Dear fellow testers,
After applying the updates(wonder which ones and from which day 20090925->20090928)?, I can no longer connect to the internet with wireless connection on my Acer Aspire 1 netbook. In dmesg, at the very end it mentions something with ipv6, I am attching part of dmesg to see if it can help me here, I am sending this with the same netbook but with wired connection.
EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (dm-0): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/vg_aceraspire1-lv_root dracut: Loading SELinux policy type=1404 audit(1254262710.493:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 138018 rules. SELinux: 8192 avtab hash slots, 138018 rules. SELinux: 8 users, 12 roles, 2864 types, 129 bools, 1 sens, 1024 cats SELinux: 75 classes, 138018 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1254262712.005:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root type=1305 audit(1254262713.812:6): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1 udev: starting version 145 ACPI: WMI: Mapper loaded ATL1E 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ATL1E 0000:03:00.0: setting latency timer to 64 cfg80211: Calling CRDA to update world regulatory domain intel_rng: FWH not detected i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Linux video capture interface: v2.00 cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) acer-wmi: Acer Laptop ACPI-WMI Extras acer-wmi: Unable to detect available WMID devices uvcvideo: Found UVC 1.00 device Webcam (04f2:b084) input: Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input8 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ath5k 0000:01:00.0: setting latency timer to 64 ath5k 0000:01:00.0: registered as 'phy0' ath: EEPROM regdomain: 0x65 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x65 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: setting latency timer to 64 phy0: Selected rate control algorithm 'minstrel' Registered led device: ath5k-phy0::rx Registered led device: ath5k-phy0::tx ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) hda_codec: Unknown model for ALC272, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3866: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3870: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3871: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3882: inputs: mic=0x12, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_realtek.c:1181: realtek: No valid SSID, checking pincfg 0x4016892d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1197: realtek: Enabling init ASM_ID=0x892d CODEC_ID=10ec0272 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 cfg80211: Calling CRDA for country: US cfg80211: Regulatory domain changed to country: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) device-mapper: multipath: version 1.1.0 loaded EXT4-fs (dm-0): internal journal on dm-0:8 kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda3, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/mapper/vg_aceraspire1-lv_swap. Priority:-1 extents:1 across:2031608k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212 platform microcode: firmware: requesting intel-ucode/06-1c-02 microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212 platform microcode: firmware: requesting intel-ucode/06-1c-02 Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba Microcode Update Driver: v2.00 removed. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ADDRCONF(NETDEV_UP): wlan0: link is not ready ATL1E 0000:03:00.0: irq 28 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 1 0 type=1400 audit(1254262761.504:7): avc: denied { search } for pid=1487 comm="polkitd" name="root" dev=dm-0 ino=277 scontext=system_u:system_r:policykit_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:user_home_dir_t:s0 tclass=dir fuse init (API version 7.12) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts wlan0: authenticate with AP 00:1c:58:05:e7:a0 wlan0: authenticated wlan0: associate with AP 00:1c:58:05:e7:a0 wlan0: RX AssocResp from 00:1c:58:05:e7:a0 (capab=0x431 status=0 aid=54) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [olivares@acer-aspire-1 ~]$ dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31.1-48.fc12.i686 (mockbuild@x86-7.fedora.phx.redhat.com) (gcc version 4.4.1 20090923 (Red Hat 4.4.1-16) (GCC) ) #1 SMP Fri Sep 25 17:13:30 EDT 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f576000 (usable) BIOS-e820: 000000003f576000 - 000000003f5bf000 (reserved) BIOS-e820: 000000003f5bf000 - 000000003f66e000 (usable) BIOS-e820: 000000003f66e000 - 000000003f6bf000 (ACPI NVS) BIOS-e820: 000000003f6bf000 - 000000003f6ef000 (usable) BIOS-e820: 000000003f6ef000 - 