I installed FC4 Test 1 on a Dell 6300 (FC3 works fine), and on the
first boot.. and every boot there after.. . the system hangs when
initializing hardware.
Starting udev: OK
Initializing Hardware...
I can boot of the Rescue CD fine, chroot'ed to /mnt/sysimage and go the
following informaiton that might help someone help me...
There is no /var/log/boot and the /var/log/messages file is empty
any ideas ??
*****lshal:******
error: dbus_bus_get: org.freedesktop.DBus.Error.FileNotFound: Failed to connecty
to socket /var/run/dbus/system_bus_socket: No such file or directory
***************
*****lspci*******
00:02.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:02.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:02.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:02.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:04.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro (rev 5c)
00:06.0 PCI bridge: Intel Corporation 80960RP [i960 RP Microprocessor/Bridge] (rev 05)
00:06.1 I2O: Intel Corporation 80960RP [i960RP Microprocessor] (rev 05)
00:08.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 05)
00:0a.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
00:10.0 Host bridge: Intel Corporation 450NX - 82451NX Memory & I/O Controller (rev 03)
00:12.0 Host bridge: Intel Corporation 450NX - 82454NX/84460GX PCI Expander Bridge (rev 04)
00:13.0 Host bridge: Intel Corporation 450NX - 82454NX/84460GX PCI Expander Bridge (rev 04)
00:14.0 Host bridge: Intel Corporation 450NX - 82454NX/84460GX PCI Expander Bridge (rev 04)
02:04.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891
02:06.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891
02:08.0 SCSI storage controller: Adaptec AIC-7860 (rev 03)
03:03.0 RAID bus controller: Digital Equipment Corporation DECchip 21554 (rev 01)
****************
****/var/log/anaconda.syslog*****
<4>Linux version 2.6.11-1.1177_FC4 (bhcompile(a)tweety.build.redhat.com) (gcc version 4.0.0 20050302 (Red Hat 4.0.0-0.31)) #1 Tue Mar 8 17:32:04 EST 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
<4> BIOS-e820: 0000000000100000 - 00000000dfffe000 (usable)
<4> BIOS-e820: 00000000dfffe000 - 00000000e0000000 (reserved)
<4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
<4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<5>2687MB HIGHMEM available.
<5>896MB LOWMEM available.
<4>Using x86 segment limits to approximate NX protection
<7>On node 0 totalpages: 917502
<7> DMA zone: 4096 pages, LIFO batch:1
<7> Normal zone: 225280 pages, LIFO batch:16
<7> HighMem zone: 688126 pages, LIFO batch:16
<6>DMI 2.2 present.
<7>ACPI: RSDP (v000 DELL ) @ 0x000fdee0
<7>ACPI: RSDT (v001 DELL PE6300 0x00000007 MSFT 0x0100000a) @ 0x000fdef4
<7>ACPI: FADT (v001 DELL PE6300 0x00000007 MSFT 0x0100000a) @ 0x000fdf20
<7>ACPI: MADT (v001 DELL PE6300 0x00000007 MSFT 0x0100000a) @ 0x000fdf94
<7>ACPI: DSDT (v001 DELL PE6300 0x00000007 MSFT 0x0100000a) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x808
<4>Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
<4>Built 1 zonelists
<4>Kernel command line: initrd=initrd.img ramdisk_size=8192 BOOT_IMAGE=vmlinuz
<6>Initializing CPU#0
<4>CPU 0 irqstacks, hard=c044d000 soft=c044c000
<4>PID hash table entries: 4096 (order: 12, 65536 bytes)
<4>Detected 550.025 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour VGA+ 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 3630680k/3670008k available (2475k kernel code, 38444k reserved, 689k data, 184k init, 2752504k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<7>Calibrating delay loop... 1089.53 BogoMIPS (lpj=544768)
<6>Security Framework v1.0.0 initialized
<6>SELinux: Initializing.
<6>SELinux: Starting in permissive mode
<6>selinux_register_security: Registering secondary module capability
<6>Capability LSM initialized as secondary
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<7>CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 512K
<5>CPU serial number disabled.
