >>>>>>>>Hi,
> >>>>>>>>
> >>>>>>>>We are seeing occasionally seeing issues with the teaming
> daemon not starting after a reboot on centos 7 VMs. Here is an example from last night
> (from /var/log/messages.minor):
> >>>>>>>>
> >>>>>>>> <snip>
> >>>>>>>>Is this a known issue?
> >>>>>>>
> >>>>>>> Not to me.
> >>>>>>>
> >>>>>>> Need more info, debug messages.
> >>>>>> Thanks, I'll try and reproduce with teamd running with debug
> output
> >>>>>I've tried to reproduce with teamd running with -g, but so far it
> hasn't happened again.
> >>>>>My guess is that it is a timing issue/race condition, so making teamd
> run with debug out may even slow it down enough to stop it happening.
> >>>>>Can you give me any idea what teamd might be racing against?
> >>>>
> >>>> No clue, this is quite odd. Try to compile teamd yourself and find out
> >>>> where exactly the error happens.
> >>>I just had this occur again, this time with teamd running with debug output,
> but there was no useful extra information that I could see.
> >>>I did look at the source code for teamd, and the error occurs when this
> function fails:
> >>>
> >>>int get_ifinfo_list(struct team_handle *th)
> >>> <snip>
> >>>
> >>>but unfortunately I can't see that the error code is ever printed out
> anywhere, to narrow down the point of failure.
> >>>I guess I'll have to follow your suggestion, and compile a version that
> prints out more info on failure.
> >>
> >> Sure, that's why I asked :)
> >I finally had it fail again with my extra logging, and the error I see is this:
> >
> >get_ifinfo_list: nl_recvmsgs failed: ret = -33
> >
> >This is my patched code:
> >int get_ifinfo_list(struct team_handle *th)
> >{
> > struct nl_cb *cb;
> > struct nl_cb *orig_cb;
> > struct rtgenmsg rt_hdr = {
> > .rtgen_family = AF_UNSPEC,
> > };
> > int ret;
> >
> > ret = nl_send_simple(th->nl_cli.sock, RTM_GETLINK, NLM_F_DUMP,
> > &rt_hdr, sizeof(rt_hdr));
> > if (ret < 0)
> > {
> > err(th, "get_ifinfo_list: nl_send_simple failed: ret = %d", ret);
> > return -nl2syserr(ret);
> > }
> > orig_cb = nl_socket_get_cb(th->nl_cli.sock);
> > cb = nl_cb_clone(orig_cb);
> > nl_cb_put(orig_cb);
> > if (!cb)
> > {
> > err(th, "get_ifinfo_list: nl_cb_clone failed");
> > return -ENOMEM;
> > }
> >
> > nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, valid_handler, th);
> >
> > ret = nl_recvmsgs(th->nl_cli.sock, cb);
> > nl_cb_put(cb);
> > if (ret < 0)
> > {
> > err(th, "get_ifinfo_list: nl_recvmsgs failed: ret = %d", ret);
> > return -nl2syserr(ret);
> > }
> > ret = check_call_change_handlers(th, TEAM_IFINFO_CHANGE);
> > if (ret < 0)
> > {
> > err(th, "get_ifinfo_list: check_call_change_handers failed: ret = %d",
> ret);
> > }
> > return ret;
> >}
> >
> >and 33 appears to be the error code NLE_DUMP_INTR from
> /usr/include/libnl3/netlink/errno.h
> >Does that make any clearer what might be happening?
>
>  That looks like is might be bug inside libnl. What version do you use?
>  
we are using libnl3-3.2.21-8.el7.x86_64
Looking at the source code of nl, I can see this in recvmsgs:

        if (hdr->nlmsg_flags & NLM_F_DUMP_INTR) {
            if (cb->cb_set[NL_CB_DUMP_INTR])
                NL_CB_CALL(cb, NL_CB_DUMP_INTR, msg);
            else {
                /*
                 * We have to continue reading to clear
                 * all messages until a NLMSG_DONE is
                 * received and report the inconsistency.
                 */
                interrupted = 1;
            }
        }
...
    if (interrupted)
        err = -NLE_DUMP_INTR;

    if (!err)
        err = nrecv;

    return err;
}
so should libteam be handling NLE_DUMP_INTR?