000000003f6ff000 (ACPI data) BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x3f700 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0FFF00000 mask 0FFF00000 write-protect 1 base 0FFFC0000 mask 0FFFE0000 uncachable 2 base 000000000 mask 0E0000000 write-back 3 base 020000000 mask 0E0000000 write-back 4 base 03F800000 mask 0FF800000 uncachable 5 base 03F700000 mask 0FFF00000 uncachable 6 disabled 7 base 000000000 mask 0FFFE0000 uncachable x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 4095MB, range: 1MB, type WP reg 1, base: 4194048KB, range: 128KB, type UC reg 2, base: 0GB, range: 512MB, type WB reg 3, base: 512MB, range: 512MB, type WB reg 4, base: 1016MB, range: 8MB, type UC reg 5, base: 1015MB, range: 1MB, type UC reg 7, base: 0GB, range: 128KB, type UC WARNING: BIOS bug: VAR MTRR 7 contains strange UC entry under 1M, check with your system vendor! total RAM coverred: 1015M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 1GB, type WB reg 1, base: 1015MB, range: 1MB, type UC reg 2, base: 1016MB, range: 8MB, type UC x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-00000000373fe000 Using x86 segment limits to approximate NX protection 0000000000 - 0000400000 page 4k 0000400000 - 0037000000 page 2M 0037000000 - 00373fe000 page 4k kernel direct mapping tables up to 373fe000 @ 7000-d000 RAMDISK: 3753b000 - 37fef0d5 Allocated new RAMDISK: 012bd000 - 01d710d5 Move RAMDISK from 000000003753b000 - 0000000037fef0d4 to 012bd000 - 01d710d4 ACPI: RSDP 000fe020 00024 (v02 ACRSYS) ACPI: XSDT 3f6fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013) ACPI: FACP 3f6fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: DSDT 3f6f1000 06E2E (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: FACS 3f688000 00040 ACPI: SSDT 3f6fd000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) ACPI: HPET 3f6fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: APIC 3f6fa000 00068 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: MCFG 3f6f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: ASF! 3f6f8000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: SLIC 3f6f0000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: BOOT 3f6ef000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) ACPI: Local APIC address 0xfee00000 131MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 0 - 373fe000 node 0 low ram: 00000000 - 373fe000 node 0 bootmap 0000a000 - 00010e80 (9 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 00012b55cc] TEXT DATA BSS ==> [0000400000 - 00012b55cc] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [00012b6000 - 00012bc148] BRK ==> [00012b6000 - 00012bc148] #6 [0000007000 - 000000a000] PGTABLE ==> [0000007000 - 000000a000] #7 [00012bd000 - 0001d710d5] NEW RAMDISK ==> [00012bd000 - 0001d710d5] #8 [000000a000 - 0000011000] BOOTMAP ==> [000000a000 - 0000011000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x0003f700 Movable zone start PFN for each node early_node_map[5] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003f576 0: 0x0003f5bf -> 0x0003f66e 0: 0x0003f6bf -> 0x0003f6ef 0: 0x0003f6ff -> 0x0003f700 On node 0 totalpages: 259573 free_area_init_node: node 0, pgdat c0a6a6a0, node_mem_map c1d72000 DMA zone: 60 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3939 pages, LIFO batch:0 Normal zone: 3255 pages used for memmap Normal zone: 218951 pages, LIFO batch:31 HighMem zone: 492 pages used for memmap HighMem zone: 32876 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 334 pages at c2c63000, static data 1345756 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255766 Kernel command line: ro root=/dev/mapper/vg_aceraspire1-lv_root SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us rd_plytheme=charge PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 allocated 5196800 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing HighMem for node 0 (000373fe:0003f700) Memory: 988044k/1039360k available (4272k kernel code, 49932k reserved, 2364k data, 1768k init, 133472k highmem) virtual kernel memory layout: fixmap : 0xffad5000 - 0xfffff000 (5288 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc0a7b000 - 0xc0c35000 (1768 kB) .data : 0xc082c000 - 0xc0a7b000 (2364 kB) .text : 0xc0400000 - 0xc082c000 (4272 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:1280 Fast TSC calibration using PIT Detected 1662.304 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 3743 kB per task-struct memory footprint: 1920 bytes ODEBUG: 10 of 10 active objects replaced hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.60 BogoMIPS (lpj=1662304) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 24K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Counters: Atom events, Intel PMU driver. ... version: 3 ... bit width: 40 ... generic counters: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 3 ... counter mask: 0000000700000003 Checking 'hlt' instruction... OK. ACPI: Core revision 20090521 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20387 entries in 40 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02 lockdep: fixing up alternatives. Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3324.82 BogoMIPS (lpj=1662414) CPU: L1 I cache: 32K, L1 D cache: 24K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (6649.43 BogoMIPS). sizeof(vma)=84 bytes sizeof(page)=60 bytes sizeof(inode)=652 bytes sizeof(dentry)=164 bytes sizeof(ext3inode)=912 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=192 bytes sizeof(task_struct)=5512 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 1 0 Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 22:18:20 Date: 09/29/09 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [FN00] (on) ACPI: No dock devices found. ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0x56280000-0x562fffff] pci 0000:00:02.0: reg 14 io port: [0x50f0-0x50f7] pci 0000:00:02.0: reg 18 32bit mmio: [0x40000000-0x4fffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0x56300000-0x5633ffff] pci 0000:00:02.1: reg 10 32bit mmio: [0x56200000-0x5627ffff] pci 0000:00:1b.0: reg 10 64bit mmio: [0x56340000-0x56343fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf] pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f] pci 0000:00:1d.2: reg 20 io port: [0x5060-0x507f] pci 0000:00:1d.3: reg 20 io port: [0x5040-0x505f] pci 0000:00:1d.7: reg 10 32bit mmio: [0x56344400-0x563447ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x50c0-0x50cf] pci 0000:00:1f.2: reg 10 io port: [0x50d8-0x50df] pci 0000:00:1f.2: reg 14 io port: [0x50fc-0x50ff] pci 0000:00:1f.2: reg 18 io port: [0x50d0-0x50d7] pci 0000:00:1f.2: reg 1c io port: [0x50f8-0x50fb] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x502f] pci 0000:00:1f.2: reg 24 32bit mmio: [0x56344000-0x563443ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f] pci 0000:01:00.0: reg 10 64bit mmio: [0x55100000-0x5510ffff] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.0: bridge 32bit mmio: [0x55100000-0x561fffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x50000000-0x50ffffff] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.1: bridge 32bit mmio: [0x54100000-0x550fffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x51000000-0x51ffffff] pci 0000:03:00.0: reg 10 64bit mmio: [0x53000000-0x5303ffff] pci 0000:03:00.0: reg 18 io port: [0x1000-0x107f] pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.2: bridge io port: [0x1000-0x2fff] pci 0000:00:1c.2: bridge 32bit mmio: [0x53000000-0x540fffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x52000000-0x52ffffff] pci 0000:00:1e.0: transparent bridge pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.EXP3._PRT] ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.2 BAR 13 (0x1000-0x2fff), disabling pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x200-0x20f has been reserved system 00:01: ioport range 0x600-0x60f has been reserved system 00:01: ioport range 0x610-0x610 has been reserved system 00:01: ioport range 0x800-0x80f has been reserved system 00:01: ioport range 0x400-0x47f has been reserved system 00:01: ioport range 0x500-0x53f has been reserved system 00:01: ioport range 0xff2c-0xff2f has been reserved system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: 0x4000-0x4fff pci 0000:00:1c.0: MEM window: 0x55100000-0x561fffff pci 0000:00:1c.0: PREFETCH window: 0x00000050000000-0x00000050ffffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0x54100000-0x550fffff pci 0000:00:1c.1: PREFETCH window: 0x00000051000000-0x00000051ffffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.2: IO window: 0x1000-0x2fff pci 0000:00:1c.2: MEM window: 0x53000000-0x540fffff pci 0000:00:1c.2: PREFETCH window: 0x00000052000000-0x00000052ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: enabling device (0000 -> 0003) pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] pci_bus 0000:01: resource 1 mem: [0x55100000-0x561fffff] pci_bus 0000:01: resource 2 pref mem [0x50000000-0x50ffffff] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] pci_bus 0000:02: resource 1 mem: [0x54100000-0x550fffff] pci_bus 0000:02: resource 2 pref mem [0x51000000-0x51ffffff] pci_bus 0000:03: resource 0 io: [0x1000-0x2fff] pci_bus 0000:03: resource 1 mem: [0x53000000-0x540fffff] pci_bus 0000:03: resource 2 pref mem [0x52000000-0x52ffffff] pci_bus 0000:04: resource 3 io: [0x00-0xffff] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2621440 