<7>CPU: After all inits, caps: 0383f3f7 00000000 00000000 00000040 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: Intel Pentium III (Katmai) stepping 03
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>ACPI: setting ELCR to 0200 (from 4c20)
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 4143k freed
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xfcc4e, last bus=3
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20050211
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PX0A] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<4>PCI: Searching for i450NX host bridges on 0000:00:10.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PX0A._PRT]
<6>ACPI: PCI Root Bridge [PX0B] (00:02)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PX0B._PRT]
<6>ACPI: PCI Root Bridge [PX1A] (00:03)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PX1A._PRT]
<4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 12) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 12) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 12)
<4>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 12) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 *14)
<4>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 *14)
<4>ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 11 12 *14)
<4>ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 9 *10 11 12 14)
<4>ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 10 *11 12 14)
<4>ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 10 11 12 *14)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 12 devices
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>PCI: Using ACPI for IRQ routing
<6>** PCI interrupts are no longer routed automatically. If this
<6>** causes a device to stop working, it is probably because the
<6>** driver failed to call pci_enable_device(). As a temporary
<6>** workaround, the "pci=routeirq" argument restores the old
<6>** behavior. If this argument makes the device work again,
<6>** please email the output of "lspci" to bjorn.helgaas(a)hp.com
<6>** so I can fix the driver.
<6>pnp: 00:0a: ioport range 0x810-0x83f has been reserved
<6>pnp: 00:0a: ioport range 0x850-0x85f has been reserved
<6>pnp: 00:0a: ioport range 0x2c00-0x2c7f has been reserved
<6>apm: BIOS not found.
<6>audit: initializing netlink socket (disabled)
<3>audit(1111617891.491:0): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>SELinux: Registering netfilter hooks
<6>Initializing Cryptographic API
<4>ksign: Installing public key data
<4>Loading keyring
<4>- Added public key C555D629B5DF3630
<4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>Linux agpgart interface v0.100 (c) Dave Jones
<6>[drm] Initialized drm 1.0.0 20040925
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<4>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>PIIX4: IDE controller at PCI slot 0000:00:02.1
<4>PCI: Enabling device 0000:00:02.1 (0000 -> 0001)
<6>PIIX4: chipset revision 1
<6>PIIX4: not 100% native mode: will probe irqs later
<6>PIIX4: neither IDE port enabled (BIOS)
<6>PIIX4: IDE controller at PCI slot 0000:00:10.0
<6>PIIX4: device not capable of full native PCI mode
<6>PIIX4: device disabled (BIOS)
<6>PIIX4: IDE controller at PCI slot 0000:00:10.0
<6>PIIX4: device not capable of full native PCI mode
<6>PIIX4: device disabled (BIOS)
<7>Probing IDE interface ide0...
<7>Probing IDE interface ide1...
<7>Probing IDE interface ide2...
<7>Probing IDE interface ide3...
<7>Probing IDE interface ide4...
<7>Probing IDE interface ide5...
<4>ide-floppy driver 0.99.newide
<6>usbcore: registered new driver hiddev
<6>usbcore: registered new driver usbhid
<6>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
<6>mice: PS/2 mouse device common for all mice
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
<6>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 8192 buckets, 256Kbytes
<4>TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
<4>TCP bind hash table entries: 65536 (order: 8, 1835008 bytes)
<6>TCP: Hash tables configured (established 524288 bind 65536)
<6>Initializing IPsec netlink socket
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<4>ACPI wakeup devices:
<4>
<6>ACPI: (supports S0 S4 S5)
<6>Freeing unused kernel memory: 184k freed
<7>vga16fb: initializing
<6>vga16fb: mapped to 0xc00a0000
<4>Console: switching to colour frame buffer device 80x30
<6>fb0: VGA16 VGA frame buffer device
<6>loop: loaded (max 8 devices)
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a National Semiconductor PC87306
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<5>SCSI subsystem initialized
<6>USB Universal Host Controller Interface driver v2.2
<4>PCI: Enabling device 0000:00:02.2 (0000 -> 0001)
<4>ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 9
<4>PCI: setting IRQ 9 as level-triggered
<6>ACPI: PCI interrupt 0000:00:02.2[D] -> GSI 9 (level, low) -> IRQ 9
<6>uhci_hcd 0000:00:02.2: UHCI Host Controller
<6>uhci_hcd 0000:00:02.2: irq 9, io base 0x1020
<6>uhci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<3>hub 1-0:1.0: over-current change on port 1
<3>hub 1-0:1.0: over-current change on port 2
<6>8139too Fast Ethernet driver 0.9.27
<4>ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 10
<4>PCI: setting IRQ 10 as level-triggered
<6>ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10
<6>eth0: RealTek RTL8139 at 0xd400, 00:0d:88:21:c9:3c, IRQ 10
<7>eth0: Identified 8139 chip type 'RTL-8100B/8139D'
<6>e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
<6>e100: Copyright(c) 1999-2004 Intel Corporation
<4>ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 11
<4>PCI: setting IRQ 11 as level-triggered
<6>ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>e100: eth1: e100_probe: addr 0xfe400000, irq 11, MAC addr 00:50:8B:02:EC:F9
<6>I2O subsystem v$Rev$
<6>i2o: max drivers = 8
<6>i2o: Checking for PCI I2O controllers...
