test January 2006

test@lists.fedoraproject.org

276 participants
503 discussions

Screensaver in KDE?
by Mike Leahy 30 Jan '06

30 Jan '06

Has anyone had a problem opening the Screensaver settings in the KDE control settings? When I try to open it from the main desktop menu, I get a dialogue saying: "The specified library screensaver could not be found The Diagnostic is: libGL.so.1: cannot enable executable stack as shared object requires: Permision denied Possible reasons: - An error occurred during your last KDE upgrade leaving an orphaned control module - You have old third party modules lying around." Any clues as to what might cause and/or fix this? I did notice error messages while running yum updates a couple days ago (sorry, I didn't save them), but nothing seemed particularly fatal at the time, and the updates seemed to complete regardless. Mike

2 2

rawhide report: 20060130 changes
by Build System 30 Jan '06

30 Jan '06

Updated Packages: xorg-x11-server-1.0.1-1 ----------------------- * Wed Jan 18 2006 Mike A. Harris <mharris(a)redhat.com> 1.0.1-1 - Updated to xserver 1.0.1 from X11R7.0 Broken deps for i386 ---------------------------------------------------------- GFS-kernel - 2.6.14.1-20051219.162641.FC5.9.i686 requires kernel = 0:2.6.15-1.1826.2.10_FC5 GFS-kernel - 2.6.14.1-20051219.162641.FC5.9.i686 requires /lib/modules/2.6.15-1.1826.2.10_FC5 GFS-kernel-smp - 2.6.14.1-20051219.162641.FC5.9.i686 requires /lib/modules/2.6.15-1.1826.2.10_FC5smp GFS-kernel-smp - 2.6.14.1-20051219.162641.FC5.9.i686 requires kernel-smp = 0:2.6.15-1.1826.2.10_FC5 cman-kernel - 2.6.14.1-20051219.162641.FC5.10.i686 requires kernel = 0:2.6.15-1.1826.2.10_FC5 cman-kernel - 2.6.14.1-20051219.162641.FC5.10.i686 requires /lib/modules/2.6.15-1.1826.2.10_FC5 cman-kernel-smp - 2.6.14.1-20051219.162641.FC5.10.i686 requires /lib/modules/2.6.15-1.1826.2.10_FC5smp cman-kernel-smp - 2.6.14.1-20051219.162641.FC5.10.i686 requires kernel-smp = 0:2.6.15-1.1826.2.10_FC5 dlm-kernel - 2.6.14.1-20051219.162641.FC5.8.i686 requires kernel = 0:2.6.15-1.1826.2.10_FC5 dlm-kernel - 2.6.14.1-20051219.162641.FC5.8.i686 requires /lib/modules/2.6.15-1.1826.2.10_FC5 dlm-kernel-smp - 2.6.14.1-20051219.162641.FC5.8.i686 requires /lib/modules/2.6.15-1.1826.2.10_FC5smp dlm-kernel-smp - 2.6.14.1-20051219.162641.FC5.8.i686 requires kernel-smp = 0:2.6.15-1.1826.2.10_FC5 gnbd-kernel - 2.6.14.0-20051108.134753.FC5.14.i686 requires kernel = 0:2.6.15-1.1826.2.10_FC5 gnbd-kernel - 2.6.14.0-20051108.134753.FC5.14.i686 requires /lib/modules/2.6.15-1.1826.2.10_FC5 gnbd-kernel-smp - 2.6.14.0-20051108.134753.FC5.14.i686 requires /lib/modules/2.6.15-1.1826.2.10_FC5smp gnbd-kernel-smp - 2.6.14.0-20051108.134753.FC5.14.i686 requires kernel-smp = 0:2.6.15-1.1826.2.10_FC5 Broken deps for ia64 ---------------------------------------------------------- rgmanager - 1.9.31-3.ia64 requires ccs Broken deps for ppc ---------------------------------------------------------- ccs-devel - 1.0.2-3.1.ppc requires ccs = 0:1.0.2-3.1 gulm - 1.0.4-2.FC5.1.ppc requires ccs Broken deps for ppc64 ---------------------------------------------------------- cman - 1.0.3-5.FC5.ppc64 requires cman-kernel-modules >= 0:2.6.11 dlm - 1.0.0-7.FC5.ppc64 requires dlm-kernel-modules >= 0:2.6.11 emacs - 21.4-5.ppc64 requires fonts-xorg-75dpi gnbd - 1.0.1-2.ppc64 requires gnbd-kernel-modules >= 0:2.6.11 Broken deps for s390 ---------------------------------------------------------- systemtap - 0.5.3-2.s390 requires kernel >= 0:2.6.9-11 systemtap - 0.5.3-2.s390 requires kernel-devel Broken deps for s390x ---------------------------------------------------------- libvte-java - 0.11.11-7.s390x requires libgtkjava-2.8.so()(64bit) libvte-java - 0.11.11-7.s390x requires libgtkjni-2.8.so()(64bit) systemtap - 0.5.3-2.s390x requires kernel >= 0:2.6.9-11 systemtap - 0.5.3-2.s390x requires kernel-devel Broken deps for x86_64 ---------------------------------------------------------- GFS-kernel - 2.6.14.1-20051219.162641.FC5.9.x86_64 requires kernel = 0:2.6.15-1.1826.2.10_FC5 GFS-kernel - 2.6.14.1-20051219.162641.FC5.9.x86_64 requires /lib/modules/2.6.15-1.1826.2.10_FC5 cman-kernel - 2.6.14.1-20051219.162641.FC5.10.x86_64 requires kernel = 0:2.6.15-1.1826.2.10_FC5 cman-kernel - 2.6.14.1-20051219.162641.FC5.10.x86_64 requires /lib/modules/2.6.15-1.1826.2.10_FC5 dlm-kernel - 2.6.14.1-20051219.162641.FC5.8.x86_64 requires kernel = 0:2.6.15-1.1826.2.10_FC5 dlm-kernel - 2.6.14.1-20051219.162641.FC5.8.x86_64 requires /lib/modules/2.6.15-1.1826.2.10_FC5 gnbd-kernel - 2.6.14.0-20051108.134753.FC5.14.x86_64 requires kernel = 0:2.6.15-1.1826.2.10_FC5 gnbd-kernel - 2.6.14.0-20051108.134753.FC5.14.x86_64 requires /lib/modules/2.6.15-1.1826.2.10_FC5

