test January 2005

test@lists.fedoraproject.org

158 participants
154 discussions

Re: Defaut browser
by Alexandre Strube 05 Jan '05

05 Jan '05

Em Ter, 2005-01-04 às 10:27 +0100, Philippe Alain escreveu: > Bonjour, > > I think that Firefox is not a good choice for a default browser (for example, > there are no translations or with some bugs). Why not a stable Gnome browser > as Epiphany ? Firefox is getting mature right now. The translations are coming. Anyway, mozilla has never had my language on redhat/fedora, so my customers does not seem to care.

2 2

New testing kernel. 2.6.10-1.727_FC3
by Dave Jones 05 Jan '05

05 Jan '05

A new year, (another) new testing kernel. This rebases the whole tree to the latest upstream release 2.6.10, with the 2.6.10-ac2 patch on top for good measure. With around 4000 changes between 2.6.9 and 2.6.10, this fixes a lot of problems, including the infamous 'ACPI wont turn off my computer' bug. No doubt it accidentally brings along new regressions, so please, jump on it for a while, and once the worst bits are shaken out, I'll push this out as an update. This is not the same as the 2.6.10 in rawhide, as that one is tracking the daily -bk snapshots heading toward 2.6.11, whilst FC3 will get a 2.6.10-ac update. Thanks, Dave

14 31

3c59x PCMCIA
by Russell Coker 05 Jan '05

05 Jan '05

I've got a 3c59x PCMCIA card that doesn't work with Fedora, the latest Fedora kernel I've tried is 2.6.9-1.1049_FC4. I've tested it on three laptops that work with other PCMCIA ethernet devices so PCMCIA is apparently working it's an issue that's specific to this card. The same card works fine in a Debian machine with a kernel.org kernel so it seems to be a Fedora bug not something in the kernel code. What should I do next to investigate it? -- http://www.coker.com.au/selinux/ My NSA Security Enhanced Linux packages http://www.coker.com.au/bonnie++/ Bonnie++ hard drive benchmark http://www.coker.com.au/postal/ Postal SMTP/POP benchmark http://www.coker.com.au/~russell/ My home page

3 4

smp 724_FC3 can't read superblock on ext3 filesystem
by Anne & Lynn Wheeler 04 Jan '05

04 Jan '05

i've been running smp 681_FC3 kernel w/o any apparent problems. I recently tried smp 724_FC3 and it aborted pretty early in the boot process claiming that it couldn't find superblock on ext3 filesystem

1 0

RE: FC 3 and Kernel Lock or Hang
by Browder, Tom 04 Jan '05

04 Jan '05

> -----Original Message----- > From: fedora-test-list-bounces(a)redhat.com > [mailto:fedora-test-list-bounces@redhat.com] On Behalf Of Alan Cox > Sent: Tuesday, January 04, 2005 10:51 AM > To: For testers of Fedora Core development releases > I've got the ASUS one. I would say that nowdays there isnt > any point getting dual athlon boards given their slow > performance relative to a modern system. But why are we now having problems not evident with the FC 1 kernels? Thanks. Tom Browder

2 1

Fedora Core 2 Test Update: system-config-kickstart-2.5.19-1.fc2
by Chris Lumens 04 Jan '05