<4>ACPI: PCI Interrupt Link [LNK9] enabled at IRQ 14
<4>PCI: setting IRQ 14 as level-triggered
<6>ACPI: PCI interrupt 0000:00:06.1[A] -> GSI 14 (level, low) -> IRQ 14
<6>i2o: I2O controller found on bus 0 at 49.
<6>iop0: PCI I2O controller at FE000000 size=4194304
<6>mtrr: Intel 450NX MMC detected. Write-combining disabled.
<4>mtrr: your processor doesn't support write-combining
<4>iop0: could not enable write combining MTRR
<6>iop0: MTRR workaround for Intel i960 processor
<6>iop0: Installed at IRQ 14
<6>iop0: Activating I2O controller...
<6>iop0: This may take a few minutes if there are many devices
<4>iop0: Timeout Initializing
<3>iop0: could not activate controller
<4>I2O controller: probe of 0000:00:06.1 failed with error -110
<6>I2O Block Device OSM v$Rev$
<6>block-osm: registered device at major 80
<4>ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 14
<6>ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 14 (level, low) -> IRQ 14
<4>ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 14
<6>ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 14 (level, low) -> IRQ 14
<4>ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 14
<6>ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 14 (level, low) -> IRQ 14
<6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<4> <Adaptec aic7890/91 Ultra2 SCSI adapter>
<4> aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
<4>
<6>scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<4> <Adaptec aic7890/91 Ultra2 SCSI adapter>
<4> aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
<4>
<6>scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<4> <Adaptec aic7860 Ultra SCSI adapter>
<4> aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
<4>
<4>(scsi2:A:5): 20.000MB/s transfers (20.000MHz, offset 15)
<5> Vendor: NEC Model: CD-ROM DRIVE:466 Rev: 1.06
<5> Type: CD-ROM ANSI SCSI revision: 02
<4>sr0: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>Attached scsi CD-ROM sr0 at scsi2, channel 0, id 5, lun 0
<6>Red Hat/Adaptec aacraid driver (1.1.2-lk2 Mar 8 2005)
<4>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5
<4>PCI: setting IRQ 5 as level-triggered
<6>ACPI: PCI interrupt 0000:03:03.0[A] -> GSI 5 (level, low) -> IRQ 5
<6>AAC0: kernel 2.7.4 build 3607
<6>AAC0: monitor 2.7.4 build 3607
<6>AAC0: bios 2.7.0 build 3607
<6>AAC0: serial 89734afafaf001
<6>scsi3 : percraid
<5> Vendor: DELL Model: Boot Rev: V1.0
<5> Type: Direct-Access ANSI SCSI revision: 02
<5>SCSI device sda: 71089152 512-byte hdwr sectors (36398 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 03 00 00 00
<5>SCSI device sda: drive cache: write through
<5>SCSI device sda: 71089152 512-byte hdwr sectors (36398 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 03 00 00 00
<5>SCSI device sda: drive cache: write through
<6> sda: unknown partition table
<5>Attached scsi removable disk sda at scsi3, channel 0, id 0, lun 0
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<4>Unable to load NLS charset utf8
<4>Unable to load NLS charset utf8
<7>ISO 9660 Extensions: RRIP_1991A
<4>Unable to identify CD-ROM format.