4 3

Hibernate issues on FC5T2...
by Mike Leahy 30 Jan '06

30 Jan '06

Hello list, I've played around a bit with FC5T2, and I found that the hibernate sort-of worked. On my first attempt it wouldn't un-hibernate. At some point (after a reinstall) it worked fine. Since then, I have performed all the updates using yum (I have updated everything as of 5 minutes ago), and I've started using KDE for my desktop. However, when I try to hibernate now, I get a blank screen, which eventually prints errors indicating some problem accessing the fd0 device. I don't have a floppy disk on my laptop, so the fact that it can't access it is no surprise. If I wait long enough, I'm returned to the desktop with the following output: sudo /usr/sbin/pm-hibernate GNU GRUB version 0.97 (640K lower / 3072K upper memory) [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename.] grub> savedefault --default=0 --once grub> /usr/sbin/pm-hibernate: line 24: echo: write error: No such device Would this be related to any of the updates, and/or my switch to KDE? I tried a bit of hacking around with the pm-hibernate script, that certainly didn't improve anything. Any suggestions? Mike

2 1

How to get WPA-Support with NetworkManager?
by Roger Grosswiler 30 Jan '06

30 Jan '06

Hey, read about WPA-support with NetworkManager. How can i get this? I have already wpa_suuplicant in use... Roger

9 23

Kernel compilation from src.rpm
by Stephane Gaucher 30 Jan '06

30 Jan '06

Is it possible to re-compile the exact kernel from the kernel- xyz.src.rpm !?!

4 5

nightly boot.iso installer hangs at step network
by David Timms 30 Jan '06

30 Jan '06

On a HP compaq nx9000 notebook, 512M ram, in text mode, using boot.iso (from CD) (2005-01-30 ?) the installer hangs during/after the: moving (1) to step networkdevicecheck moving (1) to step network This is occurring with either the network is set to dhcp or static address in the installer. The terminal on Alt-F2 is still responsive: top -d 1 shows STATUS RSS PPID %CPU %MEM COMMAND R 844 476 0.9 0.1 top S 1972 334 0.0 11.3 anaconda After ten+ minutes, there is no change.

