test March 2006

test@lists.fedoraproject.org

277 participants
511 discussions

rawhide report: 20060327 changes
by Build System 27 Mar '06

27 Mar '06

Updated Packages: mgetty-1.1.33-7.FC5.3 --------------------- * Mon Mar 27 2006 Miloslav Trmac <mitr(a)redhat.com> - 1.1.33-7.FC5.3 - Change BuildPrereq from texinfo to texinfo-tex texinfo-4.8-11 -------------- * Sat Mar 25 2006 Miloslav Trmac <mitr(a)redhat.com> - 4.8-11 - Split texinfo-tex from the texinfo package (#178406) - Ship COPYING, don't ship INSTALL Broken deps for i386 ---------------------------------------------------------- GFS-kernel - 2.6.15.1-5.FC5.17.i686 requires /lib/modules/2.6.15-1.2054_FC5 GFS-kernel - 2.6.15.1-5.FC5.17.i686 requires kernel = 0:2.6.15-1.2054_FC5 GFS-kernel-smp - 2.6.15.1-5.FC5.17.i686 requires /lib/modules/2.6.15-1.2054_FC5smp GFS-kernel-smp - 2.6.15.1-5.FC5.17.i686 requires kernel-smp = 0:2.6.15-1.2054_FC5 GFS-kernel-xen0 - 2.6.15.1-5.FC5.17.i686 requires kernel-xen0 = 0:2.6.15-1.2054_FC5 GFS-kernel-xenU - 2.6.15.1-5.FC5.17.i686 requires /lib/modules/2.6.15-1.2054_FC5xenU GFS-kernel-xenU - 2.6.15.1-5.FC5.17.i686 requires kernel-xenU = 0:2.6.15-1.2054_FC5 cman-kernel - 2.6.15.1-0.FC5.16.i686 requires /lib/modules/2.6.15-1.2054_FC5 cman-kernel - 2.6.15.1-0.FC5.16.i686 requires kernel = 0:2.6.15-1.2054_FC5 cman-kernel-smp - 2.6.15.1-0.FC5.16.i686 requires /lib/modules/2.6.15-1.2054_FC5smp cman-kernel-smp - 2.6.15.1-0.FC5.16.i686 requires kernel-smp = 0:2.6.15-1.2054_FC5 cman-kernel-xen0 - 2.6.15.1-0.FC5.16.i686 requires kernel-xen0 = 0:2.6.15-1.2054_FC5 cman-kernel-xenU - 2.6.15.1-0.FC5.16.i686 requires /lib/modules/2.6.15-1.2054_FC5xenU cman-kernel-xenU - 2.6.15.1-0.FC5.16.i686 requires kernel-xenU = 0:2.6.15-1.2054_FC5 dlm-kernel - 2.6.15.1-0.FC5.14.i686 requires /lib/modules/2.6.15-1.2054_FC5 dlm-kernel - 2.6.15.1-0.FC5.14.i686 requires kernel = 0:2.6.15-1.2054_FC5 dlm-kernel-smp - 2.6.15.1-0.FC5.14.i686 requires /lib/modules/2.6.15-1.2054_FC5smp dlm-kernel-smp - 2.6.15.1-0.FC5.14.i686 requires kernel-smp = 0:2.6.15-1.2054_FC5 dlm-kernel-xen0 - 2.6.15.1-0.FC5.14.i686 requires kernel-xen0 = 0:2.6.15-1.2054_FC5 dlm-kernel-xenU - 2.6.15.1-0.FC5.14.i686 requires /lib/modules/2.6.15-1.2054_FC5xenU dlm-kernel-xenU - 2.6.15.1-0.FC5.14.i686 requires kernel-xenU = 0:2.6.15-1.2054_FC5 gnbd-kernel - 2.6.15-5.FC5.23.i686 requires /lib/modules/2.6.15-1.2054_FC5 gnbd-kernel - 2.6.15-5.FC5.23.i686 requires kernel = 0:2.6.15-1.2054_FC5 gnbd-kernel-smp - 2.6.15-5.FC5.23.i686 requires /lib/modules/2.6.15-1.2054_FC5smp gnbd-kernel-smp - 2.6.15-5.FC5.23.i686 requires kernel-smp = 0:2.6.15-1.2054_FC5 gnbd-kernel-xen0 - 2.6.15-5.FC5.23.i686 requires kernel-xen0 = 0:2.6.15-1.2054_FC5 gnbd-kernel-xenU - 2.6.15-5.FC5.23.i686 requires /lib/modules/2.6.15-1.2054_FC5xenU gnbd-kernel-xenU - 2.6.15-5.FC5.23.i686 requires kernel-xenU = 0:2.6.15-1.2054_FC5 Broken deps for ia64 ---------------------------------------------------------- rgmanager - 1.9.31-3.ia64 requires ccs Broken deps for ppc64 ---------------------------------------------------------- avalon-logkit - 1.2-3jpp_3fc.noarch