<4>VFS: Can't find an ext2 filesystem on dev loop0.
<6>security: 3 users, 5 roles, 583 types, 60 bools
<6>security: 54 classes, 70968 rules
<6>SELinux: Completing initialization.
<6>SELinux: Setting up existing superblocks.
<6>SELinux: initialized (dev loop0, type cramfs), uses genfs_contexts
<6>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
<6>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
<6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<6>SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
<6>SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
<6>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<6>SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
<6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
<6>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<6>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<6>SELinux: initialized (dev proc, type proc), uses genfs_contexts
<6>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
<6>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<6>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<6>md: raid0 personality registered as nr 2
<6>md: raid1 personality registered as nr 3
<6>raid5: automatically using best checksumming function: pIII_sse
<4> pIII_sse : 1100.000 MB/sec
<4>raid5: using function: pIII_sse (1100.000 MB/sec)
<6>md: raid5 personality registered as nr 4
<4>raid6: int32x1 144 MB/s
<4>raid6: int32x2 128 MB/s
<4>raid6: int32x4 128 MB/s
<4>raid6: int32x8 125 MB/s
<4>raid6: mmxx1 367 MB/s
<4>raid6: mmxx2 421 MB/s
<4>raid6: sse1x1 296 MB/s
<4>raid6: sse1x2 398 MB/s
<4>raid6: using algorithm sse1x2 (398 MB/s)
<6>md: raid6 personality registered as nr 8
<6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
<6>SGI XFS Quota Management subsystem
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel(a)redhat.com
<6>parport: PnPBIOS parport detected.
<6>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
<3>audit(1111618012.781:0): avc: denied { associate } for pid=685 exe=/mnt/runtime/usr/bin/python name=rpm scontext=user_u:object_r:root_t tcontext=system_u:object_r:root_t tclass=filesystem
<3>audit(1111618012.783:0): avc: denied { associate } for pid=685 exe=/mnt/runtime/usr/bin/python name=platform scontext=user_u:object_r:etc_runtime_t tcontext=system_u:object_r:root_t tclass=filesystem
<6>mtrr: Intel 450NX MMC detected. Write-combining disabled.
<4>mtrr: your processor doesn't support write-combining
<6>mtrr: Intel 450NX MMC detected. Write-combining disabled.
<4>mtrr: your processor doesn't support write-combining
<4>program anaconda is using a deprecated SCSI ioctl, please convert it to SG_IO
<4>program anaconda is using a deprecated SCSI ioctl, please convert it to SG_IO
<4>program anaconda is using a deprecated SCSI ioctl, please convert it to SG_IO
<4>program anaconda is using a deprecated SCSI ioctl, please convert it to SG_IO
<4>program anaconda is using a deprecated SCSI ioctl, please convert it to SG_IO
<4>program anaconda is using a deprecated SCSI ioctl, please convert it to SG_IO
<4>program anaconda is using a deprecated SCSI ioctl, please convert it to SG_IO
<4>program anaconda is using a deprecated SCSI ioctl, please convert it to SG_IO
<4>program anaconda is using a deprecated SCSI ioctl, please convert it to SG_IO
<4>program anaconda is using a deprecated SCSI ioctl, please convert it to SG_IO
<4>program anaconda is using a deprecated SCSI ioctl, please convert it to SG_IO
<4>program anaconda is using a deprecated SCSI ioctl, please convert it to SG_IO
<6>Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
<7>spurious 8259A interrupt: IRQ7.
<4>program anaconda is using a deprecated SCSI ioctl, please convert it to SG_IO
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on dm-0, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>SELinux: initialized (dev dm-0, type ext3), uses xattr
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>SELinux: initialized (dev sda1, type ext3), uses xattr
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda2, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>SELinux: initialized (dev sda2, type ext3), uses xattr
<3>uhci_hcd 0000:00:02.2: host controller process error, something bad happened!
<3>uhci_hcd 0000:00:02.2: host controller halted, very bad!
