test November 2003

test@lists.fedoraproject.org

341 participants
343 discussions

Mouse redetected
by DAVID BALAZIC 13 Nov '03

13 Nov '03

Around the third boot of a fresh FCT3 installation, kudzu "discovered" that I have "added" a PS/2 mouse. I accepted the offer to configure it. It was detected and working fine since the first install though. It also worked OK after this redetection. I did not change anything to trigger this. The only thing was playing with th XFree86 driver options ( gfx card options , not the input/mouse options ). Regards, David

4 3

Realplayer segfault on Fedora Core 1
by Ryan Nix 13 Nov '03

13 Nov '03

Does Realplayer 8 work for anyone else one FC1? I keep getting a seg fault after setup.

3 3

Xserver --nolisten tcp by default?
by Neal D. Becker 13 Nov '03

13 Nov '03

It seems that fedora1 changed the Xserver to start with --nolisten tcp by default. That's an important change! I didn't notice this in the release notes! How to I overide it?

2 1

Re: Fedora Core 1 Update: vnc-4.0-0.beta4.3.1
by alton bailey 13 Nov '03

13 Nov '03

EDIT THE /ect/sysconfig/rhn/source file scrol down to the directive yum updates-testing and uncomment it then run up2date >From: Harry Putnam <reader(a)newsguy.com> >Reply-To: fedora-test-list(a)redhat.com >To: fedora-test-list(a)redhat.com >Subject: Re: Fedora Core 1 Update: vnc-4.0-0.beta4.3.1 >Date: Thu, 13 Nov 2003 13:46:02 -0600 > >Tim Waugh <twaugh(a)redhat.com> writes: > > > This update can be downloaded from: > > >http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/1/ > > > >grep ^yum /etc/sysconfig/rhn/sources >yum updates-testing >http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/1 > ># up2date --list > >Fetching package list for channel: updates-testing... > >Fetching >http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/1/h…... >There was a fatal error communicating with the server. The message was: > >An HTTP error occurred: >URL: >http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/1/h… >Status Code: 404 >Error Message: Not Found > > >Whats wrong in above picture? > > >-- >fedora-test-list mailing list >fedora-test-list(a)redhat.com >http://www.redhat.com/mailman/listinfo/fedora-test-list _________________________________________________________________ Great deals on high-speed Internet access as low as $26.95. https://broadband.msn.com (Prices may vary by service area.)

1 0

Why is ide-scsi not provided in Arjan's 2.6 kernel?
by Willem Riede 13 Nov '03

13 Nov '03

Unlike previous versions (last I tried that had it was kernel-2.6.0-0.test8.1.66.i686.rpm) kernel-smp-2.6.0-0.test9.1.76.i686.rpm does not have the ied-scsi module. It's config has: configs/kernel-2.6.0-test9-i686.config:# CONFIG_BLK_DEV_IDESCSI is not set This is really annoying, and actually leaves all owners of IDE OnStream tape drives (where osst needs ide-scsi) in the cold! They will have to recompile every time :-( Can this decision _please_ be revoked? Thanks, Willem Riede. (maintainer of the osst driver)

6 14

Fedora Core 1 Update: redhat-config-printer-0.6.79.1-1
by Tim Waugh 13 Nov '03

13 Nov '03

--------------------------------------------------------------------- Fedora Update Notification FEDORA-2003-011 2003-11-13 --------------------------------------------------------------------- Name : redhat-config-printer Version : 0.6.79.1 Release : 1 Summary : A printer configuration backend/frontend combination. Description : The printconf utility is a printer configuration and filtration system based on magicfilter (the alchemist data library) and the foomatic filter system. It rebuilds local print configuration and spool directories from data sources at lpd init time, and is integrated to use the multi-sourced features of the alchemist data library. --------------------------------------------------------------------- Update Information: Packages fixing a bug concerning printer sharing in the Printing configuration tool are now available. --------------------------------------------------------------------- * Thu Nov 13 2003 Tim Waugh <twaugh(a)redhat.com> 0.6.79.1-1 - 0.6.79.1: - More sharing fixes (bug #109942). --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/1/ SRPMS/redhat-config-printer-0.6.79.1-1.src.rpm md5 sum: 242f8d89015789eff7257bf0e511f16a i386/redhat-config-printer-0.6.79.1-1.i386.rpm md5 sum: 19752c61438892b6a4dd9588f57ff074 i386/redhat-config-printer-gui-0.6.79.1-1.i386.rpm md5 sum: 34aae6bd02f9e687857ec0738bb78dac i386/debug/redhat-config-printer-debuginfo-0.6.79.1-1.i386.rpm md5 sum: 4aa593d37e559fad9e4c1e54a0d6686a This update can also be installed with the Update Agent; you can launch the Update Agent with the 'up2date' command. ---------------------------------------------------------------------