Chris

[Jiri Pirko]

Mon, Oct 19, 2015 at 09:44:12AM CEST, ctcard(a)hotmail.com wrote:
> >>>>>>>>>Hi,
> >>>>>>>>>
> >>>>>>>>>We are seeing occasionally seeing issues with the
> teaming daemon not starting after a reboot on centos 7 VMs. Here is an example from last
> night (from /var/log/messages.minor):
> >>>>>>>>>
> >>>>>>>>> <snip>
> >>>>>>>>>Is this a known issue?
> >>>>>>>>
> >>>>>>>> Not to me.
> >>>>>>>>
> >>>>>>>> Need more info, debug messages.
> >>>>>>> Thanks, I'll try and reproduce with teamd running with
> debug output
> >>>>>>I've tried to reproduce with teamd running with -g, but so far
> it hasn't happened again.
> >>>>>>My guess is that it is a timing issue/race condition, so making
> teamd run with debug out may even slow it down enough to stop it happening.
> >>>>>>Can you give me any idea what teamd might be racing against?
> >>>>>
> >>>>> No clue, this is quite odd. Try to compile teamd yourself and find
> out
> >>>>> where exactly the error happens.
> >>>>I just had this occur again, this time with teamd running with debug
> output, but there was no useful extra information that I could see.
> >>>>I did look at the source code for teamd, and the error occurs when this
> function fails:
> >>>>
> >>>>int get_ifinfo_list(struct team_handle *th)
> >>>> <snip>
> >>>>
> >>>>but unfortunately I can't see that the error code is ever printed out
> anywhere, to narrow down the point of failure.
> >>>>I guess I'll have to follow your suggestion, and compile a version
> that prints out more info on failure.
> >>>
> >>> Sure, that's why I asked :)
> >>I finally had it fail again with my extra logging, and the error I see is this:
> >>
> >>get_ifinfo_list: nl_recvmsgs failed: ret = -33
> >>
> >>This is my patched code:
> >>int get_ifinfo_list(struct team_handle *th)
> >>{
> >> struct nl_cb *cb;
> >> struct nl_cb *orig_cb;
> >> struct rtgenmsg rt_hdr = {
> >> .rtgen_family = AF_UNSPEC,
> >> };
> >> int ret;
> >>
> >> ret = nl_send_simple(th->nl_cli.sock, RTM_GETLINK, NLM_F_DUMP,
> >> &rt_hdr, sizeof(rt_hdr));
> >> if (ret < 0)
> >> {
> >> err(th, "get_ifinfo_list: nl_send_simple failed: ret = %d", ret);
> >> return -nl2syserr(ret);
> >> }
> >> orig_cb = nl_socket_get_cb(th->nl_cli.sock);
> >> cb = nl_cb_clone(orig_cb);
> >> nl_cb_put(orig_cb);
> >> if (!cb)
> >> {
> >> err(th, "get_ifinfo_list: nl_cb_clone failed");
> >> return -ENOMEM;
> >> }
> >>
> >> nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, valid_handler, th);
> >>
> >> ret = nl_recvmsgs(th->nl_cli.sock, cb);
> >> nl_cb_put(cb);
> >> if (ret < 0)
> >> {
> >> err(th, "get_ifinfo_list: nl_recvmsgs failed: ret = %d", ret);
> >> return -nl2syserr(ret);
> >> }
> >> ret = check_call_change_handlers(th, TEAM_IFINFO_CHANGE);
> >> if (ret < 0)
> >> {
> >> err(th, "get_ifinfo_list: check_call_change_handers failed: ret = %d",
> ret);
> >> }
> >> return ret;
> >>}
> >>
> >>and 33 appears to be the error code NLE_DUMP_INTR from
> /usr/include/libnl3/netlink/errno.h
> >>Does that make any clearer what might be happening?
> >
> > That looks like is might be bug inside libnl. What version do you use?
> >
>
> we are using libnl3-3.2.21-8.el7.x86_64
> Looking at the source code of nl, I can see this in recvmsgs:
>
>         if (hdr->nlmsg_flags & NLM_F_DUMP_INTR) {
>             if (cb->cb_set[NL_CB_DUMP_INTR])
>                 NL_CB_CALL(cb, NL_CB_DUMP_INTR, msg);
>             else {
>                 /*
>                  * We have to continue reading to clear
>                  * all messages until a NLMSG_DONE is
>                  * received and report the inconsistency.
>                  */
>                 interrupted = 1;
>             }
>         }
> ...
>     if (interrupted)
>         err = -NLE_DUMP_INTR;
>
>     if (!err)
>         err = nrecv;
>
>     return err;
> }
> so should libteam be handling NLE_DUMP_INTR? 
Yes, that looks like a way to go. Do you want to cook-up some patch to
fix this?