04 Jan '05

--------------------------------------------------------------------- Fedora Test Update Notification FEDORA-2004-588 2005-01-04 --------------------------------------------------------------------- Product : Fedora Core 2 Name : system-config-kickstart Version : 2.5.19 Release : 1.fc2 Summary : A graphical interface for making kickstart files. Description : Kickstart Configurator is a graphical tool for creating kickstart files. --------------------------------------------------------------------- Update Information: This update fixes bug #143946, where system-config-kickstart cannot load kickstart configuration files. It also incorporates all the other fixes and improvements that have taken place since the FC2 version of this utility. Please test that your existing kickstart files can be loaded, edited, and saved by this new version. This update will be pushed to final updates on January 11, 2005 if no major problems are found. Problem reports to clumens(a)redhat.com. --------------------------------------------------------------------- * Tue Jan 04 2005 Chris Lumens <clumens(a)redhat.com> - 2.5.19-1.fc2 - Rebuilt 2.5.19 for Fedora Core 2 to fix #143946. * Mon Dec 20 2004 Chris Lumens <clumens(a)redhat.com> - 2.5.19-1 - Fixed a segfault in pygtk on the partitioning screen. - Fixed RAID editing screen so the config values don't change if you repeatedly edit a RAID volume. * Fri Dec 10 2004 Chris Lumens <clumens(a)redhat.com> - 2.5.18-1 - Get package group lists and their translations out of the comps.xml file instead of relying on a built-in (and out of date) list. - Added an "Install Everything" button (#134679). * Thu Dec 02 2004 Chris Lumens <clumens(a)redhat.com> - 2.5.17-1 - Remove obsolete dependency resolution radio buttons. * Tue Nov 23 2004 Chris Lumens <clumens(a)redhat.com> - 2.5.16-1 - Fix display in indic locale (#138310) and (#138601) - Monitor order (#127477) - Translation of RAID message (#127687) - Unencrypted root passwords (#134678) - Broken nfs line parsing (#134681) * Fri Oct 01 2004 Paul Nasrat <pnasrat(a)redhat.com> - 2.5.15-1 - Translations * Tue Sep 21 2004 Paul Nasrat <pnasrat(a)redhat.com> - 2.5.14-1 - ks.cfg parsing errors * Tue Sep 07 2004 Paul Nasrat <pnasrat(a)redhat.com> - 2.5.13-1 - i18n .desktop * Mon Sep 06 2004 Paul Nasrat <pnasrat(a)redhat.com> - 2.5.12-4 - PyGTK API fix * Tue Aug 10 2004 Paul Nasrat <pnasrat(a)redhat.com> - 2.5.12-3 - Fix for mouse autoprobe (#129504) * Mon Aug 02 2004 Paul Nasrat <pnasrat(a)redhat.com> 2.5.12-2 - fix Japanese man page encoding (bug #128767) * Wed Jun 23 2004 Brent Fox <bfox(a)redhat.com> - 2.5.12-1 - use base names for packages (bug #122755) * Thu Jun 17 2004 Brent Fox <bfox(a)redhat.com> - 2.5.11-3 - comps name changed for KDE (bug #124612) - format of rhpl mouse dict changed (bug #125361) * Tue May 25 2004 Brent Fox <bfox(a)redhat.com> 2.5.11-2 - handle missing mouse line (bug #124341) - use N_ instead of _ in packages.py (bug #124144) - remove code for dead firewall widgets (bug #124342) --------------------------------------------------------------------- This update can be downloaded from: http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/2/ 91d90cfbcdf0db6cb6f526906740c8f1 SRPMS/system-config-kickstart-2.5.19-1.fc2.src.rpm cd470a7301f12946959663ff27cba9c4 x86_64/system-config-kickstart-2.5.19-1.fc2.noarch.rpm cd470a7301f12946959663ff27cba9c4 i386/system-config-kickstart-2.5.19-1.fc2.noarch.rpm This update can also be installed with the Update Agent; you can launch the Update Agent with the 'up2date' command. You may need to edit your up2date channels configuration. Within /etc/sysconfig/rhn/sources enable the following line: yum updates-testing http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/2/$… ---------------------------------------------------------------------

1 0

re: a modest request
by gslink 04 Jan '05

04 Jan '05

The problem with bad sectors is not with sectors that show a write check but with those that don't show a write check but are bad. The write check on most hard drives is very simple and consists only of parity. If a certain number of bits are dropped then there will be no write check and install will work perfectly. You will never know about this until you try to run the program because there will be no read error. In addition there is the case where buffers are being allocated. No check of media integrity is made on these(swap partition). This has always been a problem with RH. Most shops have discs with small bad spots and many discs develop these over time. The c option was put into mkfs just to take care of these problems. At the present time we must take ANY disc that displays even a small bad spot and use mkfs on another system before we can install Linux. I suspect that a surprising number of the strange troubles that are being reported by only one user are due to this problem. When you invoke Disc Druid you need to be able to request a long format or else mkfs needs to be on the recovery disc. Currently discs are tested at the factory and bad sectors are locked out In some large discs there are quite a few bad spots. In normal operation perfectly good discs will have bad spots develop over time. This is not a serious problem with modern discs if it is handled by the software. The problem has always been that RH doesn't handle the problem. Incidently, Microsoft does.

