authd and ident
by Mike Chambers
Ok, I was told (I Think on IRC) before of how to get authd working to
help with ident on IRC. I think there was an option or something on it
(or a file it uses) to remove to help (mainly if it was working without
doing this, the IRC username@ was scrambled). I can't even get authd to
work, much less doing the scrambling part.
Any ideas?
--
Mike Chambers
Madisonville, KY
"I didn't lose my mind...I sold it on eBay!"
19 years, 2 months
NetworkManager doesn't see eth0
by Sander Hoentjen
Hi,
I recently did a install from rawhide which went pretty smooth
considering it could have eaten all kinds of stuff such as babies.
Now I kept up2date and I am current with latest rawhide, and I installed
a wireless PCI card so I decided to turn on NetworkManager. It works in
the way that it connects me to a wireless network, but it does so even
when connected to a wired lan. It will not connect me to that wired LAN
even when there is no wireless network available. Is this a know
problem? Can I do anything about it? Does it need to go into bugzilla?
some maybe relevant output:
$ /sbin/lspci
...
00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
...
$ /sbin/lshal
...
udi = '/org/freedesktop/Hal/devices/net_52_54_05_fd_b1_9e'
info.udi = '/org/freedesktop/Hal/devices/net_52_54_05_fd_b1_9e' (string)
linux.subsystem = 'net' (string)
linux.hotplug_type = 2 (0x2) (int)
net.80203.mac_address = 90520831242654 (0x525405fdb19e) (uint64)
info.product = 'Networking Interface' (string)
net.interface_up = true (bool)
net.arp_proto_hw_id = 1 (0x1) (int)
net.linux.ifindex = 2 (0x2) (int)
net.address = '52:54:05:fd:b1:9e' (string)
net.interface = 'eth0' (string)
net.physical_device = '/org/freedesktop/Hal/devices/pci_10ec_8029' (string)
info.capabilities = {'net', 'net.80203'} (string list)
info.category = 'net.80203' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8029' (string)
linux.sysfs_path = '/sys/class/net/eth0' (string)
udi = '/org/freedesktop/Hal/devices/pci_10ec_8029'
info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8029' (string)
linux.subsystem = 'pci' (string)
linux.hotplug_type = 1 (0x1) (int)
pci.subsys_product = 'Unknown (0x0000)' (string)
pci.subsys_vendor = 'Unknown (0x0000)' (string)
info.product = 'RTL-8029(AS)' (string)
pci.product = 'RTL-8029(AS)' (string)
info.vendor = 'Realtek Semiconductor Co., Ltd.' (string)
pci.vendor = 'Realtek Semiconductor Co., Ltd.' (string)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.device_class = 2 (0x2) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.vendor_id = 4332 (0x10ec) (int)
pci.product_id = 32809 (0x8029) (int)
info.linux.driver = 'ne2k-pci' (string)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.bus = 'pci' (string)
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.0' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0' (string)
...
Sander
19 years, 2 months
Boot halts at rdisk
by Ken Nordquist
Hey Guys,
My boot froze when it hit rdisk. Fortunately, Mr. Spaleta gave me a
troubleshooting hint (because I really was not sure what was causing the
boot freeze) and I traced it to rdisk. After removing it from the boot
sequence, all seems to be swell. My arch is x86_64 and I had no
troubles with the 1276 kernel (I uploaded it the previous day) but I did
have troubles after installing today's rawhide (20050430).
Thanks for the tip Jef.
Regards,
Ken Nordquist
"Did I Do That?"
19 years, 2 months
Downloading files > 4GB not possible?
by Patrick
Hi all,
Similar to FC3 I am still unable to download files that are larger than
4GB from an Apache 2.0.52 server with large file support running on
FreeBSD. Neither wget, curl or lynx work. I'm using FC4T2 updated
(kernel 1276) and plain ext3 filesystems. A FreeBSD 4.x box as client
had no problem downloading a 9GB file. No idea about other distro's as I
don't have those. Anyone have a clue how to solve this?
TIA,
Patrick
19 years, 2 months
Re: Re: FC4 T2 installation hungs at boot option screen
by hubes hubes
Many thanks, I'll check it out.
/hubes
> Från: Oliver Kahl <k
ahlriab(a)mailbox.tu-berlin.de>
> Till: For testers of Fedora Core develop
ment releases <fedora-test-list(a)redhat.com>
> Rubrik: Re: FC4 T2 install
ation hungs at boot option screen
> Datum: Sun, 01 May 2005 01:56:13 +02
00
> similar problem where discused days before.
> Take a look here i
n the fedora-test-list from april,
> it´s a post from 22/23.04.2005:
>
> Re: CD boot problem with FC4test1 AND test2
>
> I think it could h
elp you!
>
> Oliver
>
>
>
>
> hubes hubes schrieb:
> > hi,
> >
> >
> >
> > I've tried to install FC4 T2 on my old Dell CPi (p
2 300).