<3>audit(1111637143.139:0): avc: granted { load_policy } for pid=2444 exe=/usr/sbin/load_policy scontext=user_u:system_r:unconfined_t tcontext=system_u:object_r:security_t tclass=security
<6>security: 3 users, 5 roles, 583 types, 60 bools
<6>security: 54 classes, 70968 rules
<3>audit(1111637285.905:0): avc: denied { read } for pid=2621 exe=/usr/sbin/cupsd path=pipe:[31355] dev=pipefs ino=31355 scontext=user_u:system_r:cupsd_t tcontext=user_u:system_r:unconfined_t tclass=fifo_file
<3>audit(1111637285.905:0): avc: denied { write } for pid=2621 exe=/usr/sbin/cupsd path=/dev/null dev=tmpfs ino=598 scontext=user_u:system_r:cupsd_t tcontext=user_u:object_r:tmpfs_t tclass=chr_file
<3>audit(1111637285.907:0): avc: denied { search } for pid=2621 exe=/usr/sbin/cupsd name=/ dev=dm-0 ino=2 scontext=user_u:system_r:cupsd_t tcontext=system_u:object_r:file_t tclass=dir
<3>audit(1111637285.939:0): avc: denied { read } for pid=2621 exe=/usr/sbin/cupsd name=mtab dev=dm-0 ino=5352969 scontext=user_u:system_r:cupsd_t tcontext=user_u:object_r:file_t tclass=file
<3>audit(1111637285.940:0): avc: denied { getattr } for pid=2621 exe=/usr/sbin/cupsd path=/etc/mtab dev=dm-0 ino=5352969 scontext=user_u:system_r:cupsd_t tcontext=user_u:object_r:file_t tclass=file
<3>audit(1111637285.956:0): avc: denied { search } for pid=2622 exe=/bin/bash name=/ dev=tmpfs ino=592 scontext=user_u:system_r:cupsd_t tcontext=user_u:object_r:tmpfs_t tclass=dir
<3>audit(1111637285.957:0): avc: denied { read } for pid=2622 exe=/bin/bash name=tty dev=tmpfs ino=603 scontext=user_u:system_r:cupsd_t tcontext=user_u:object_r:tmpfs_t tclass=chr_file
<3>audit(1111637285.960:0): avc: denied { getattr } for pid=2622 exe=/bin/bash path=/ dev=dm-0 ino=2 scontext=user_u:system_r:cupsd_t tcontext=system_u:object_r:file_t tclass=dir
<3>audit(1111637841.957:0): avc: denied { associate } for pid=697 exe=/mnt/runtime/usr/bin/python name=source scontext=user_u:object_r:root_t tcontext=system_u:object_r:root_t tclass=filesystem
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<4>Unable to load NLS charset utf8
<4>Unable to load NLS charset utf8
<7>ISO 9660 Extensions: RRIP_1991A
<6>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<4>Unable to load NLS charset utf8
<4>Unable to load NLS charset utf8
<7>ISO 9660 Extensions: RRIP_1991A
<6>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<4>Unable to load NLS charset utf8
<4>Unable to load NLS charset utf8
<7>ISO 9660 Extensions: RRIP_1991A
<6>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<4>Unable to load NLS charset utf8
<4>Unable to load NLS charset utf8
<7>ISO 9660 Extensions: RRIP_1991A
<6>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290168, limit=1288068
<3>Buffer I/O error on device sr0, logical block 322541
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290172, limit=1288068
<3>Buffer I/O error on device sr0, logical block 322542
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290176, limit=1288068
<3>Buffer I/O error on device sr0, logical block 322543
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290180, limit=1288068
<3>Buffer I/O error on device sr0, logical block 322544
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290184, limit=1288068
<3>Buffer I/O error on device sr0, logical block 322545
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290188, limit=1288068
<3>Buffer I/O error on device sr0, logical block 322546
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290192, limit=1288068
<3>Buffer I/O error on device sr0, logical block 322547
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290196, limit=1288068
<3>Buffer I/O error on device sr0, logical block 322548
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290200, limit=1288068
<3>Buffer I/O error on device sr0, logical block 322549
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290204, limit=1288068
<3>Buffer I/O error on device sr0, logical block 322550
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290208, limit=1288068
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290212, limit=1288068
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290216, limit=1288068
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290220, limit=1288068
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290224, limit=1288068
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290228, limit=1288068
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290168, limit=1288068
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290172, limit=1288068
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290168, limit=1288068
<4>printk: 8 messages suppressed.