13 24

USB2 trouble: EHCI HCD died
by Michael J Gruber 04 Jan '05

04 Jan '05

Sorry for cross-posting, but this refers to FC3 and FC4 alike: I have an external USB2 hard disk and a PCMCIA USB2 controller. With kernel 2.6.5 (Knoppix) both are recognized, EHCI picks up the device and runs it at "high speed" (USB2 speed); on two different laptops (Dell and Toshiba, both Intel 32 architecture). With FC3 and the standard kernel-2.6.9-1.667, the USB2 controller is recognized and EHCI picks up. When I plug in the USB2 hard disk, EHCI gives up on it (ehci_hcd 0000:03:00.2: fatal error, ehci_hcd 0000:03:00.2: HC died; cleaning up), OHCI picks up instead and drives the device at "full speed" (USB1 speed). Of course the drive works this way, but about 20 to 40 times slower than with kernel 2.6.5. This happens with kernel .681 as well, on the two different laptops mentioned above. I hoped 2.6.10 would cure this, but the same happens when I run FC3 with the FC4 kernel 2.6.10-1.1063_FC4; that's why I am cross-posting to the test-list. (The FC4 kernel works nicely on FC3 otherwise.) Has anyone experienced symptoms like these? Is anyone driving USB2 devices at high speed successfuly with FC3/4? Thanks for any hints! Michael Jan 3 22:18:54 kolibri kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0002) Jan 3 22:18:54 kolibri kernel: ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 10 (level, low) -> IRQ 10 Jan 3 22:18:54 kolibri kernel: ohci_hcd 0000:03:00.0: OHCI Host Controller Jan 3 22:18:54 kolibri kernel: ohci_hcd 0000:03:00.0: irq 10, pci mem 12dc8000 Jan 3 22:18:54 kolibri kernel: ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 Jan 3 22:18:54 kolibri kernel: hub 3-0:1.0: USB hub found Jan 3 22:18:54 kolibri kernel: hub 3-0:1.0: 3 ports detected Jan 3 22:18:54 kolibri kernel: PCI: Enabling device 0000:03:00.1 (0000 -> 0002) Jan 3 22:18:54 kolibri kernel: ACPI: PCI interrupt 0000:03:00.1[B] -> GSI 10 (level, low) -> IRQ 10 Jan 3 22:18:54 kolibri kernel: ohci_hcd 0000:03:00.1: OHCI Host Controller Jan 3 22:18:54 kolibri kernel: ohci_hcd 0000:03:00.1: irq 10, pci mem 12dca000 Jan 3 22:18:54 kolibri kernel: ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 4 Jan 3 22:18:56 kolibri kernel: hub 4-0:1.0: USB hub found Jan 3 22:18:56 kolibri kernel: hub 4-0:1.0: 2 ports detected Jan 3 22:18:56 kolibri kernel: PCI: Enabling device 0000:03:00.2 (0000 -> 0002) Jan 3 22:18:56 kolibri kernel: ACPI: PCI interrupt 0000:03:00.2[C] -> GSI 10 (level, low) -> IRQ 10 Jan 3 22:18:56 kolibri kernel: ehci_hcd 0000:03:00.2: EHCI Host Controller Jan 3 22:18:56 kolibri kernel: ehci_hcd 0000:03:00.2: irq 10, pci mem 12dcc000 Jan 3 22:18:56 kolibri kernel: ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 5 Jan 3 22:18:56 kolibri kernel: ehci_hcd 0000:03:00.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 Jan 3 22:18:56 kolibri kernel: hub 5-0:1.0: USB hub found Jan 3 22:18:56 kolibri kernel: hub 5-0:1.0: 5 ports detected Jan 3 22:19:09 kolibri kernel: ehci_hcd 0000:03:00.2: fatal error Jan 3 22:19:09 kolibri kernel: ehci_hcd 0000:03:00.2: HC died; cleaning up Jan 3 22:19:09 kolibri kernel: ohci_hcd 0000:03:00.0: wakeup Jan 3 22:19:11 kolibri kernel: usb 3-1: new full speed USB device using address 2 Jan 3 22:19:11 kolibri kernel: usb 3-1: not running at top speed; connect to a high speed hub Jan 3 22:19:11 kolibri kernel: scsi1 : SCSI emulation for USB Mass Storage devices Jan 3 22:19:11 kolibri kernel: Vendor: WDC WD25 Model: 00JB-00GVA0 Rev: 08.0 Jan 3 22:19:11 kolibri kernel: Type: Direct-Access ANSI SCSI revision: 02 Jan 3 22:19:11 kolibri kernel: SCSI device sda: 488397169 512-byte hdwr sectors (250059 MB) Jan 3 22:19:11 kolibri kernel: sda: assuming drive cache: write through Jan 3 22:19:11 kolibri kernel: sda:Current sda: sense key No Sense Jan 3 22:19:11 kolibri kernel: sda1 sda2 sda3 sda4 < sda5 > Jan 3 22:19:11 kolibri kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 PCI: Enabling