requires servletapi5 castor-demo - 0.9.5-1jpp_2fc.noarch requires servletapi5 emacs - 21.4-5.ppc64 requires fonts-xorg-75dpi geronimo-specs - 1.0-0.M2.2jpp_7fc.ppc64 requires servletapi5 hsqldb - 1.80.1-1jpp_8fc.ppc64 requires servletapi5 jakarta-commons-fileupload - 1:1.0-3jpp_5fc.noarch requires servletapi5 jakarta-taglibs-standard - 1.1.1-4jpp_3fc.noarch requires servletapi5 >= 0:5.0.16 struts - 1.2.8-2jpp_9fc.ppc64 requires servletapi5 struts-webapps-tomcat5 - 1.2.8-2jpp_9fc.ppc64 requires tomcat5 velocity - 1.4-3jpp_4fc.noarch requires servletapi5 xalan-j2-demo - 2.6.0-3jpp_9fc.ppc64 requires servletapi5 Broken deps for s390 ---------------------------------------------------------- avalon-logkit - 1.2-3jpp_3fc.noarch requires servletapi5 castor-demo - 0.9.5-1jpp_2fc.noarch requires servletapi5 geronimo-specs - 1.0-0.M2.2jpp_7fc.s390 requires servletapi5 hsqldb - 1.80.1-1jpp_8fc.s390 requires servletapi5 jakarta-commons-fileupload - 1:1.0-3jpp_5fc.noarch requires servletapi5 jakarta-taglibs-standard - 1.1.1-4jpp_3fc.noarch requires servletapi5 >= 0:5.0.16 rhythmbox - 0.8.8-2.s390 requires libgstgconf-0.8.so.0 rhythmbox - 0.8.8-2.s390 requires libgstreamer-0.8.so.1 rhythmbox - 0.8.8-2.s390 requires libgstcontrol-0.8.so.1 struts - 1.2.8-2jpp_9fc.s390 requires servletapi5 struts-webapps-tomcat5 - 1.2.8-2jpp_9fc.s390 requires tomcat5 velocity - 1.4-3jpp_4fc.noarch requires servletapi5 xalan-j2-demo - 2.6.0-3jpp_9fc.s390 requires servletapi5 xmlrpc - 2.0.1-1jpp_6fc.s390 requires servletapi5 Broken deps for s390x ---------------------------------------------------------- avalon-logkit - 1.2-3jpp_3fc.noarch requires servletapi5 castor-demo - 0.9.5-1jpp_2fc.noarch requires servletapi5 geronimo-specs - 1.0-0.M2.2jpp_7fc.s390x requires servletapi5 hsqldb - 1.80.1-1jpp_8fc.s390x requires servletapi5 jakarta-commons-fileupload - 1:1.0-3jpp_5fc.noarch requires servletapi5 jakarta-taglibs-standard - 1.1.1-4jpp_3fc.noarch requires servletapi5 >= 0:5.0.16 rhythmbox - 0.8.8-2.s390x requires libgstcontrol-0.8.so.1()(64bit) rhythmbox - 0.8.8-2.s390x requires libgstgconf-0.8.so.0()(64bit) rhythmbox - 0.8.8-2.s390x requires libgstreamer-0.8.so.1()(64bit) struts - 1.2.8-2jpp_9fc.s390x requires servletapi5 struts-webapps-tomcat5 - 1.2.8-2jpp_9fc.s390x requires tomcat5 velocity - 1.4-3jpp_4fc.noarch requires servletapi5 xalan-j2-demo - 2.6.0-3jpp_9fc.s390x requires servletapi5 Broken deps for x86_64 ---------------------------------------------------------- GFS-kernel - 2.6.15.1-5.FC5.17.x86_64 requires /lib/modules/2.6.15-1.2054_FC5 GFS-kernel - 2.6.15.1-5.FC5.17.x86_64 requires kernel = 0:2.6.15-1.2054_FC5 cman-kernel - 2.6.15.1-0.FC5.16.x86_64 requires /lib/modules/2.6.15-1.2054_FC5 cman-kernel - 2.6.15.1-0.FC5.16.x86_64 requires kernel = 0:2.6.15-1.2054_FC5 dlm-kernel - 2.6.15.1-0.FC5.14.x86_64 requires /lib/modules/2.6.15-1.2054_FC5 dlm-kernel - 2.6.15.1-0.FC5.14.x86_64 requires kernel = 0:2.6.15-1.2054_FC5 gnbd-kernel - 2.6.15-5.FC5.23.x86_64 requires /lib/modules/2.6.15-1.2054_FC5 gnbd-kernel - 2.6.15-5.FC5.23.x86_64 requires kernel = 0:2.6.15-1.2054_FC5