> >
> > However I don’t manage to get very fare, before the fi
rst user input the
> > installation hungs.
> >
> > I don’t even get t
o see the "boot:" nor can I type “ inux text” or
> > “linux askmethod” o
r any other boot options.
> >
> >
> >
> > Any idée’s on how I can
resolve this, or even debug.
> >
> >
> >
> > I have successfully
installed FC3 over net install (ftp).
> >
> >
> >
> > Many thank
s
> >
> >
> >
> >
> > www.spray.se/kopsalj <<a href=http://www.
spray.se/kopsalj/>>http://www.spray.se/kopsalj/></a>- gör dagens
> > sup
eraffär! Välj bland 82 723 annonser.
> >
>
>
> --
> fedora-test-
list mailing list
> fedora-test-list(a)redhat.com
> To unsubscribe:
> <
a href=http://www.redhat.com/mailman/listinfo/fedora-test-list>http://www
redhat.com/mailman/listinfo/fedora-test-list</a>
10 Gigabyte Mailbox - http://mail.spray.se/?targetcode=se_footer
19 years, 2 months
NFS lockup error
by William
After running the updates from Friday around 3pm, I seem to be crashing on bootup. Everything looks fine until it gets to clvmd. It fails to load, which is no big deal but then it goes to a black screen. It stays on this black screen for a minute or two and then I hit CTRL-ALT-Delete. It will bring me back to the Services screen and says "NFS lockup: [Failed]." It then sits there for about 30 seconds and goes back to the black screen. I give it a few minuts and then hit CTRL-ALT-Delete again and it doesn't do anything. I have to manually shut down the computer. I have tried previous kernels.
I can log into WinXP fine, so I guessing it isn't a hardware failure, which was my first thought.
19 years, 2 months
Good news for x86_64 systems
by Gene C.
After kernel 1275 fixed the "constant" rebooting problem on x86_64 system, I
was eager to see how soon the other major problem could be fixed -- segfault
when running 32 bit applications.
Since rawhide had not been updated yet, I thought I would look to see if davej
had any new kernel on people.redhat.com ... sure enough, there was kernel
1276.
After downloading, I looked at the change log and it said that a fix for 32
bit applications was included. After installation and reboot I tested .. 32
bit applications now work (no segfault).
This also means that vmware-config.pl works again for those interested.
See http://people.redhat.com/davej/kernels/Fedora/
--
Gene
19 years, 2 months
log errors
by Tom Diehl
Hi all,
I have a dell inspiron 2650 with rawhide on it. For the most part it is running
flawlessly, however I keep seeing the following messages in the logs:
Apr 28 21:36:55 bullwinkle pam_timestamp_check: pam_timestamp: `/' owner UID != 0
Apr 28 21:37:30 bullwinkle last message repeated 7 times
Apr 28 21:38:35 bullwinkle last message repeated 13 times
Apr 28 21:39:40 bullwinkle last message repeated 13 times
Apr 28 21:40:44 bullwinkle last message repeated 13 times
Apr 28 21:41:09 bullwinkle last message repeated 5 times
Apr 28 21:41:11 bullwinkle ntpd[2453]: synchronized to 192.168.0.2, stratum 2
Apr 28 21:41:14 bullwinkle pam_timestamp_check: pam_timestamp: `/' owner UID != 0
Apr 28 21:41:49 bullwinkle last message repeated 7 times
Apr 28 21:42:54 bullwinkle last message repeated 13 times
Apr 28 21:43:19 bullwinkle last message repeated 5 times
Apr 28 21:43:22 bullwinkle ntpd[2453]: kernel time sync enabled 0001
Apr 28 21:43:24 bullwinkle pam_timestamp_check: pam_timestamp: `/' owner UID != 0
Apr 28 21:43:55 bullwinkle last message repeated 6 times
Apr 28 21:45:00 bullwinkle last message repeated 13 times
Apr 28 21:46:05 bullwinkle last message repeated 13 times
Apr 28 21:47:10 bullwinkle last message repeated 13 times
Apr 28 21:48:15 bullwinkle last message repeated 13 times
Apr 28 21:49:20 bullwinkle last message repeated 13 times
Apr 28 21:50:25 bullwinkle last message repeated 13 times
Apr 28 21:51:30 bullwinkle last message repeated 13 times
Apr 28 21:51:55 bullwinkle last message repeated 5 times
Apr 28 21:51:56 bullwinkle kernel: codec_semaphore: semaphore is not ready [0x1][0x300300]
Apr 28 21:51:56 bullwinkle kernel: codec_read 0: semaphore is not ready for register 0x2c
Apr 28 21:52:00 bullwinkle pam_timestamp_check: pam_timestamp: `/' owner UID != 0
Apr 28 21:52:30 bullwinkle last message repeated 6 times
Any idea what is causing the pam_timestamp or the codec_semaphore messages or
how to fix them?
Regards,
Tom Diehl tdiehl(a)rogueind.com Spamtrap address mtd123(a)rogueind.com
19 years, 2 months
