test October 2004

test@lists.fedoraproject.org

421 participants
682 discussions

help: rpmbuild of galeon for x86_64 bombs out complaining about libpopt
by Thomas J. Baker 29 Oct '04

29 Oct '04

I'm trying to build galeon for x86_64 and it bombs out complaining about libpopt: ... mkdir .libs g++ -fno-rtti -O2 -g -pipe -m64 -fshort-wchar -Wall -Wsign-compare -Wno- ctor-dtor-privacy -Wno-non-virtual-dtor -Wno-deprecated -o galeon galeon-nautilus-view.o statusbar.o galeon-main.o galeon-automation.o galeon-language-editor.o galeon-prefs-dialog.o galeon-shell.o galeon- tab.o galeon-window.o galeon-window-bookmark-activated-proxy.o galeon- favicon-cache.o galeon-favicon.o galeon-embed-favicon.o window- commands.o popup-commands.o history-dialog.o galeon-spinner.o ppview- toolbar.o session.o page-info-dialog.o pdm-dialog.o galeon-bookmarks- icon-provider.o window-recent-history.o galeon-embed-autoscroller.o galeon-embed-manual-scroller.o galeon-css-menu.o galeon-window-menu.o galeon-encoding-menu.o galeon-encoding-dialog.o galeon-recent-history- menu.o galeon-tab-menu.o galeon-popup.o galeon-action.o galeon-action- navigation.o galeon-action-location.o galeon-action-home.o galeon- action-new.o galeon-action-refresh.o galeon-action-stop.o galeon-action- go.o galeon-action-zoom.o galeon-action-spinner.o galeon-action- favicon.o galeon-favicon-action.o migrate.o gcc2abi.o GaleonAutomation- common.o GaleonAutomation-stubs.o GaleonAutomation-skels.o -Wl,--export- dynamic ../embed/.libs/libembed.a ../mozilla/.libs/libmozillaembed.a - L/usr/lib64/mozilla-1.7.3 -L/usr/lib -lgtkembedmoz -lxpcom -lplds4 - lplc4 - lnspr4 ../bookmarks/.libs/libbookmarks.a ../utils/.libs/libutils.a ../libegg/.libs/libegg.a ../libegg/dock/.libs/libegg-dock.a -pthread -L/usr/X11R6/lib64 -lnautilus -leel-2 -lgnomeui-2 -lSM -lICE /usr/lib64/libgailutil.so -lglade-2.0 -lbonoboui-2 /usr/lib64/libxml2.so -lpthread -lz -lgnomecanvas-2 -lgnome-2 /usr/lib/libpopt.so -lart_lgpl_2 -lpangoft2-1.0 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lbonobo-2 -lgconf-2 -lgnomevfs-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -Wl,--rpath -Wl,/usr/lib64 -Wl,--rpath -Wl,/usr/lib64 -Wl,--rpath -Wl,/usr/lib64/mozilla-1.7.3 /usr/bin/ld: skipping incompatible /usr/lib/libplds4.so when searching for -lplds4 /usr/bin/ld: skipping incompatible /usr/lib/libplc4.so when searching for -lplc4/usr/bin/ld: skipping incompatible /usr/lib/libnspr4.so when searching for -lnspr4 /usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread /usr/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread /usr/bin/ld: skipping incompatible /usr/lib/libz.so when searching for - lz /usr/bin/ld: skipping incompatible /usr/lib/libz.a when searching for - lz /usr/lib/libpopt.so: could not read symbols: File in wrong format collect2: ld returned 1 exit status make[3]: *** [galeon] Error 1 make[3]: Leaving directory `/net/home/rcc/tjb/rpm/BUILD/galeon-1.3.18/src' make[2]: *** [all] Error 2 make[2]: Leaving directory `/net/home/rcc/tjb/rpm/BUILD/galeon-1.3.18/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/net/home/rcc/tjb/rpm/BUILD/galeon-1.3.18' make: *** [all] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.48599 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.48599 (%build) sh-3.00$ I found one reference that said I should set LIBRARY_PATH to /usr/lib64 but that didn't help. Any ideas? Thanks, tjb -- ======================================================================= | Thomas Baker email: tjb(a)unh.edu | | Systems Programmer | | Research Computing Center voice: (603) 862-4490 | | University of New Hampshire fax: (603) 862-1761 | | 332 Morse Hall | | Durham, NH 03824 USA http://wintermute.sr.unh.edu/~tjb | =======================================================================

2 2

Latest rawhide hal/NetworkManager combo freezes machine or does not work at all
by Amitabha Roy 29 Oct '04