1 0

Yum upgrade not working.
by tony 27 Mar '06

27 Mar '06

I have a machine that I _have_ to upgrade via yum (no CD drive and no bootable USB key). Yesterday I managed to upgrade from FC2 to FC4. I then installed the fedora-release-5-5.noarch.rpm Reboot and yum -y upgrade but yum only sees the FC4 repository... Any clues greatly appreciated. Tony

6 12

dm-striped device sizes must be multiple of chunk-size. FC5 and rawhide
by Dwaine Garden 27 Mar '06

27 Mar '06

Upgrading to kernel 2.6.16-2088 and I'm getting the following error when booting. device-mapper: dm-stripe: Target length not divisible by chunk size. device-mapper: error adding target to table. There was a patch submitted to 2.6.16, that limits dm-stripe to targets that are multiples of the chunk size. [PATCH] dm stripe: Fix bounds The dm-stripe target currently does not enforce that the size of a stripe device be a multiple of the chunk-size. Under certain conditions, this can lead to I/O requests going off the end of an underlying device. This test-case shows one example. echo "0 100 linear /dev/hdb1 0" | dmsetup create linear0 echo "0 100 linear /dev/hdb1 100" | dmsetup create linear1 echo "0 200 striped 2 32 /dev/mapper/linear0 0 /dev/mapper/linear1 0" | \ dmsetup create stripe0 dd if=/dev/zero of=/dev/mapper/stripe0 bs=1k This will produce the output: dd: writing '/dev/mapper/stripe0': Input/output error 97+0 records in 96+0 records out And in the kernel log will be: attempt to access beyond end of device dm-0: rw=0, want=104, limit=100 The patch will check that the table size is a multiple of the stripe chunk-size when the table is created, which will prevent the above striped device from being created. This should not affect tools like LVM or EVMS, since in all the cases I can think of, striped devices are always created with the sizes being a multiple of the chunk-size. The size of a stripe device must be a multiple of its chunk-size. (akpm: that typecast is quite gratuitous) Signed-off-by: Kevin Corry <kevcorry(a)us.ibm.com> Signed-off-by: Alasdair G Kergon <agk(a)redhat.com> Signed-off-by: Andrew Morton <akpm(a)osdl.org> Signed-off-by: Linus Torvalds <torvalds(a)osdl.org> I have tried setting the bios chunck size to 64, 32, 16k and re-installed from the DVD. I used both FC5T3 and FC5 install DVD. I have tried 8 times with re-installs. It would seem that a computer with dm-stripe can not be further upgraded because of the patch which was submitted to 2.6.16 kernel. The patch is perfectly good, to fix a problem. How do you fix the stripe so it is a multiple of chunk-size? If we can not fix it manually, we should notify people not to use dmraid with Bios software raid. I'm going to submit a bug report for this. dmsetup status via_ecfdfiehfa: 0 312499998 striped VolGroup00-LogVol01: 0 4063232 linear VolGroup00-LogVol00: 0 308150272 linear via_ecfdfiehfap2: 0 312287535 linear via_ecfdfiehfap1: 0 208782 linear *** Active Set name : via_ecfdfiehfa size : 312499998 stride : 128 type : stripe status : ok subsets: 0 devs : 2 spares : 0