1 0

Question regarding openGL screensavers (with xorg ati driver)
by Andy Burns 30 Jan '06

30 Jan '06

Running current rawhide, with xorg drivers for my ATI card, I have xscreensaver + extras + glextras installed, regardless of whether I use xorg vesa drivers, xorg ati drivers or xorg ati drivers with EXA extensions I can't get any of the openGL screensavers to start they all give messages similar to ... X error in glplanet: X Error of failed request: BadAlloc (insufficient resources for operation) Major opcode of failed request: 143 (GLX) Minor opcode of failed request: 3 (X_GLXCreateContext) Serial number of failed request: 111 Current serial number in output stream: 112 I was beginning to think this might only be expected to work with the ATI proprietary drivers, however yesterday I was tunneling X over SSH to my laptop running cygwin/X and I noticed that the openGL screensavers all worked that way (and with quite an impressive speed considering the tunnel was over WiFi) Is it expecting too much of the current xorg drivers to support GLX (I thought MESA should at least step in as a software renderer as last resort) or should I bugzilla this?

2 2

SELinux still giving errors on boot-time
by Roger Grosswiler 30 Jan '06

30 Jan '06

Still there, see this: SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts audit(1138275326.096:2): avc: denied { write } for pid=387 comm="restorecon" name="[982]" dev=pipefs ino=982 scontext=system_u:system_r:restorecon_t:s0 tcontext=system_u:system_r:restorecon_t:s0 tclass=fifo_file audit(1138275326.108:3): avc: denied { read } for pid=386 comm="restorecon" name="[982]" dev=pipefs ino=982 scontext=system_u:system_r:restorecon_t:s0 tcontext=system_u:system_r:restorecon_t:s0 tclass=fifo_file Roger

6 5

HELP: "PCI: Fail to allocate mem resource
by Reg Clemens 30 Jan '06

30 Jan '06

What does this mean/imply? Right after the "Uncompressing Linux" line of the boot, I see the line PCI: Failed to allocate the mem resource #6:20000@48000000 for 0000:01:00.0 when I boot 2.6.15.1. When I boot 2.6.11, there is no such message. This is on an Intel D945Gnt motherboard with a 3.2GHz Pentium4. This motherboard has online video/sound/ethernet, tho none of these work with Linux (ok the video works marginally) I have added an nvidia 6600 video card, a soundblaster 24 (not working yet) and a D-Link ethernet adapter. I pulled everything but the video card but still get the same error message... Really would like to get this system working... -- Reg.Clemens reg(a)dwf.com

2 2

FC5T2 - not ready for prime time.
by Reg Clemens 30 Jan '06

30 Jan '06

I know people work hard on these releases, but some bugs should be obvious... I downloaded the 5bin cds yesterday, and tried to install it in an extra partition on my disk (3.2GHz Pentium4, 945Gnt Motherboard). Probably 8 out of 10 times the installer died while I was picking packages to install. Each time it would pop up a message box saying something to the effect 'this is a bug' and describing how to report it. OK, with repeated beating, on at least two attempts I got by the 'picking packages' bug and got to the actual install. In both cases I got somewhere late on the 1st CD (the ribbon showed that I was about 50% installed), and now it complains about an unexpected interrupt, pops up a message box and dies. Not nice. And WHAT WAS WRONG WITH THE PREVIOUS install program, it seems to have worked fine ever since RedHat5 or 6. Why is it being replaced with something that is not even debugged? Guess Ill wait and give it another try when FC5T3 is available, but this doesnt leave a very good feeling in my stomach... All I wanted to do was see if this release supports the Intel 945 Motherboards (It appears it does), but Im not going to try the support till I can at least install a system. Sigh. -- Reg.Clemens reg(a)dwf.com

11 28

← Newer
1
2
3
4
5
6
7
8
9
...
51
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test January 2006