29 Oct '04

Latest rawhide update gives hal and NetworkManager version numbers: NetworkManager-0.3.1-1 NetworkManager-gnome-0.3.1-1 hal-0.4.0-9 First run: made sure NetworkManager started on startup. Opened up gnome console and started NetworkManagerInfo. Applet came up in notification area. Chose "Other Wireless Network" and typed in essid of wireless network (it is non-essid-broadcasting network). This *completely* froze the machine and had to do a hard reboot. Before freezing, console message was "Forcing device /org/freedesktop/NetworkManager/Devices/eth1" Second run: made sure NetworkManager was running. With utmost trepidation, opened up gnome console and typed in NetworkManagerInfo. Machine did not freeze this time, typed in ESSID of network as before. Voila! System-log shows connected. But also shows network connecting and disconnecting every second or so. Log attached below: Oct 27 16:06:15 localhost kernel: eth1: New link status: Disconnected (0002) Oct 27 16:06:15 localhost kernel: eth1: New link status: Connected (0001) Oct 27 16:06:22 localhost kernel: eth1: New link status: AP Changed (0003) Oct 27 16:06:25 localhost kernel: eth1: New link status: Disconnected (0002) Oct 27 16:06:25 localhost kernel: eth1: New link status: Connected (0001) Oct 27 16:06:28 localhost kernel: eth1: New link status: AP Changed (0003) As a result, network access is sporadic at best. output of /var/lib/pcmcia/stab is: Socket 0: Intersil PRISM2 11 Mbps Wireless Adapter 0 network orinoco_cs 0 eth1 Socket 1: empty Anyone else seen this ? Gone back to stopping NM and using ifup, iwconfig etc (and logging out of X once hostname is set due to xauth *sigh*). Amitabha

4 8

Bad norwegian translation in OO 1.1.2 as updated in FC2
by Kyrre Ness Sjobak 29 Oct '04

29 Oct '04

I just noticed that there where a somewhat bad translation bug in the norwegian translation of OpenOffice - as updated for FC2. When you right-click a picture, some of the texts are in german! If somebody could please check if this is the case on FC3 as well and get it fixed before release? It has a bugzilla: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=137487 which even includes some proposed translations. Sorry if i did not have time for checking them well enough, but i was racing against a rapidly running out laptop battery... Kyrre Ness Sjøbæk

2 2

Re: Should Fedora rpms be signed?
by Andrew 29 Oct '04

29 Oct '04

> On Fri, October 29, 2004 02:08 PM Jeff Spaleta wrote: > you can grab the signed metadata with the md5sums, check the sig on that. > and then do a md5sum check comparing the md5sum values in the metadata > and the package. You can do the md5sum check by hand. This isn't much > different than the situation with the isos. How do you verify you are > using the correct isos? you check the md5sums against an md5sum list. > How do you check the validity of the md5sum list? > You check the md5sum list signature. Amen!!!!!! Thank you for restating that again. I was hoping when you presented that before it would put all this to rest. Thats how digital signatures "work". I think that is really the BEST solution for this whole problem. > > You might argue it would be a good idea if there was a signed flat > md5sum list for all packages as well as the xml metadata, so the > md5sum command could use it. And then I'll tell you, you need to > accept the inevitable future of xml for all possible human > communication adopted by unanimous United Nations resolution, and you > should fix md5sum to parse xml structure files for md5sum sigs :-> Exactly! > Can rawhide packages be automatically signed... of course > Does autosigning help the intended, well informed, audience of the > rawhide packages... yes > Does autosigning hurt the unintended, un-informed or mis-informed > audience... i think it does. > > -jef > I and think the latter is a bigger and worse impact than the benefit of the former! Andrew

3 3

Sound still doesn't work in FC3rc3
by Kim Lux 29 Oct '04

29 Oct '04

In spite of all the assurances that the sound problems I was experiencing in FC3T3 were because I UPGRADED from FC2 instead of installing fresh, I still have no sound in FC3RC3. I installed FC3rc3 fresh, partitioning the drive several times. (I'll discuss that later.) Same symptoms too: arts going nuts, system-config-soundcard hangs, etc. See my post from yesterday on the same subject. I think this issue needs some attention. I submitted a bugzilla report on it.

1 0

RE: FC3t3 -- udev and SCSI devices
by Bill Cronk 29 Oct '04

29 Oct '04

Okay Harald I found what my problem was caused by and I fixed it. I rebuilt the new RAID box and during the create I specified /dev/md1, which of course didn't work since /dev/md1 does not exist! So I had to do a mknod to create md1 then run the 'mdadm --create...' which then did it's thing. Then I made sure that the mdadm.conf file was using the UUID numbers from the RAID boxes, my mount point existed and so on, then reboted which resulted in the box being mounted properly and udev created the proper /dev/md1 for the box being there. Problem though: How could one have gone into the superblocks and modify the /dev/md0 tag to change it to /dev/md1? I had to blow away the partitions and then do a total rebuild to do it, that is not a good way to manage the RAID boxes efficiently, but for me now both RAID boxes work. Regards Bill