3 2

work around for kernel panic after install of FC1 on a NEW Sata Seagate drive
by RaXeT 13 Nov '03

13 Nov '03

I now successfully in part have a dual boot with WinXP Pro and FC1. However with the good comes always some bad. Since this was a NEW drive, I followed esban's work around for getting to first, install FC1 but am having trouble With the reboot, of course I can boot WinXP Pro, but after booting FC1, I get Kernel panic on the root filesystem. Esban's work around is for a upgraded drive, but not a new install. Is there away to manipulate grub such that I can some how do a insmod ft3xx.o (promise 376 driver) And mount the /dev/sda1 to some where? Like have grub root=/my/sata drive? Please help, RaXeT

1 0

ETA for Rudi ?
by Lars G 13 Nov '03

13 Nov '03

I have spotted some packages of kde 3.2 beta "Rudi" in the developer channel. (namely kdelibs) is there an eta when the rest of the packages will be released? ...looking foward to my next push ;) lars

2 1

wanted k3b, kopete
by Neal D. Becker 13 Nov '03

13 Nov '03

I hope fedora will soon have k3b again - it was available for the beta. I'd like to see kopete - I've built it myself on RH9 and on fedora betas, but it looks like there has never been a yum package for it.

3 4

Fedora Core 1 Update: gcc-3.3.2-2
by Bill Nottingham 13 Nov '03

13 Nov '03

(We're still ironing out the kinks here. Comments on the notification format welcome.) --------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2003-001 2003-11-12 --------------------------------------------------------------------- Name : gcc Version : 3.3.2 Release : 2 Summary : Various compilers (C, C++, Objective-C, Java, ...) Description : The gcc package contains the GNU Compiler Collection version 3.3.2. You'll need this package in order to compile C code. --------------------------------------------------------------------- * Mon Nov 10 2003 Jakub Jelinek <jakub(a)redhat.com> 3.3.2-2 - update from gcc-3_3-branch - PRs bootstrap/12666, target/11598, libgcj/10610, target/12654, target/12690, target/12712 - fix ICE with C++ initializers (Jason Merrill, #109283, PR c++/12726) - fix handling of functions with > 2GB stack frames - fix handling of objects larger than 2GB or 4GB (Jan Hubicka and others) - fix Fortran COMMONs bigger than 2GB (#106542) --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/1/ SRPMS/gcc-3.3.2-2.src.rpm md5 sum: b593ba37ce5d077c169a838b3e1cbdfa i386/gcc-3.3.2-2.i386.rpm md5 sum: 33636583f120fcbfd901b017dd18d369 i386/libgcc-3.3.2-2.i386.rpm md5 sum: 95aa53466e05c9ef3fda71199e0a0b80 i386/gcc-c++-3.3.2-2.i386.rpm md5 sum: 0c753a32dd65e843d94c58edc246e5ea i386/libstdc++-3.3.2-2.i386.rpm md5 sum: a82149f572a22151e1553518d2fb49cd i386/libstdc++-devel-3.3.2-2.i386.rpm md5 sum: db10a8688cc3fc33a93133c64512e187 i386/gcc-objc-3.3.2-2.i386.rpm md5 sum: 52df24c357a51bcc063b43f90bb87b87 i386/libobjc-3.3.2-2.i386.rpm md5 sum: 0f943328648a5e367dae3d77646c1cc5 i386/gcc-g77-3.3.2-2.i386.rpm md5 sum: 4340aac38c465ca81f89d3a8d0b1b726 i386/libf2c-3.3.2-2.i386.rpm md5 sum: 07053e96951b4212f33c239c82938797 i386/gcc-java-3.3.2-2.i386.rpm md5 sum: bdb48981d437bc894221b44978b6c5bb i386/libgcj-3.3.2-2.i386.rpm md5 sum: f86543078eb54144ad1176405996a863 i386/libgcj-devel-3.3.2-2.i386.rpm md5 sum: e65da48fbf3d638620bb49017f3e9d21 i386/cpp-3.3.2-2.i386.rpm md5 sum: 7c17c580b3691a828aea7ec6da051914 i386/gcc-gnat-3.3.2-2.i386.rpm md5 sum: 8119dbc66e54b54af63dd24fa0154413 i386/libgnat-3.3.2-2.i386.rpm md5 sum: 7b8e78c70c28e8f59077284062afc08a i386/debug/gcc-debuginfo-3.3.2-2.i386.rpm md5 sum: 4e152bd997b0600189f73aa18ed997ae This update can also be installed with the Update Agent; you can launch the Update Agent with the 'up2date' command. ---------------------------------------------------------------------

8 14

← Newer
1
...
7
8
9
10
11
12
13
...
35
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test November 2003