1 1

test - please ignore
by Aryanto Rachmad 27 Mar '06

27 Mar '06

sorry. I need to test my email setup.

1 0

SATA access beyond end of device - How to fix
by Dwaine Garden 27 Mar '06

27 Mar '06

I'm getting the following under Fedora 5 and 6 rawhide. Because of this situation, I can not use a kernel higher than 2.6.15-1.2041_FC5smp. 2064 kernal complains that device-mapper can not divide by chunk size. Logical volume was created by Fedora 5 test2 installation DVD. How would some sorry soul resolve this? PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 0 Mar 21 20:42:30 www kernel: sata_via 0000:00:0f.0: routed to hard irq line 0 Mar 21 20:42:30 www kernel: ata1: SATA max UDMA/133 cmd 0xBC00 ctl 0xC002 bmdma 0xCC00 irq 16 Mar 21 20:42:30 www kernel: ata2: SATA max UDMA/133 cmd 0xC400 ctl 0xC802 bmdma 0xCC08 irq 16 Mar 21 20:42:30 www kernel: ata1: SATA link up 1.5 Gbps (SStatus 113) Mar 21 20:42:30 www kernel: ata1: dev 0 ATA-7, max UDMA/133, 156250000 sectors: LBA48 Mar 21 20:42:30 www kernel: ata1: dev 0 configured for UDMA/133 Mar 21 20:42:30 www kernel: scsi0 : sata_via Mar 21 20:42:30 www kernel: ata2: SATA link up 1.5 Gbps (SStatus 113) Mar 21 20:42:30 www kernel: ata2: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA Mar 21 20:42:30 www kernel: ata2: dev 0 configured for UDMA/133 Mar 21 20:42:30 www kernel: scsi1 : sata_via Mar 21 20:42:30 www kernel: Vendor: ATA Model: WDC WD800JD-75LS Rev: 09.0 Mar 21 20:42:30 www kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 21 20:42:30 www kernel: SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB) Mar 21 20:42:30 www kernel: sda: Write Protect is off Mar 21 20:42:30 www kernel: SCSI device sda: drive cache: write back Mar 21 20:42:30 www kernel: SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB) Mar 21 20:42:30 www kernel: sda: Write Protect is off Mar 21 20:42:30 www kernel: SCSI device sda: drive cache: write back Mar 21 20:42:30 www kernel: sda: sda1 sda2 sda3 Mar 21 20:42:30 www kernel: sd 0:0:0:0: Attached scsi disk sda Mar 21 20:42:30 www kernel: Vendor: ATA Model: WDC WD800JD-22JN Rev: 05.0 Mar 21 20:42:30 www kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 21 20:42:30 www kernel: SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) Mar 21 20:42:30 www kernel: sdb: Write Protect is off Mar 21 20:42:30 www kernel: SCSI device sdb: drive cache: write back Mar 21 20:42:30 www kernel: SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) Mar 21 20:42:30 www kernel: sdb: Write Protect is off Mar 21 20:42:30 www kernel: SCSI device sdb: drive cache: write back Mar 21 20:42:30 www kernel: sdb: unknown partition table Mar 21 20:42:30 www kernel: sd 1:0:0:0: Attached scsi disk sdb Mar 21 20:42:30 www kernel: device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel(a)redhat.com Mar 21 20:42:30 www kernel: attempt to access beyond end of device Mar 21 20:42:30 www kernel: sda: rw=0, want=156250010, limit=156250000 Mar 21 20:42:30 www kernel: Buffer I/O error on device dm-0, logical block 156249996 Mar 21 20:42:30 www kernel: attempt to access beyond end of device Mar 21 20:42:30 www kernel: sda: rw=0, want=156250012, limit=156250000 Mar 21 20:42:30 www kernel: Buffer I/O error on device dm-0, logical block 156249997 Mar 21 20:42:30 www kernel: attempt to access beyond end of device Mar 21 20:42:30 www kernel: sda: rw=0, want=156250014, limit=156250000 Mar 21 20:42:30 www kernel: Buffer I/O error on device dm-0, logical block 156249998 Mar 21 20:42:30 www kernel: attempt to access beyond end of device Mar 21 20:42:30 www kernel: sda: rw=0, want=156250010, limit=156250000 Mar 21 20:42:30 www kernel: Buffer I/O error on device dm-0, logical block 156249996 Mar 21 20:42:30 www kernel: attempt to access beyond end of device Mar 21 20:42:30 www kernel: sda: rw=0, want=156250012, limit=156250000 Mar 21 20:42:30 www kernel: Buffer I/O error on device dm-0, logical block 156249997 Mar 21 20:42:30 www kernel: attempt to access beyond end of device Mar 21 20:42:30 www kernel: sda: rw=0, want=156250014, limit=156250000 Mar 21 20:42:30 www kernel: Buffer I/O error on device dm-0, logical block 156249998 Mar 21 20:42:30 www kernel: EXT3-fs: INFO: recovery required on readonly filesystem. Mar 21 20:42:30 www kernel: EXT3-fs: write access will be enabled during recovery. Mar 21 20:42:30 www kernel: kjournald starting. Commit interval 5 seconds Mar 21 20:42:31 www kernel: EXT3-fs: dm-4: orphan cleanup on readonly fs Mar 21 20:42:31 www kernel: EXT3-fs: dm-4: 5 orphan inodes deleted Mar 21 20:42:31 www kernel: EXT3-fs: recovery complete. Mar 21 20:42:31 www kernel: EXT3-fs: mounted filesystem with ordered data mode

