Running the fedora updated anaconda..
It thinks my Nvidia Gf4 is a ATI Mach64, does anyone else have this problem or is my computer just possessed?
If ofcourse fails back to vesa, but it didnt used to do this in RH9?
Tommy
during the install, or after its done?
Tommy
On Oct 1, 2003, at 2:47 PM, Bill Nottingham wrote:
Tommy McNeely (tommy.mcneely@sun.com) said:
Running the fedora updated anaconda..
It thinks my Nvidia Gf4 is a ATI Mach64, does anyone else have this problem or is my computer just possessed?
lspci output?
Bill
-- fedora-test-list mailing list fedora-test-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-test-list
OK, well after getting "operating system not found" .. I decided to install again (and this time heed the warning and include a /boot :)
Its curious.. appearantly my system has a built in (but disabled) ATI Rage XL card that must be whats getting detected... I cannot paste the output yet, but I have saved it in /mnt/sysimage for later use.
I just find it strange that it worked in RH8 and RH9 .. failed in severn1 and fedora-test-2?
Tommy
On Oct 1, 2003, at 3:06 PM, Bill Nottingham wrote:
Tommy McNeely (tommy.mcneely@sun.com) said:
during the install, or after its done?
Either. If it changes depending on the environment, we've got bigger problems. :)
Bill
-- fedora-test-list mailing list fedora-test-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-test-list
FUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUK!
OK after a complete re-install I get the same error.. it was the damned updates.img disk :) I feel really really really stupid now :)
smp kernel doesnt work (known issue) back to the ATI issue :)
[root@cookies export]# diff lspci.install lspci.running 99c99 < Flags: 66Mhz, medium devsel, IRQ 10 ---
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 10
Thats not tooo big of a difference, but it IS on the video card :)
[root@cookies export]# lspci -v 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11) Flags: bus master, medium devsel, latency 64 Memory at 80000000 (32-bit, prefetchable) [size=1024M] Memory at 5000a000 (32-bit, prefetchable) [size=4K] I/O ports at 2030 [disabled] [size=4] Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 99 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 Memory behind bridge: 52000000-52ffffff Prefetchable memory behind bridge: c0000000-c80fffff
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] ISA (rev 02) Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] IDE (rev 01) (prog-if 8a [Master SecP PriP]) Flags: medium devsel I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] ACPI (rev 01) Flags: medium devsel
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] USB (rev 07) (prog-if 10 [OHCI]) Flags: bus master, medium devsel, latency 16, IRQ 11 Memory at 000dc000 (32-bit, non-prefetchable) [size=4K]
00:09.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01) Subsystem: Adaptec AHA-2940UW SCSI Host Adapter Flags: bus master, medium devsel, latency 64, IRQ 10 I/O ports at 1000 [disabled] [size=256] Memory at 50005000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [dc] Power Management version 1
00:0b.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03) Subsystem: Creative Labs SB0090 Audigy Player Flags: bus master, medium devsel, latency 64, IRQ 11 I/O ports at 2000 [size=32] Capabilities: [dc] Power Management version 2
00:0b.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03) Subsystem: Creative Labs SB Audigy MIDI/Game Port Flags: bus master, medium devsel, latency 64 I/O ports at 2038 [size=8] Capabilities: [dc] Power Management version 2
00:0b.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (prog-if 10 [OHCI]) Subsystem: Creative Labs SB Audigy FireWire Port Flags: bus master, medium devsel, latency 64, IRQ 5 Memory at 50008000 (32-bit, non-prefetchable) [size=2K] Memory at 50000000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2
00:0d.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) Subsystem: Tyan Computer Thunder K7 S2462 Flags: bus master, 66Mhz, medium devsel, latency 72, IRQ 5 BIST result: 00 I/O ports at 1400 [disabled] [size=256] Memory at 50006000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2
00:0d.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) Subsystem: Tyan Computer Thunder K7 S2462 Flags: bus master, 66Mhz, medium devsel, latency 72, IRQ 10 BIST result: 00 I/O ports at 1800 [disabled] [size=256] Memory at 50007000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA]) Flags: stepping, medium devsel Memory at 51000000 (32-bit, non-prefetchable) [disabled] [size=16M] I/O ports at 2400 [disabled] [size=256] Memory at 50009000 (32-bit, non-prefetchable) [disabled] [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [5c] Power Management version 2
00:0f.0 Ethernet controller: 3Com Corporation 3c980-TX 10/100baseTX NIC [Python-T] (rev 78) Subsystem: Tyan Computer Thunder K7 S2462 Flags: bus master, medium devsel, latency 80, IRQ 3 I/O ports at 1c00 [size=128] Memory at 50008800 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2
00:10.0 Ethernet controller: 3Com Corporation 3c980-TX 10/100baseTX NIC [Python-T] (rev 78) Subsystem: Tyan Computer Thunder K7 S2462 Flags: bus master, medium devsel, latency 80, IRQ 11 I/O ports at 1c80 [size=128] Memory at 50008c00 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2
01:05.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti 4600] (rev a3) (prog-if 00 [VGA]) Subsystem: VISIONTEK: Unknown device 0037 Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 10 Memory at 52000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (32-bit, prefetchable) [size=128M] Memory at c8000000 (32-bit, prefetchable) [size=512K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [44] AGP version 2.0
On Oct 1, 2003, at 5:32 PM, Tommy McNeely wrote:
OK, well after getting "operating system not found" .. I decided to install again (and this time heed the warning and include a /boot :)
Its curious.. appearantly my system has a built in (but disabled) ATI Rage XL card that must be whats getting detected... I cannot paste the output yet, but I have saved it in /mnt/sysimage for later use.
I just find it strange that it worked in RH8 and RH9 .. failed in severn1 and fedora-test-2?
Tommy
On Oct 1, 2003, at 3:06 PM, Bill Nottingham wrote:
Tommy McNeely (tommy.mcneely@sun.com) said:
during the install, or after its done?
Either. If it changes depending on the environment, we've got bigger problems. :)
Bill
-- fedora-test-list mailing list fedora-test-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-test-list
-- fedora-test-list mailing list fedora-test-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-test-list
Tommy McNeely (tommy.mcneely@sun.com) said:
Its curious.. appearantly my system has a built in (but disabled) ATI Rage XL card that must be whats getting detected... I cannot paste the output yet, but I have saved it in /mnt/sysimage for later use.
OK, I know where that's coming from. Please file a bug so I remember to fix it. :)
Bill
On Wed, 01 Oct 2003 21:45:44 -0400, Bill Nottingham wrote:
Tommy McNeely (tommy.mcneely@sun.com) said:
[quoted text muted]
OK, I know where that's coming from. Please file a bug so I remember to fix it. :)
Bill
I have posted the bug, although you may need to re-cat it, as I was not sure whether to put it in as an X config problem or anaconda problem :)
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=106030
Tommy
PS: does anyone else get "REQUEST URI TOO LONG" when the commit from the bug generation tool... I always have to copy out my "additional info" section.. hit commit.. then put it back in on the new window... perhaps that should be changed from GET to POST?