Sean,
Thanks! That definitly did the trick, ACPI is up and running.
Next on the list is to play with performance and cpufreq.
Also, installing the linux-wlan drivers appears to break pcmcia, I get yenta errors after restarting pcmcia after I make install the linux-wlan code. Anyhow, I'm going to review it again, if I still have issues I will post more details.
Louis
Hi Louis,
I had a similar problem with a Toshiba laptop.
It seems that the acpi-related modules are not being loaded.
Edit your /etc/rc.d/init.d/acpid .....
<snip> ..... start() { # Check if it is already running if [ ! -f /var/lock/subsys/$PROGNAME ]; then echo -n $"Starting acpi daemon: " # add apci modules - button only default! modprobe ac > /dev/null 2>&1 modprobe battery > /dev/null 2>&1 modprobe button > /dev/null 2>&1 modprobe fan > /dev/null 2>&1 modprobe processor > /dev/null 2>&1 modprobe thermal > /dev/null 2>&1 daemon /usr/sbin/$PROGNAME RETVAL=$? [ $RETVAL -eq 0 ] && touch /var/lock/subsys/$PROGNAME echo fi return $RETVAL }
<snip>
That fixed me.
Sean Craig
I haven't been following this thread very well, but find it interesting. I recently bought my first wireless network adapter -- the SMC 2835W Cardbus adapter (54 Mbps, 802.11g). After a kernel recompile and then compiling rhe driver code, much configuration and some configuration help from Rick Johnson, I think I'm ready to take the card for a test drive at my local Starbucks.
Bob
fedora-test-list wrote:
Sean,
Thanks! That definitly did the trick, ACPI is up and running.
Next on the list is to play with performance and cpufreq.
Also, installing the linux-wlan drivers appears to break pcmcia, I get yenta errors after restarting pcmcia after I make install the linux-wlan code. Anyhow, I'm going to review it again, if I still have issues I will post more details.
Louis
Hi Louis,
I had a similar problem with a Toshiba laptop.
It seems that the acpi-related modules are not being loaded.
Edit your /etc/rc.d/init.d/acpid .....
<snip> ..... start() { # Check if it is already running if [ ! -f /var/lock/subsys/$PROGNAME ]; then echo -n $"Starting acpi daemon: " # add apci modules - button only default! modprobe ac > /dev/null 2>&1 modprobe battery > /dev/null 2>&1 modprobe button > /dev/null 2>&1 modprobe fan > /dev/null 2>&1 modprobe processor > /dev/null 2>&1 modprobe thermal > /dev/null 2>&1 daemon /usr/sbin/$PROGNAME RETVAL=$? [ $RETVAL -eq 0 ] && touch /var/lock/subsys/$PROGNAME echo fi return $RETVAL }
<snip>
That fixed me.
Sean Craig
-- fedora-test-list mailing list fedora-test-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-test-list