test May 2004

test@lists.fedoraproject.org

540 participants
783 discussions

Re: Problems with rndc and named, bind-9.2.3-13
by Brian Bober 28 May '04

28 May '04

I figured it out. my /var/named/chroot/etc/rndc.key was empty and I needed to copy /etc/rndc.key to replace it (installed by the caching-nameserver package) Command: (/var/named/chroot/etc)> cp /etc/rndc.key . I hope that helps. If you have bind-chroot package installed, then the rndc.key named uses isn't in the /etc/rndc.key but is in /var/named/chroot/etc/rndc.key Thanks to anduin and DA-MAN on irc.redhat.com #fedora for assistance and many others. :-)

1 0

Re: Problems with rndc and named, bind-9.2.3-13
by Brian Bober 28 May '04

28 May '04

(/var/named/chroot/etc)> telnet localhost 953 Trying 127.0.0.1... telnet: connect to address 127.0.0.1: Connection refused I think this is the issue... But port 953 is open on my firewall, it doesn't make sense. "Charlie Don" wrote: Hello all, I am having the traditional rndc problem. I have googled it and spent some time messing with rndc.conf, rndc.key and named.conf. I have used the rndc-keygen etc etc. <snip> What shall I do? Thanks, C.

1 0

Rawhide, Virtual PC (Mac OSX) don't get along?
by G.Wolfe Woodbury 28 May '04

28 May '04

I'm trying to install rawhide on a Virtual PC under OSX 10.2.5(?) and am having significant problems with the networking. An FC1 VPC has no problems with using the network, but the boot.iso from rawhide won't use the emulated tulip card properly. It fails DHCP and NAMED and HTTP. Is anyone using this combination with rawhide, and how did you get it going? -- G.Wolfe Woodbury `- -' U The Line Eater is a boojum!

1 0

some issues with nautilus MIME associations and thumbnails
by Siddharth Toshniwal 27 May '04

27 May '04

Hi all, Have been facing a few issues with nautilus for the last couple of days. I've upgraded my system (which was originally RedHat 9) using up2date using the rawhide channel, so I guess I may have some packages which are not working well with each other. I don't know exactly which upgrade has resulted in these problems, so I'm posting for help if anyone has solved similar issues. The details are as follows: * Nautilus does not show thumbnails for some of the images within one directory while for others (which have the same extension) it does so properly. Opening the images with either eog or gimp does not report any errors. * I seem to have some problem with *all* my MIME associations (including the ones that are configured by default usually) Even if I associate them manually (.jpg to eog, .doc to star-office and so on), nautilus does not open the same when I double click in the file window. I have to open any documents using the terminal only :( The file association is shown correctly the next time I double click the file and click on 'Associate', but somehow the association does not work on its own. The packages that I have installed are: nautilus-media-0.8.0-2 nautilus-2.6.0-5 shared-mime-info-0.14-1 gnome-mime-data-2.4.1-4 gnome-vfs2-2.6.0-8 I read up the following article but it is not clear to me yet as to what I've done incorrectly: http://www.amitysolutions.com.au/documents/GnomeFiles-technote.pdf thanks, Siddharth.

2 4

PCMCIA
by sumonish1＠optusnet.com.au 27 May '04

27 May '04

Problem with PCMCIA. Only way to get it to work is to do modprobe Yenta_socket then Service pcmcia restart then service network restart thanks Sumonish

2 1

libswigpy
by Paul F. Johnson 27 May '04

27 May '04

Hi, Just attempted to do a yum update from the rawhide servers and it's come back with libswigpy being missing. What is supposed to provide it or is it more a case of it not having been placed on rawhide yet? TTFN Paul -- "Your lives are in the hands of men no smarter than you or I, many of them incompetent boobs. I know this because I worked alongside them, gone bowling with them, watched them pass me over for promotions time and again. And I say ... This stinks!" - Homer Simpson