[Flavio Leitner]

On Wed, Oct 07, 2015 at 08:15:35AM +0000, Chris Card wrote:
>  Hi,
>  
>  We are seeing occasionally seeing issues with the teaming daemon not starting after a
> reboot on centos 7 VMs. Here is an example from last night (from /var/log/messages.minor):
>
>  
>  Oct  6 23:36:21 ****** ovs-ctl[623]: Starting ovsdb-server [  OK  ]
>  Oct  6 23:36:22 ****** ovs-vsctl: ovs|00001|vsctl|INFO|Called as ovs-vsctl --no-wait --
> init -- set Open_vSwitch . db-version=7.6.2
>  Oct  6 23:36:22 ****** ovs-vsctl: ovs|00001|vsctl|INFO|Called as ovs-vsctl --no-wait set
> Open_vSwitch . ovs-version=2.3.1
> "external-ids:system-id=\"47ff9309-5609-47e0-819c-b9055b25edbb\""
> "system-type=\"CentOS\""
> "system-version=\"7.1.1503-Core\""
>  Oct  6 23:36:22 ****** ovs-ctl[623]: Configuring Open vSwitch system IDs [  OK  ]
>  Oct  6 23:36:22 ****** network[733]: Bringing up loopback interface:  [  OK  ]
>  Oct  6 23:36:22 ****** kernel: [    6.158533] gre: GRE over IPv4 demultiplexor driver
>  Oct  6 23:36:22 ****** systemd[1]: Starting system-teamd.slice.
>  Oct  6 23:36:22 ****** systemd[1]: Created slice system-teamd.slice.
>  Oct  6 23:36:22 ****** systemd[1]: Starting Team Daemon for device bond0...
>  Oct  6 23:36:22 ****** kernel: [    6.199635] openvswitch: Open vSwitch switching
> datapath
>  Oct  6 23:36:22 ****** ovs-ctl[623]: Inserting openvswitch module [  OK  ]
>  Oct  6 23:36:22 ****** kernel: [    6.338577] device ovs-system entered promiscuous mode
>  Oct  6 23:36:22 ****** kernel: [    6.340086] openvswitch: netlink: Unknown key attribute
> (type=62, max=21).
>  Oct  6 23:36:22 ****** kernel: [    6.385293] device br-ex entered promiscuous mode
>  Oct  6 23:36:22 ****** kernel: [    6.426511] device br-int entered promiscuous mode
>  Oct  6 23:36:22 ****** teamd[857]: Failed to get interface information list.
>  Oct  6 23:36:22 ****** teamd[857]: Failed to init interface information list.
>  Oct  6 23:36:22 ****** teamd[857]: Team init failed.
>  Oct  6 23:36:22 ****** teamd[857]: teamd_init() failed.
>  Oct  6 23:36:22 ****** teamd[857]: Failed: Invalid argument
>  Oct  6 23:36:22 ****** systemd[1]: teamd(a)bond0.service: main process exited, code=exited,
> status=1/FAILURE
>  Oct  6 23:36:22 ****** network[733]: Bringing up interface bond0:  Job for
> teamd(a)bond0.service failed. See 'systemctl status teamd(a)bond0.service' and
> 'journalctl -xn' for details. 

systemd is telling you the command to get more info.
I suspect that the bond0 is using ports that might not be available
at the time teamd is initializing.

fbl


>  Oct  6 23:36:22 ****** kernel: [    6.433515] device br-tun entered
> promiscuous mode
>  Oct  6 23:36:22 ****** systemd[1]: Unit teamd(a)bond0.service entered failed state.
>  Oct  6 23:36:22 ****** ovs-ctl[623]: Starting ovs-vswitchd [  OK  ]
>  Oct  6 23:36:22 ****** network[733]: [FAILED]
>  Oct  6 23:36:22 ****** ovs-ctl[623]: Enabling remote OVSDB managers [  OK  ]
>  
>  Is this a known issue?
>  
>  Chris
>   		 	   		   
>  _______________________________________________
>  libteam mailing list
>  libteam(a)lists.fedorahosted.org
>  https://lists.fedorahosted.org/mailman/listinfo/libteam