<3>Buffer I/O error on device sr0, logical block 322541
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290172, limit=1288068
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290168, limit=1288068
<4>printk: 1 messages suppressed.
<3>Buffer I/O error on device sr0, logical block 322541
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290172, limit=1288068
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290168, limit=1288068
<4>printk: 1 messages suppressed.
<3>Buffer I/O error on device sr0, logical block 322541
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290172, limit=1288068
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290168, limit=1288068
<4>printk: 1 messages suppressed.
<3>Buffer I/O error on device sr0, logical block 322541
<6>attempt to access beyond end of device
<6>sr0: rw=0, want=1290172, limit=1288068
<7>ISO 9660 Extensions: Microsoft Joliet Level 3
<4>Unable to load NLS charset utf8
<4>Unable to load NLS charset utf8
<7>ISO 9660 Extensions: RRIP_1991A
<6>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
<3>audit(1111640186.336:0): avc: denied { associate } for pid=697 exe=/mnt/runtime/usr/bin/python name=resolv.conf scontext=user_u:object_r:etc_runtime_t tcontext=system_u:object_r:root_t tclass=filesystem
<3>audit(1111640410.955:0): avc: granted { setbool } for pid=4997 exe=/usr/sbin/setsebool scontext=user_u:system_r:unconfined_t tcontext=system_u:object_r:security_t tclass=security
<3>audit(1111640410.969:0): avc: granted { setbool } for pid=4997 exe=/usr/sbin/setsebool scontext=user_u:system_r:unconfined_t tcontext=system_u:object_r:security_t tclass=security
<6>security: committed booleans { use_nfs_home_dirs:0, allow_execmem:1, allow_execmod:1, use_samba_home_dirs:0, allow_ypbind:0, allow_kerberos:0, read_default_t:1, httpd_unified:0, httpd_enable_cgi:0, httpd_enable_homedirs:0, httpd_ssi_exec:0, httpd_tty_comm:0, httpd_disable_trans:0, cupsd_disable_trans:0, ptal_disable_trans:0, dhcpc_disable_trans:0, dhcpd_disable_trans:0, dovecot_disable_trans:0, fingerd_disable_trans:0, ftpd_disable_trans:0, ftpd_is_daemon:0, ftp_home_dir:0, howl_disable_trans:0, i18n_input_disable_trans:0, inetd_disable_trans:0, inetd_child_disable_trans:0, innd_disable_trans:0, krb5kdc_disable_trans:0, kadmind_disable_trans:0, ktalkd_disable_trans:0, lpd_disable_trans:0, mysqld_disable_trans:0, named_disable_trans:0, named_write_master_zones:0, nscd_disable_trans:0, ntpd_disable_trans:0, portmap_disable_trans:0, postgresql_disable_trans:0, privoxy_disable_trans:0, radiusd_disable_trans:0, radvd_disable_trans:0, rlogind_disable_trans:0, nfs_export_all_rw:0, nfs_export_all_ro:0, rsync_disable_trans:0, smbd_disable_trans:0, nmbd_disable_trans:0, samba_enable_home_dirs:0, slapd_disable_trans:0, snmpd_disable_trans:0, squid_disable_trans:0, stunnel_disable_trans:0, stunnel_is_daemon:0, syslogd_disable_trans:0, telnetd_disable_trans:0, tftpd_disable_trans:0, winbind_disable_trans:0, ypbind_disable_trans:0, ypserv_disable_trans:0, zebra_disable_trans:0 }
********************************
<3>audit(1111640412.075:0): avc: denied { associate } for pid=5002 exe=/mnt/runtime/usr/sbin/lvm name=V_VolGroup00 scontext=user_u:object_r:etc_runtime_t tcontext=system_u:object_r:root_t tclass=filesystem
