I went to test a fresh install of rawhide/development and anaconda quit with an X-windows related failure. I couldn't get a decent trace. With no real information, I'm reluctant to bugzilla it, but wanted to mention it somewhere.
AMD K6-2 @400MHz 320MBram ATI Mach64 video other standard peripherals
Gregory Woodbury wrote:
I went to test a fresh install of rawhide/development and anaconda quit with an X-windows related failure. I couldn't get a decent trace. With no real information, I'm reluctant to bugzilla it, but wanted to mention it somewhere.
AMD K6-2 @400MHz 320MBram ATI Mach64 video other standard peripherals
If you got as far as the filesystem being created, you might find some decent files with failure information under root. You might go into rescue mode and mount and check the /root directory.
I have a system with an ATI Mach64 video card and was wanting to try a rawhide installation. If I have success or failure, I'll see what I can find. I can install with either an 815 or the ATI as primary video.
Jim
Gregory Woodbury wrote:
I went to test a fresh install of rawhide/development and anaconda quit with an X-windows related failure. I couldn't get a decent trace. With no real information, I'm reluctant to bugzilla it, but wanted to mention it somewhere.
AMD K6-2 @400MHz 320MBram ATI Mach64 video other standard peripherals
I just tried an upgrade install and there wer not the usual logs in the root directory. This is on a machine using lvm. I used to look in the /root directory for an anaconda dump, there was no such file. Does the dump work with an lvm setup?
system: /sbin/lspci 00:00.0 Host bridge: ATI Technologies Inc AGP Bridge [IGP 320M] (rev 13) 00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 320M] (rev 01) 00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02) 00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] 00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller 00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller 00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) 00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU] 00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1
Jim
Gregory Woodbury wrote:
I went to test a fresh install of rawhide/development and anaconda quit with an X-windows related failure. I couldn't get a decent trace. With no real information, I'm reluctant to bugzilla it, but wanted to mention it somewhere.
AMD K6-2 @400MHz 320MBram ATI Mach64 video other standard peripherals
I tried on a system with the ATI card and the installation seems to bail out at the welcome screen. I don't think that the bailout is card specific.
I started a text install and it did not detect the currently installed FC version installed. It did get to where you choose the installation type. I bailed out after it did not detect an existing installation.
Regarding the GUI install problem, I could only think that you might use a digital camera and take shots of screen 1, screen 3 and screen 4. You could do that with the alt-F1, alt-F3 and Alt-F4 keys. Chacking bugzilla might be worth a look to see if anyone ele attempt a jan 23 installation.
Jim