Re: (Another approach) -- Difficulty trying to add letsencrypt certificate for ssl usage in wildfly

[John W. Himpel]

Since I seem to be getting nowhere on my initial approach, I am going to change tactics.

I am attempting to follow:
https://dev.to/orestispantazos/install-let-s-encrypt-certificate-on-jboss...

I can get almost all the steps to work properly.

I am confused on where to insert the shown xml into the .../configuration/standalone.xml
file.

Any help would be greatly appreciated.

I think if I can get this xml snippet into .../configuration/standalone.xml, then I will
have a running wildfly instance
utilizing ssl.  But everywhere I think to add the snippet results in wildfly startup
saying there's a syntax error in
the configuration.

Thanks.


On Thu, 2022-07-14 at 16:03 -0500, John W. Himpel wrote:
>  On Wed, 2022-07-13 at 15:38 -0500, John W. Himpel wrote:
>  > I am trying to follow Farah Juma's Blog entry found at
>  >
> https://developer.jboss.org/people/fjuma/blog/2018/08/31/obtaining-certif...
>  > to configure wildfly to obtain a "Let's Encrypt" certificate for use
> by wildfly (Version 26).
>  > 
>  > I have installed a new wildfly instance in /opt/wildfly/wf26.  It starts
> successfully using systemd.
>  > 
>  > I execute the jboss-cli command shown under the  heading "Prerequisite
> configuration" using the following command:
>  > 
>  > /opt/wildfly/wf26/bin/jboss-cli.sh --connect
>  >     batch --file=/home/jwhimpel/prerequisite.cli
>  >     run-batch
>  > 
>  > jboss-cli.sh responds with "The batch executed successfully".
>  > 
>  > In /opt/wildfly/wf26/standalone/log/server.log, I see:
>  > 2022-07-13 20:06:30,849 WARN  [org.wildfly.extension.elytron] (MSC service thread
> 1-2) WFLYELY00023: KeyStore file
>  > '/opt/wildfly/wf26/standalone/configuration/server.keystore.jks' does not
> exist. Used blank.
>  > 
>  > I'm assuming this is a harmless warning.
>  > 
>  > I execute the jboss-cli command shown under the heading "One-time
> configuration" using the following command:
>  > 
>  > /opt/wildfly/wf26/bin/jboss-cli.sh --connect
>  >   batch --file=/home/jwhimpel/configure_account.cli
>  >   run-batch
>  > 
>  > jboss-cli.sh responds with "The batch executed successfully"
>  > 
>  > In /opt/wildfly/wf26/standalone/log/server.log, I see:
>  > 2022-07-13 20:07:12,878 WARN  [org.wildfly.extension.elytron] (MSC service thread
> 1-3) WFLYELY00023: KeyStore file
>  > '/opt/wildfly/wf26/standalone/configuration/accounts.keystore.jks' does not
> exist. Used blank.
>  > 
>  > Again, I'm assuming this is a harmless warning.  However, an
> accounts.keystore.jks file now appears under
>  > /opt/wildfly/wf26/standalone/configuration/.
>  > 
>  > 
>  > I execute the jboss-cli command shown under the heading "Obtain a certificate
> from Let's Encrypt using the following
>  > command:
>  > 
>  > /opt/wildfly/wf26/bin/jblss-cli.sh --connect
>  >   batch --file=/home/jwhimpel/obtain_certificate.cli
>  >   run-batch
>  > 
>  > jboss-cli.sh responds with: The batch failed with the following error (you are
> remaining in the b
>  > atch editing mode to have a chance to correct the error): 
>  > WFLYCTL0062: Composite operation failed and was rolled back. Steps that failed:
>  > Step: step-1
>  > Operation: /subsystem=elytron/key-store=serverKS:obtain-certificate(alias=server
>  > ,domain-names=[testWildfly.jlhimpel.net],certificate-authority-account=myLetsEnc
>  > ryptAccount,agree-to-terms-of-service)
>  > Failure: ELY10048: Challenge response failed validation by the ACME server
>  > 
>  > 
>  > 
>  > In /opt/wildfly/wf26/standalone/log/server.log, I see:
>  > 2022-07-13 20:25:48,624 ERROR [org.jboss.as.controller.management-operation]