3 7

FC5 issues
by Marcin Grabda 26 Mar '06

26 Mar '06

Hi. I installed FC5 today and after that I updated all packages with yum. I experienced some small but annoying problems. Beagle doesn't start with desktop even if I specify to do that in "preferences -> search & indexing" options. Second problem is that my "home" icon on desktop is still changing its position after my logout. When I login it is still in other place, below the trash icon. I tried also to change some options with gconf-editor, but it is hard since gconf-editor is crashing after changing any option.\ Here is output from console: *** glibc detected *** gconf-editor: double free or corruption (out): 0x09891380 *** ======= Backtrace: ========= /lib/libc.so.6[0x903f18] /lib/libc.so.6(__libc_free+0x79)[0x90741d] /usr/lib/libglib-2.0.so.0(g_free+0x31)[0x7144d1] gconf-editor[0x80542a4] /usr/lib/libgobject-2.0.so.0(g_closure_invoke+0x11d)[0x2a7f6d] /usr/lib/libgobject-2.0.so.0[0x2b8a3d] /usr/lib/libgobject-2.0.so.0(g_signal_emit_valist+0x8c7)[0x2b9f47] /usr/lib/libgobject-2.0.so.0(g_signal_emit+0x29)[0x2ba109] gconf-editor[0x8050a4e] /usr/lib/libgtk-x11-2.0.so.0(gtk_cell_renderer_activate+0xb0)[0xeff500] /usr/lib/libgtk-x11-2.0.so.0[0x109fa2b] /usr/lib/libgtk-x11-2.0.so.0[0x109fcef] /usr/lib/libgtk-x11-2.0.so.0[0x109c2fa] /usr/lib/libgtk-x11-2.0.so.0[0xfc34de] /usr/lib/libgobject-2.0.so.0[0x2a67a9] /usr/lib/libgobject-2.0.so.0(g_closure_invoke+0x11d)[0x2a7f6d] /usr/lib/libgobject-2.0.so.0[0x2b9083] /usr/lib/libgobject-2.0.so.0(g_signal_emit_valist+0x68f)[0x2b9d0f] /usr/lib/libgobject-2.0.so.0(g_signal_emit+0x29)[0x2ba109] /usr/lib/libgtk-x11-2.0.so.0[0x10ae028] /usr/lib/libgtk-x11-2.0.so.0(gtk_propagate_event+0x183)[0xfbcec3] /usr/lib/libgtk-x11-2.0.so.0(gtk_main_do_event+0x317)[0xfbe117] /usr/lib/libgdk-x11-2.0.so.0[0x42093a] /usr/lib/libglib-2.0.so.0(g_main_context_dispatch+0x16d)[0x70d09d] /usr/lib/libglib-2.0.so.0[0x71032f] /usr/lib/libglib-2.0.so.0(g_main_loop_run+0x1a9)[0x7106d9] /usr/lib/libgtk-x11-2.0.so.0(gtk_main+0xb4)[0xfbe594] gconf-editor[0x805d8fc] /lib/libc.so.6(__libc_start_main+0xdc)[0x8b57e4] gconf-editor[0x804f531] ======= Memory map: ======== 00111000-00119000 r-xp 00000000 03:03 758291 /usr/lib/libpangocairo-1.0.so.0.1200.0 00119000-0011a000 rwxp 00007000 03:03 758291 /usr/lib/libpangocairo-1.0.so.0.1200.0 0011a000-0011c000 r-xp 00000000 03:03 847007 /lib/libdl-2.4.so 0011c000-0011d000 r-xp 00001000 03:03 847007 /lib/libdl-2.4.so 0011d000-0011e000 rwxp 00002000 03:03 847007 /lib/libdl-2.4.so 0011e000-00128000 r-xp 00000000 03:03 758656 /usr/lib/libesd.so.0.2.36 00128000-00129000 rwxp 00009000 03:03 758656 /usr/lib/libesd.so.0.2.36 00129000-00135000 r-xp 00000000 03:03 758453 /usr/lib/libgnome-keyring.so.0.0.1 00135000-00136000 rwxp 0000b000 03:03 758453 /usr/lib/libgnome-keyring.so.0.0.1 00136000-0015d000 r-xp 00000000 03:03 758293 /usr/lib/libpangoft2-1.0.so.0.1200.0 0015d000-0015e000 rwxp 00027000 03:03 758293 /usr/lib/libpangoft2-1.0.so.0.1200.0 0015e000-0019a000 r-xp 00000000 03:03 758289 /usr/lib/libpango-1.0.so.0.1200.0 0019a000-0019c000 rwxp 0003b000 03:03 758289 /usr/lib/libpango-1.0.so.0.1200.0 0019c000-00200000 r-xp 00000000 03:03 762619 /usr/lib/libgnomevfs-2.so.0.1400.0 00200000-00205000 rwxp 00064000 03:03 762619 /usr/lib/libgnomevfs-2.so.0.1400.0 00205000-0025f000 r-xp 00000000 03:03 754353 /usr/lib/libbonobo-2.so.0.0.0 0025f000-00269000 rwxp 0005a000 03:03 754353 /usr/lib/libbonobo-2.so.0.0.0 00269000-0029c000 r-xp 00000000 03:03 758846 /usr/lib/libgconf-2.so.4.1.0 0029c000-0029f000 rwxp 00033000 03:03 758846 /usr/lib/libgconf-2.so.4.1.0 0029f000-002dd000 r-xp 00000000 03:03 752640 /usr/lib/libgobject-2.0.so.0.1000.1 002dd000-002de000 rwxp 0003e000 03:03 752640 /usr/lib/libgobject-2.0.so.0.1000.1 002de000-002f1000 r-xp 00000000 03:03 754355 /usr/lib/libbonobo-activation.so.4.0.0 002f1000-002f3000 rwxp 00013000 03:03 754355 /usr/lib/libbonobo-activation.so.4.0.0 002f3000-00341000 r-xp 00000000 03:03 753607 /usr/lib/libORBit-2.so.0.1.0 00341000-0034a000 rwxp 0004e000 03:03 753607 /usr/lib/libORBit-2.so.0.1.0 0034a000-0034b000 rwxp 0034a000 00:00 0 0034b000-0035a000 r-xp 00000000 03:03 752967 /usr/lib/libXext.so.6.4.0 0035a000-0035b000 rwxp 0000e000 03:03 752967 /usr/lib/libXext.so.6.4.0 0035d000-0036f000 r-xp 00000000 03:03 752634 /usr/lib/libz.so.1.2.3 0036f000-00370000 rwxp 00011000 03:03 752634 /usr/lib/libz.so.1.2.3 00370000-00391000 r-xp 00000000 03:03 752886 /usr/lib/libjpeg.so.62.0.0 00391000-00392000 rwxp 00020000 03:03 752886 Beside that I think that new Fedora is a great distribution. Great work. Thanks! Greetings, Marcin