1 0

FC4, laptop sleep and suspend, and SUSE 9.2
by D. D. Brierton 29 Oct '04

29 Oct '04

I know everyone is busy getting FC3 out of the door but I noticed on Seth Vidal's blog some thoughts about FC4 http://blog.sethdot.org/index.cgi/172 and in particular: "A concerted effort to make the acpi sleep and suspend functions work out-of-the-box on more laptops and desktops." I have to say that my total failure to get this to work on my Dell Inspiron 8200 is probably the only major grumble I currently have with running Linux (any Linux, not just FC) on my laptop. SUSE are touting major improvements in this area with their just released 9.2. Has anyone had a chance to test it out? If this isn't just marketing fluff or hype but actually works is there a chance of incorporating whatever it is they've done into FC4? Just curious ... Best, Darren -- ===================================================================== D. D. Brierton darren(a)dzr-web.com www.dzr-web.com Trying is the first step towards failure (Homer Simpson) =====================================================================

1 0

VMWare and FC3-rc3 upgrade
by Mark Haney 29 Oct '04

29 Oct '04

Should I bugzilla this? I have tried about a dozen times to Upgrade FC2 to FC3T3 on up to rc3 using the GUI. X crashes every single time. I finally decided to try a text based upgrade and so far everything seems to be hunky dory, it's downloading packages as we speak, which is farther than it gets when running the GUI. I made a screenshot of the failure which I can include if it helps, but don't want to waste a good bugzilla if the consensus is not to file one. -------------------------------------- Mark Haney Network Administrator InterAct Public Safety Systems mhaney(a)interactsys.com Fedora Core release 2 (Tettnang) Kernel: 2.6.8-1.521 GNU/Linux 12:08:08 up 4:54, 2 users, load average: 2.59, 2.43, 2.42

1 0

kfind needs to be added to bugzilla's component list
by Kim Lux 29 Oct '04

29 Oct '04

Subject says it all. BTW: I'm running fc3rc3. What version do I put this down as in bugzilla ?

1 0

Automatic mounting of USB drives...
by John Burton 29 Oct '04

29 Oct '04

Greetings! First off, FC3-RC1 (yum updated 10/28/04) looks pretty good so far. A couple of minor glitches, but nothing too bad. On problem I'm having & don't know quite how to proceed... I have a 1.5GB USB drive (looks like an old cigarette lighter). It has 2 partitions, both formatted as VFAT - have to communicate with Windows systems. The partitions were created under WindowsXP and have the labels "Common" & Backup" I plug it in to a USB port and it's recognized: > Oct 28 14:04:35 traveler kernel: usb 1-5: new high speed USB device using address 3 > Oct 28 14:04:36 traveler kernel: SCSI subsystem initialized > Oct 28 14:04:36 traveler kernel: Initializing USB Mass Storage driver... > Oct 28 14:04:36 traveler kernel: scsi0 : SCSI emulation for USB Mass Storage devices > Oct 28 14:04:36 traveler kernel: Vendor: TOSHIBA Model: MK6021GAS Rev: GA02 > Oct 28 14:04:37 traveler kernel: Type: Direct-Access ANSI SCSI revision: 02 > Oct 28 14:04:37 traveler kernel: usbcore: registered new driver usb-storage > Oct 28 14:04:37 traveler kernel: USB Mass Storage support registered. > Oct 28 14:04:37 traveler scsi.agent[3950]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/host0/0:0:0:0 > Oct 28 14:04:37 traveler kernel: SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) > Oct 28 14:04:37 traveler kernel: sda: assuming drive cache: write through > Oct 28 14:04:37 traveler udev[3998]: creating device node '/dev/sda' > Oct 28 14:04:37 traveler 05-pam_console.dev[3999]: Restoring console permissions for /dev/sda > Oct 28 14:04:37 traveler kernel: sda: sda1 sda2 > Oct 28 14:04:38 traveler kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > Oct 28 14:04:38 traveler udev[4014]: creating device node '/dev/sda1' > Oct 28 14:04:38 traveler udev[4021]: creating device node '/dev/sda2' Then it creates two mount points > Oct 28 14:04:38 traveler fstab-sync[4039]: added mount point /media/COMMON for /dev/sda1 > Oct 28 14:04:38 traveler fstab-sync[4043]: added mount point /media/BACKUP for /dev/sda2 > But it does not mount them. I can manually mount them by doing a "mount /dev/sda1 /media/COMMON". Now, the question. What do I have to do to have the USB drive/partitions mounted automatically? Thoughts? Suggestions? John

5 8

← Newer
1
...
5
6
7
8
9
10
11
...
69
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test October 2004