device 0000:03:00.0 (0000 -> 0002) ohci_hcd 0000:03:00.0: NEC Corporation USB PCI: Setting latency timer of device 0000:03:00.0 to 64 ohci_hcd 0000:03:00.0: irq 10, pci mem d187e000 ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected PCI: Enabling device 0000:03:00.1 (0000 -> 0002) ohci_hcd 0000:03:00.1: NEC Corporation USB (#2) PCI: Setting latency timer of device 0000:03:00.1 to 64 ohci_hcd 0000:03:00.1: irq 10, pci mem d19ac000 ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PCI: Enabling device 0000:03:00.2 (0000 -> 0002) ehci_hcd 0000:03:00.2: NEC Corporation USB 2.0 ehci_hcd 0000:03:00.2: irq 10, pci mem d19d1000 ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 5 ehci_hcd 0000:03:00.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected usb 5-1: new high speed USB device using address 2 scsi1 : SCSI emulation for USB Mass Storage devices Vendor: WDC WD25 Model: 00JB-00GVA0 Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 488397169 512-byte hdwr sectors (250059 MB) sda: assuming drive cache: write through sda: sda1 sda2 sda3 sda4 < sda5 > Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 USB Mass Storage device found at 2 Jan 3 21:56:34 kolibri kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0002) Jan 3 21:56:34 kolibri kernel: ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 10 (level, low) -> IRQ 10 Jan 3 21:56:34 kolibri kernel: ohci_hcd 0000:03:00.0: OHCI Host Controller Jan 3 21:56:34 kolibri kernel: ohci_hcd 0000:03:00.0: irq 10, pci mem 0x10800000 Jan 3 21:56:34 kolibri kernel: ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 Jan 3 21:56:34 kolibri kernel: hub 3-0:1.0: USB hub found Jan 3 21:56:34 kolibri kernel: hub 3-0:1.0: 3 ports detected Jan 3 21:56:35 kolibri kernel: PCI: Enabling device 0000:03:00.1 (0000 -> 0002) Jan 3 21:56:35 kolibri kernel: ACPI: PCI interrupt 0000:03:00.1[B] -> GSI 10 (level, low) -> IRQ 10 Jan 3 21:56:35 kolibri kernel: ohci_hcd 0000:03:00.1: OHCI Host Controller Jan 3 21:56:35 kolibri kernel: ohci_hcd 0000:03:00.1: irq 10, pci mem 0x10801000 Jan 3 21:56:35 kolibri kernel: ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 4 Jan 3 21:56:35 kolibri kernel: hub 4-0:1.0: USB hub found Jan 3 21:56:35 kolibri kernel: hub 4-0:1.0: 2 ports detected Jan 3 21:56:36 kolibri kernel: PCI: Enabling device 0000:03:00.2 (0000 -> 0002) Jan 3 21:56:36 kolibri kernel: ACPI: PCI interrupt 0000:03:00.2[C] -> GSI 10 (level, low) -> IRQ 10 Jan 3 21:56:36 kolibri kernel: ehci_hcd 0000:03:00.2: EHCI Host Controller Jan 3 21:56:36 kolibri kernel: ehci_hcd 0000:03:00.2: irq 10, pci mem 0x10802000 Jan 3 21:56:36 kolibri kernel: ehci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 5 Jan 3 21:56:36 kolibri kernel: ehci_hcd 0000:03:00.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 Jan 3 21:56:36 kolibri kernel: hub 5-0:1.0: USB hub found Jan 3 21:56:36 kolibri kernel: hub 5-0:1.0: 5 ports detected Jan 3 21:56:53 kolibri kernel: ehci_hcd 0000:03:00.2: fatal error Jan 3 21:56:53 kolibri kernel: ehci_hcd 0000:03:00.2: HC died; cleaning up Jan 3 21:56:54 kolibri kernel: usb 3-1: new full speed USB device using ohci_hcd and address 2 Jan 3 21:56:54 kolibri kernel: usb 3-1: not running at top speed; connect to a high speed hub Jan 3 21:56:54 kolibri kernel: scsi2 : SCSI emulation for USB Mass Storage devices Jan 3 21:56:59 kolibri kernel: Vendor: WDC WD25 Model: 00JB-00GVA0 Rev: 08.0 Jan 3 21:56:59 kolibri kernel: Type: Direct-Access ANSI SCSI revision: 00 Jan 3 21:56:59 kolibri kernel: SCSI device sda: 488397169 512-byte hdwr sectors (250059 MB) Jan 3 21:56:59 kolibri kernel: sda: assuming drive cache: write through Jan 3 21:56:59 kolibri kernel: SCSI device sda: 488397169 512-byte hdwr sectors (250059 MB) Jan 3 21:56:59 kolibri kernel: sda: assuming drive cache: write through Jan 3 21:56:59 kolibri kernel: sda: sda1 sda2 sda3 sda4 < sda5 > Jan 3 21:56:59 kolibri kernel: Attached scsi disk sda at scsi2, channel 0, id 0, lun 0