2 1

unable to run file.bin ?????????????
by LarryT 26 Mar '06

26 Mar '06

Hi, I dont really know if this is a problem to this list or not ? Please tell me ! Here is the problem : I would like to install a module from GMGE UPS to shutdown my pc when ups is on battery. Here is what i did : > [root@Fopadix-fc5 Desktop]# sh nsmlinuxv2_6_00.bin > > > Network Shutdown Module - Installer for Unix > -------------------------------------------- > Copyright � 2006 MGE UPS SYSTEMS > http://www.mgeups.com > -------------------------------------------- > Extracting archive... please wait. > tail: cannot open `+87' for reading: No such file or directory > > gzip: stdin: not in gzip format > Done. > nsmlinuxv2_6_00.bin: line 78: nsm*/install.sh: No such file or directory > [root@Fopadix-fc5 Desktop]# Does the problem come from FC5 or from the bin ? Thx :) -- Larry "Computers are like air conditioners - They stop working properly when you open Windows !"

3 6

AIGLX on FC5
by Paul F. Johnson 26 Mar '06

26 Mar '06

Hi, Dunno if this is just a bug or something, but I've noticed two very annoying problems with AIGLX (I'm using a Toshiba A10 laptop, i810 driver (i852 chipset)). 1. It is dog slow with OpenOffice and I mean dog slow! 2. Drag and drop is dead. It just doesn't work. Does anyone know if these need putting into BZ and if they do, what it needs to be filed under? TTFN Paul -- "ein zu starker starker Anblick kann Sie toten. Sie gegen gerade uber den Rand mit dem festen Wissen des Wege vor Ihnen" - Linus Tordvals

5 6

Very strange yum behaviour
by Paul F. Johnson 26 Mar '06

26 Mar '06

Hi, If I use something like yumex or pup to grab the updates, the new updates which come through from the 8am update list (9am British Summer Time). If I use yum from the command line, there is usually upto a 12 hour delay before they show up. Is there any reason for this? TTFN Paul -- "ein zu starker starker Anblick kann Sie toten. Sie gegen gerade uber den Rand mit dem festen Wissen des Wege vor Ihnen" - Linus Tordvals

2 1

kernel-devel packaging error?
by Jim Bevier 26 Mar '06

26 Mar '06

I installed the FC5 system on an Athlon i686 dual processor system and things seem to be fine. I installed kernel-devel (2054) to try a vmware installation. When kermel-devel installs, it has /lib/modules/2.6.15-1.2054-FC5smp/build pointing to ../../../usr/src/kernels/2.6.15-1.2054_FC5-smp-i686, but /usr/src/kernels contains 2.6.15-1.2054_FC5-i686 instead of 2.6.15-1.2054_FC5-smp-i686. Vmware-config.pl barfs, saying the includes for the installed kernel can not be found. I do not see this error on an x86_64 system. Only on an x86 smp system. What are the correct links? Any idea on what I should do to get vmware configured? Is the kernel-devel rpm just hosed? Jim

2 1

← Newer
1
2
3
4
5
6
7
8
9
...
52
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test March 2006