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 10960k freed Simple Boot Flag value 0x5 read from CMOS RAM was invalid Simple Boot Flag at 0x44 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1254262702.075:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1691 SELinux: Registering netfilter hooks cryptomgr_test used greatest stack depth: 6920 bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS ACPI Error (dsfield-0140): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f6c44080), AE_ALREADY_EXISTS pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 decode_hpp: Could not get hotplug parameters. Use defaults acpiphp: Slot [1] registered acpiphp_glue: sibling found, but _SUN doesn't match! acpiphp_glue: sibling found, but _SUN doesn't match! acpiphp_glue: sibling found, but _SUN doesn't match! ACPI: AC Adapter [AC] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 ACPI: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 ACPI: Sleep Button [SLPB] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (on) ACPI: SSDT 3f592c90 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 3f591e10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2]) processor LNXCPU:00: registered as cooling_device1 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 3f592f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) ACPI: SSDT 3f590f10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) ACPI: CPU1 (power states: C1[C1] C2[C2]) processor LNXCPU:01: registered as cooling_device2 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (27 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found ACPI: Battery Slot [BAT0] (battery present) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GME Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input4 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ahci 0000:00:1f.2: irq 27 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0x56344000 port 0x56344100 irq 27 ata2: DUMMY ata3: SATA max UDMA/133 abar m1024@0x56344000 port 0x56344200 irq 27 ata4: DUMMY ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ata6: port disabled. ignoring. ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 16, io mem 0x56344400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31.1-48.fc12.i686 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31.1-48.fc12.i686 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31.1-48.fc12.i686 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31.1-48.fc12.i686 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31.1-48.fc12.i686 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16240 buckets, 64960 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Magic number: 9:803:351 rtc_cmos 00:03: setting system clock to 2009-09-29 22:18:24 UTC (1254262704) Initalizing network drop monitor service ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-8: Hitachi HTS543216L9SA00, FB2OC40C, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA usb 1-2: new high speed USB device using ehci_hcd and address 2 sda: sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk usb 1-2: New USB device found, idVendor=04f2, idProduct=b084 usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=0 usb 1-2: Product: Webcam usb 1-2: Manufacturer: Chicony Electronics Co., Ltd. usb 1-2: configuration #1 chosen from 1 choice ata3: SATA link down (SStatus 0 SControl 300) Freeing unused kernel memory: 1768k freed NX-protecting the kernel data: c082c000, 2858 pages Write protecting the kernel text: 4272k Write protecting the kernel read-only data: 1776k mknod used greatest stack depth: 6816 bytes left mount used greatest stack depth: 6536 bytes left mknod used greatest stack depth: 6504 bytes left dracut: dracut-002-8.git845dd502.fc12 udev: starting version 145 Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 udevadm used greatest stack depth: 6328 bytes left async/0 used greatest stack depth: 5916 bytes left acpi device:1a: registered as cooling_device3 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:16/input/input7 ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no) [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 fbcon: inteldrmfb (fb0) is primary device [drm] LVDS-8: set mode 1024x600 e Console: switching to colour frame buffer device 128x37 fb0: inteldrmfb frame buffer device registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 modprobe used greatest stack depth: 4848 bytes left dracut: Starting plymouth daemon dracut: Scanning devices sda5 for LVM volume groups dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "vg_aceraspire1" using metadata type lvm2 dracut: 2 logical volume(s) in volume group "vg_aceraspire1" now active EXT4-fs (dm-0): barriers enabled kjournald2 