test October 2006

test@lists.fedoraproject.org

191 participants
367 discussions

NVIDIA Question
by David St.Clair 17 Jan '22

17 Jan '22

This may be a dumb question, but why can't Redhat distribute NVIDIA binary drivers? In NVIDIA's licence (http://www.nvidia.com/object/nv_swlicense.html) it says: "2.1.2 Linux Exception. Notwithstanding the foregoing terms of Section 2.1.1, SOFTWARE designed exclusively for use on the Linux operating system may be copied and redistributed, provided that the binary files thereof are not modified in any way (except for unzipping of compressed files)." So, what's keeping RedHat from putting the drivers in the distribution? If it's a GPL thing, would it be easy to just download it during installation or at least give the option to the user? Thanks, -- David St.Clair dstclair(a)cs.wcu.edu

10 20

Mouse goes crazy
by Jonathan Villa 17 Jan '22

17 Jan '22

Ok, I have had Yarrow working well for a while now, but yesterday I started experiencing some odd issues with my mouse. All of a sudden it stops working correctly. The only thing that seems to fix is to kill X and run mouse-test, then restart. Any ideas? Also, I have FC 1 running on a desktop which is hooked up to a KVM switch. Whenever I go to another PC, and return, the same thing happens, the mouse goes crazy. ???

8 7

Re: rawhide report: 20050419 changes
by Ray Strode 22 Nov '15

22 Nov '15

Hi, > Will yelp in FC4 be able to search and display man/info pages Yea, man and info pages work for me. --Ray

2 2

Mouse Wheel gone
by Christian Menzel 22 Nov '15

22 Nov '15

Since the latest xorg-X11 upgrade I receive the already mentioned XKB error and the mouse wheel is not working anymore. Has anybody seen this behavior? Regards Chris

3 3

Re: NFS failure
by Fulko.Hew＠sita.aero 22 Nov '15

22 Nov '15

Damian Menscher <menscher(a)uiuc.edu>@redhat.com on 04/07/2004 04:57:13 PM wrote: > On Wed, 7 Apr 2004, Jeff Elkins wrote: > > > I'm getting failure messages on my nfs mounts i.e. : > > > > mount to NFS server 'music.elkins' failed: server is down. > > > > nsfd appears to be running and I didn't see anything suspicious in the logs. > > The servers are up and running and have other clients connected. > > You didn't mention what steps you took to debug it: > > Can you ping the server? > What is the output of rpcinfo -p servername? > Does the server have access restrictions (firewall, TCP Wrappers, etc)? I have the same symptoms... rpcinfo says that nfs et.al. are running. Something has changed in test 2, since the same PC running RH9 accesses that host just fine.

7 9

rpmfluff: a lightweight tool for generating broken RPMs
by David Malcolm 23 Jul '08

23 Jul '08

This may be of interest to people working on tools such as rpmlint. Hope this helps Dave

2 1

Re: Realtek RTL8111B fc6 problems
by Gianluca Cecchi 13 Nov '06

13 Nov '06

Boris, you are great! Finally it works! And it seems quite good. Ok, I did this. - downloaded kernel-2.6.18-1.2747.fc6.src.rpm - install the src.rpm - changed spec file putting 1 only in %define buildsmp 1 and %define includexen 1 - done an rpmbuild -bp - applied the further patch you outlined r8169.c - gone into /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i386/ - make - make modules_install - copy under /boot of the vmlinuz file generated - mkinitrd for the new kernel - reboot Network seems to work. lspci gives 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI E xpress Gigabit Ethernet controller (rev 01) lspci -v gives: 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI E xpress Gigabit Ethernet controller (rev 01) Subsystem: ASUSTeK Computer Inc. Unknown device 81aa Flags: bus master, fast devsel, latency 0, IRQ 177 I/O ports at a800 [size=256] Memory at ff5ff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at ff5c0000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable - Capabilities: [60] Express Endpoint IRQ 0 Capabilities: [84] Vendor Specific Information I'm not inside a lan so I can only test through the dsl modem. This kind of connectivity seems quite good at the moment. Eventually I can connect a laptop through cross cable and give other kind of results obtained. Tell me if you like. Francois, I'm going to send e-mail to the netdev address you gave. The lspci -vvx for the adapter is: 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: ASUSTeK Computer Inc. Unknown device 81aa Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2 B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <P ERR- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 177 Region 0: I/O ports at a800 [size=256] Region 2: Memory at ff5ff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at ff5c0000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Vital Product Data Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [60] Express Endpoint IRQ 0 Device: Supported: MaxPayload 1024 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <1us, L1 unlimited Device: AtnBtn+ AtnInd+ PwrInd+ Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Capabilities: [84] Vendor Specific Information 00: ec 10 68 81 07 00 10 00 01 00 00 02 08 00 00 00 10: 01 a8 00 00 00 00 00 00 04 f0 5f ff 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 aa 81 30: 00 00 5c ff 40 00 00 00 00 00 00 00 0a 01 00 00 Gianluca

5 7

fc6 install fails: No handler for logger yum.YumBase
by sean darcy 06 Nov '06

06 Nov '06

I'm trying to upgrade fc5 - fc6. Got fc6 dvd iso over bittorrent. sha1sum matches. media check is OK. I get to " Checking dependencies in packages selected for installation" and the blue bar shows 0% Then "No handler could be found for logger "yum.YumBase" " Couldn't find anything in bugzilla. There some magic needed here? sean

7 12

Fedora Core 6 Common Issues
by Rahul Sundaram 03 Nov '06

03 Nov '06

Hi http://fedoraproject.org/wiki/Bugs/FC6Common We are in pretty good shape for this release. If you have any bugs that needed to be added to this page and you have wiki access, go ahead or let me know with the bugzilla report number. Offlist even. Rahul

3 3

FC5 system-config-users package not signed
by Gilbert Sebenste 02 Nov '06

02 Nov '06

Just FYI...yum barfs on it when it tries to install it. ******************************************************************************* Gilbert Sebenste ******** (My opinions only!) ****** *******************************************************************************

3 3

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test October 2006