1 0

Re: Defaut browser
by Chuck Anderson 04 Jan '05

04 Jan '05

On Tue, Jan 04, 2005 at 10:27:29AM +0100, Philippe Alain wrote: > Bonjour, > > I think that Firefox is not a good choice for a default browser (for example, > there are no translations or with some bugs). Why not a stable Gnome browser > as Epiphany ? One that supported session management would be good. What a pain that Firefox/Mozilla don't.

2 1

Trying to trace why rpm is not working
by Paul F. Johnson 04 Jan '05

04 Jan '05

Hi, rpm --vv gives me the following output when I try to install just about anything. I need to be able to track down what has gone a miss for so many packages to give me preun and postun errors (it's just about every package on my machine that I try to install using rpm or via yum) and need to get it sorted quite quickly. Is it likely that I have two versions of the some package installed which is causing the script error and if that's the case, how do I track them down? (I'll guess at rpm -qa | grep - but I'm not sure how to only list duplicates or even everything installed in alphabetical order) D: ============== kernel-2.6.10-1.1056_FC4.i686.rpm D: Expected size: 16773245 = lead(96)+sigs(180)+pad(4)+data (16772965) D: Actual size: 16773245 D: kernel-2.6.10-1.1056_FC4.i686.rpm: MD5 digest: OK (5c8481c8999b44702da2be0f30f588e4) D: added binary package [0] D: found 0 source and 1 binary packages D: opening db environment /var/lib/rpm/Packages joinenv D: opening db index /var/lib/rpm/Packages rdonly mode=0x0 D: locked db index /var/lib/rpm/Packages D: ========== +++ kernel-2.6.10-1.1056_FC4 i686/linux 0x0 D: opening db index /var/lib/rpm/Depends create mode=0x0 D: Requires: rpmlib(VersionedDependencies) <= 3.0.3-1 YES (rpmlib provides) D: opening db index /var/lib/rpm/Providename rdonly mode=0x0 D: read h# 852 Header SHA1 digest: OK (f5148bed26f7c4c4a5558898d4383610569069e1) D: Requires: fileutils YES (db provides) D: read h# 854 Header SHA1 digest: OK (2bf0bc913297f811aea435020e287ab33034f1d2) D: Requires: module-init-tools YES (db provides) D: read h# 492 Header SHA1 digest: OK (44eb4c9dcf49b732335da2d8800c0380e4ae4646) D: Requires: initscripts >= 5.83 YES (db provides) D: read h# 659 Header SHA1 digest: OK (47f73590bf09a7586210d18bbb3c18d9c5b80f5b) D: Requires: mkinitrd >= 4.1.15 YES (db provides) D: opening db index /var/lib/rpm/Basenames rdonly mode=0x0 D: read h# 68 Header SHA1 digest: OK (21bd0b96e584da659d47243215e54c2e243a2e73) D: Requires: /bin/sh YES (db files) D: Requires: /bin/sh YES (cached) D: Requires: /bin/sh YES (cached) D: Requires: rpmlib(PayloadFilesHavePrefix) <= 4.0-1 YES (rpmlib provides) D: Requires: rpmlib(CompressedFileNames) <= 3.0.4-1 YES (rpmlib provides) D: read h# 751 Header SHA1 digest: OK (1ae380b9bd9b2abb08853d4442a724e0d6f81327) D: Conflicts: ppp <= 2.3.15 NO D: read h# 131 Header SHA1 digest: OK (c2f3c39b4c7268b3a32f51cee2fd95c91ce22524) D: Conflicts: pcmcia-cs <= 3.1.20 NO D: read h# 983 Header SHA1 digest: OK (6a8c0f0c44773fe59e67d2646bffcebb94c85c2f) D: Conflicts: isdn4k-utils <= 3.0 NO D: read h# 1037 Header SHA1 digest: OK (26bce07e8f9848075583ef135909fbb048281c25) D: Conflicts: mount < 2.10r-5 NO D: opening db index /var/lib/rpm/Pubkeys rdonly mode=0x0 D: read h# 66 Header sanity check: OK D: ========== DSA pubkey id b44269d04f2a6fd2 D: read h# 1003 Header V3 DSA signature: OK, key ID 4f2a6fd2 D: Conflicts: nfs-utils < 1.0.3 NO D: read h# 796 Header V3 DSA signature: OK, key ID 4f2a6fd2 D: Conflicts: e2fsprogs < 1.29 NO D: Conflicts: util-linux < 2.10 NO D: Conflicts: jfsutils < 1.0.14 NO D: Conflicts: reiserfsprogs < 3.6.3 NO D: Conflicts: xfsprogs < 2.1.0 NO D: read h# 746 Header SHA1 digest: OK (8e7576b053285767a1423aab2ecd1b3e6cc14316) D: Conflicts: procps < 2.0.9 NO D: read h# 828 Header V3 DSA signature: OK, key ID 4f2a6fd2 D: Conflicts: oprofile < 0.5.3 NO D: Conflicts: cipe < 1.4.5 NO D: read h# 1020 Header SHA1 digest: OK (fd0a8f8275c3eea26325cf32777c2411ab722eeb) D: Conflicts: kudzu <= 0.92 NO D: Conflicts: initscripts < 7.23 NO D: read h# 684 Header SHA1 digest: OK (ab2a234956bac6ed5d7c2d1c5949702dffe48ae7) D: Conflicts: dev < 3.2-7 NO D: read h# 480 Header SHA1 digest: OK (0f5f0d98640ce57bac9f4bfc8b0124edcd19fbd8) D: Conflicts: iptables < 1.2.5-3 NO D: Conflicts: bcm5820 < 1.81 NO D: Conflicts: nvidia-rh72 <= 1.0 NO D: read h# 218 Header SHA1 digest: OK (42cd02a992ff839079b193da3e02c69298f6b8e2) D: Conflicts: SysVinit < 2.84-13 NO D: read h# 742 Header SHA1 digest: OK (9d248f1a3b7bd800bf97d6e55bfc5826fd06fbef) D: Conflicts: pam < 0.75-48 NO D: read h# 856 Header SHA1 digest: OK (f28fa22e3a15d0e451f71cdd3082a5532ef2b6f2) D: Conflicts: vixie-cron < 3.0.1-73 NO D: Conflicts: privoxy < 3.0.0-8 NO D: read h# 126 Header SHA1 digest: OK (ef7b03d639df6c3527947d919bf87fa7fe0cc996) D: Conflicts: spamassassin < 2.44-4.8.x NO D: read h# 1027 Header SHA1 digest: OK (0de24248a864a527a82079eb5f3d952004a376f4) D: Conflicts: cups < 1.1.17-13 NO D: opening db index /var/lib/rpm/Conflictname rdonly mode=0x0 D: read h# 261 Header SHA1 digest: OK (bbf461f9d961f099cef7553c9c2b2f03a490a42a) D: read h# 643 Header SHA1 digest: OK (2be0d6f6f63c222df07d98522da42c1abcee5d3f) D: read h# 660 Header SHA1 digest: OK (d97f50add501eb55584e039f22f77a9d69100fb8) D: read h# 674 Header SHA1 digest: OK (ee78e8ed97377b5ce4cc4c964b702d9425164cdd) D: Conflicts: kernel < 2.2.0 NO D: Conflicts: kernel < 0:2.6 NO D: Conflicts: kernel < 2.2.12-7 NO D: closed db index /var/lib/rpm/Pubkeys D: closed db index /var/lib/rpm/Depends D: closed db index /var/lib/rpm/Conflictname D: closed db index /var/lib/rpm/Providename D: closed db index /var/lib/rpm/Basenames D: closed db index /var/lib/rpm/Packages D: closed db environment /var/lib/rpm/Packages D: ========== recording tsort relations D: ========== tsorting packages (order, #predecessors, #succesors, tree, depth) D: 0 0 0 0 0 +kernel-2.6.10-1.1056_FC4 D: installing binary packages D: opening db environment /var/lib/rpm/Packages joinenv D: opening db index /var/lib/rpm/Packages create mode=0x42 D: mounted filesystems: D: i dev bsize bavail iavail mount point D: 0 0x0301 4096 6415763 3825198 / D: 1 0x0003 4096 0 -1 /proc D: 2 0x0000 4096 0 -1 /sys D: 3 0x0009 4096 0 -1 /dev/pts D: 4 0x0010 4096 96984 96983 /dev/shm D: 5 0x0305 4096 4217971 3623939 /usr D: 6 0x0341 4096 14095612 9634914 /home D: 7 0x0342 4096 4255400 4928919 /MP3 D: 8 0x2201 4096 6652654 10714788 /Programming D: 9 0x2202 4096 7906951 4293625 /web D: 10 0x2241 4096 7094245 14809266 /backup D: 11 0x0012 4096 0 -1 /proc/sys/fs/binfmt_misc D: 12 0x0013 4096 0 -1 /var/lib/nfs/rpc_pipefs D: sanity checking 1 elements D: opening db index /var/lib/rpm/Name create mode=0x42 D: read h# 643 Header SHA1 digest: OK (2be0d6f6f63c222df07d98522da42c1abcee5d3f) D: read h# 660 Header SHA1 digest: OK (d97f50add501eb55584e039f22f77a9d69100fb8) D: read h# 674 Header SHA1 digest: OK (ee78e8ed97377b5ce4cc4c964b702d9425164cdd) D: computing 8380 file fingerprints D: computing file dispositions D: opening db index /var/lib/rpm/Basenames create mode=0x42 D: ========== +++ kernel-2.6.10-1.1056_FC4 i686-linux 0x0 D: Expected size: 16773245 = lead(96)+sigs(180)+pad(4)+data (16772965) D: Actual size: 16773245 D: install: kernel-2.6.10-1.1056_FC4 has 8380 files, test = 0 D: install: %pre(kernel-2.6.10-1.1056_FC4.i686) asynchronous scriptlet start D: install: %pre(kernel-2.6.10-1.1056_FC4.i686) execv(/bin/sh) pid 5058 D: install: waitpid(5058) rc 5058 status ff00 secs 0.002 error: %pre(kernel-2.6.10-1.1056_FC4.i686) scriptlet failed, exit status 255 error: install: %pre scriptlet failed (2), skipping kernel-2.6.10-1.1056_FC4 D: closed db index /var/lib/rpm/Basenames D: closed db index /var/lib/rpm/Name D: closed db index /var/lib/rpm/Packages D: closed db environment /var/lib/rpm/Packages -- "He's not the Messiah, he's a very naughty boy!" - Life of Brian, Monty Python

2 2

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test January 2005