starting: pid 250, dev dm-0:8, commit interval 5 seconds EXT4-fs (dm-0): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (dm-0): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/vg_aceraspire1-lv_root dracut: Loading SELinux policy type=1404 audit(1254262710.493:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 138018 rules. SELinux: 8192 avtab hash slots, 138018 rules. SELinux: 8 users, 12 roles, 2864 types, 129 bools, 1 sens, 1024 cats SELinux: 75 classes, 138018 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1254262712.005:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root type=1305 audit(1254262713.812:6): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1 udev: starting version 145 ACPI: WMI: Mapper loaded ATL1E 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ATL1E 0000:03:00.0: setting latency timer to 64 cfg80211: Calling CRDA to update world regulatory domain intel_rng: FWH not detected i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Linux video capture interface: v2.00 cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) acer-wmi: Acer Laptop ACPI-WMI Extras acer-wmi: Unable to detect available WMID devices uvcvideo: Found UVC 1.00 device Webcam (04f2:b084) input: Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input8 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ath5k 0000:01:00.0: setting latency timer to 64 ath5k 0000:01:00.0: registered as 'phy0' ath: EEPROM regdomain: 0x65 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x65 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: setting latency timer to 64 phy0: Selected rate control algorithm 'minstrel' Registered led device: ath5k-phy0::rx Registered led device: ath5k-phy0::tx ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) hda_codec: Unknown model for ALC272, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3866: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3870: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3871: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3882: inputs: mic=0x12, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_realtek.c:1181: realtek: No valid SSID, checking pincfg 0x4016892d for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1197: realtek: Enabling init ASM_ID=0x892d CODEC_ID=10ec0272 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 cfg80211: Calling CRDA for country: US cfg80211: Regulatory domain changed to country: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) device-mapper: multipath: version 1.1.0 loaded EXT4-fs (dm-0): internal journal on dm-0:8 kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda3, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/mapper/vg_aceraspire1-lv_swap. Priority:-1 extents:1 across:2031608k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212 platform microcode: firmware: requesting intel-ucode/06-1c-02 microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212 platform microcode: firmware: requesting intel-ucode/06-1c-02 Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba Microcode Update Driver: v2.00 removed. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ADDRCONF(NETDEV_UP): wlan0: link is not ready ATL1E 0000:03:00.0: irq 28 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level SIBLING groups: 1 0 type=1400 audit(1254262761.504:7): avc: denied { search } for pid=1487 comm="polkitd" name="root" dev=dm-0 ino=277 scontext=system_u:system_r:policykit_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:user_home_dir_t:s0 tclass=dir fuse init (API version 7.12) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts wlan0: authenticate with AP 00:1c:58:05:e7:a0 wlan0: authenticated wlan0: associate with AP 00:1c:58:05:e7:a0 wlan0: RX AssocResp from 00:1c:58:05:e7:a0 (capab=0x431 status=0 aid=54) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present wlan0: disassociating by local choice (reason=3) wlan0: deauthenticated (Reason: 2) wlan0: direct probe to AP 00:1c:58:05:e8:90 try 1 [olivares@acer-aspire-1 ~]$
Regards,
Antonio
On Tue, 2009-09-29 at 15:34 -0700, Antonio Olivares wrote:
Dear fellow testers,
After applying the updates(wonder which ones and from which day 20090925->20090928)?, I can no longer connect to the internet with wireless connection on my Acer Aspire 1 netbook. In dmesg, at the very end it mentions something with ipv6, I am attching part of dmesg to see if it can help me here, I am sending this with the same netbook but with wired connection.
The ipv6 message isn't the problem, that's a normal message. The below line is:
wlan0: disassociating by local choice (reason=3)
But I can't tell you why that's happening...
-
Adam Williamson -
Antonio Olivares