1 0

gdb looks for debug versions of libraries
by Rob Shewan 27 May '04

27 May '04

I am attempting to use KDevelop under FC2T3. I have googled this to death, examined release notes and so on. I did find a Redhat note that warns about the lack of debug libraries but I guess I'm in denial regarding the requirement to get the source for each of the libraries and build debug versions. gdb on the run command attempts to locate libraries built with debug information (see attached). gdb executed from the command line produces the error output and the human (me) ignores it and the debug session continues. KDbg ignores the errors as well but, KDevelop does not. KDevelop stops the debug session in its tracks (at least this is what I can understand from the interface). Are libraries available in the FC2* distribution that contain debug information? Rob Shewan Advanced Acoustic Concepts stat64("", 0xfeef3c2c) = -1 ENOENT (No such file or directory) open("/usr/lib/libstdc++.so.5.0.5.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/.debug/libstdc++.so.5.0.5.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/debug//usr/lib/libstdc++.so.5.0.5.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/tls/libm-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/tls/.debug/libm-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/debug//lib/tls/libm-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/libgcc_s-3.3.3-20040413.so.1.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/.debug/libgcc_s-3.3.3-20040413.so.1.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/debug//lib/libgcc_s-3.3.3-20040413.so.1.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/tls/libc-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/tls/.debug/libc-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/debug//lib/tls/libc-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/ld-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/.debug/ld-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/debug//lib/ld-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("", 0xfeef3c2c) = -1 ENOENT (No such file or directory) stat64("", 0xfeef3c2c) = -1 ENOENT (No such file or directory)

1 0

FC2 - RH9 dual boot problem
by Jim Bevier 27 May '04

27 May '04

I have a system with FC2 on /dev/hda6 (/) and /dev/hda1 (/boot). I also have a RedHat 9 system installed on /dev/hda8 (/) and I dual boot the system. The disk also has Win2K and WinXP. The FC2 is a fresh install over a FC2 Test 3 system as I used this system for testing of the FC2 test releases. Somewhere along the line during the FC2 testing, the RedHat system can no longer be booted. I get the following messages: ... ... XT3-fs: mounted filesystem with ordered data mode. attempt to access beyond end of device 03:08: rw=0, want 1219858868, limit=36893241 attempt to access beyond end of device 03:08: rw=0, want 1219858868, limit=36893241 Kernel panic: No Init found. I think this started after I did a "fixfile" on a FC2T2 system and had the RedHat partition mounted and it was "fixed" too. I am really not sure when the partition became unbootable. The limit value in the message is the size of the partition as reported by fdisk. I also get alignment errors reported from sfdisk. The same errors that are reported with other users who have dual boot problems. I even tried the fix suggested for the dual boot problem, but it had no affect. I do not have a problem with either windows systems, it is just with RedHat 9. The system is a Tyan 2460 with two Athlon 1200 cpus and 120 GB disk. Any idea of now I can get this system bootable? I can read/write it just fine from FC2. It just won't boot. Jim

1 0

ITE8212 RAID Controller - unable to allocate IRQ
by Hannes Mayer 27 May '04

27 May '04

[cross-post! sorry, but the fedora-list has so many messages, it's almost impossible to follow any thread] Hi all! I just recompiled kernel 2.6.6-1.391 (Arjan) with the ITE8212 driver as module. Everything went as expected and the kernel installed fine. But when I modprobe: # modprobe -f iteraid FATAL: Error inserting iteraid (/lib/modules/2.6.6-1.391custom/kernel/drivers/scsi/iteraid.ko): No such device The kernel says this: # dmesg [...] Found Controller: IT8212 UDMA/ATA133 RAID Controller iteraid_init: unable to allocate IRQ for IT8212 UDMA/ATA133 RAID Controller [...] What can be done to set another IRQ ? How can I check if there are any IRQ conflicts ? (all devices seem to perform fine) Thanks a lot, Hannes.

1 0

Highlighting in Abiword doesnot work ......
by Poonchezhian P. 27 May '04

27 May '04

Hi, When I try to highlight any text in Abiword, it doesnt work. I'm using KDE. It works with GNOME environment. This issue was there in FC1 too. Is there any way to sort it out ??? -- Poonchezhian P.

1 0

← Newer
1
2
3
4
5
6
7
8
9
...
79
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test May 2004