> (management-handler-thread - 2)
>  > WFLYCTL0013: Operation ("obtain-certificate") failed - address: ([
>  >     ("subsystem" => "elytron"),
>  >     ("key-store" => "serverKS")
>  > ]) - failure description: "ELY10048: Challenge response failed validation by
> the ACME server"
>  > 
>  > File prerequisite.cli:
>  > /subsystem=elytron/key-store=serverKS:add(path=server.keystore.jks,
> relative-to=jboss.server.config.dir, credential-
>  > reference={clear-text=secret}, type=JKS)
>  > 
>  > File configure_account.cli:
>  > /subsystem=elytron/key-store=accountsKS:add(path=accounts.keystore.jks,relative-
>  > to=jboss.server.config.dir,credential-
>  > reference={clear-text=secret},type=JKS)
>  >
> /subsystem=elytron/certificate-authority-account=myLetsEncryptAccount:add(alias=letsEncrypt,key-
>  > store=accountsKS,contact-urls=[mailto:[e-mail]])
>  > 
>  > File obtain_certificate.cli:
>  > /subsystem=elytron/key-store=serverKS:obtain-certificate(alias=server,domain-
>  >
> names=[testWildfly.jlhimpel.net],certificate-authority-account=myLetsEncryptAccount,agree-to-terms-of-service)
>  > 
>  > firewall-cmd --list-all shows:
>  > Server (active)
>  >   target: default
>  >   icmp-block-inversion: no
>  >   interfaces: enp1s0 localhost
>  >   sources: 
>  >   services: cockpit http https mountd nfs rpc-bind ssh
>  >   ports: 9990/tcp 9993/tcp 8080/tcp 8443/tcp 19990/tcp 19993/tcp
>  >   protocols: 
>  >   forward: no
>  >   masquerade: no
>  >   forward-ports: 
>  >   source-ports: 
>  >   icmp-blocks: 
>  >   rich rules: 
>  > 
>  > At this point, I am stumped as to what I might have done wrong.  Any suggestions
> would be greatly appreciated.
>  > 
>  > John
>  
>  I discovered that my router was pointing inbound port 80 and 443 to another server.  I
> corrected the router settings
>  and
>  reran the failing command.
>  
>  I got the following on the console:
>  The batch failed with the following error (you are remaining in the batch editing mode to
> have a chance to correct the
>  error): 
>  WFLYCTL0062: Composite operation failed and was rolled back. Steps that failed:
>  Step: step-1
>  Operation: /subsystem=elytron/key-store=serverKS:obtain-certificate(alias=server
>  ,domain-names=[testWildfly.jlhimpel.net],certificate-authority-account=myLetsEnc
>  ryptAccount,agree-to-terms-of-service)
>  Failure: ELY10048: Challenge response failed validation by the ACME server
>  
>  I got the following in the server.log:
>  2022-07-14 20:55:12,431 ERROR [org.jboss.as.controller.management-operation]
> (management-handler-thread - 6)
>  WFLYCTL0013: Operation ("obtain-certificate") failed - address: ([
>      ("subsystem" => "elytron"),
>      ("key-store" => "serverKS")
>  ]) - failure description: "ELY10048: Challenge response failed validation by the
> ACME server"
>  
>  I see nothing in the journal log.  I see nothing in the audit log.
>  
>  I performed "certbot certificates" and there is no certificate listed for
> testwildfly.jlhimpel.net.
>  
>  If I look at https://crt.sh, I see two certificates for testwildfly.jlhimpel.net with
> expiration dates in June of
>  2022.
>  
>  I am at a loss for ideas or places to look.
>  
>  John
>  
>  _______________________________________________
>  server mailing list -- server(a)lists.fedoraproject.org
>  To unsubscribe send an email to server-leave(a)lists.fedoraproject.org
>  Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/
>  List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>  List Archives:
> https://lists.fedoraproject.org/archives/list/[e-mail]
>  Do not reply to spam on the list, report it: https://pagure.io/fedora-infrastructure