I am trying the FC6t1 installer for network install (diskboot.iso or rescuecd.iso, or today's rescuecd.iso {80610 KB 06/30/2006 08:33:00 AM}), I do lang-eng,keyb=us,method=ftp (or nfs/http), I get No driver found: Select Driver. The PCCard (ethernet,wired) module will load according to VT3, but I then get asked again to select driver.
The two cards are: {notebook is hp omnibook 4150, pentiumII} - Xircom Creditcard ethernet+modem 33.6 CEM33 {xirc2ps_cs driver previously} - SMC etherez 8020BT/T {
I haven't used either of these two pccard ethernet adaptors before when trying to install FC5 or 4 (but both operate with FC5), so I do not know whether: - a kernel module load problem discussed a few days ago might still be causing issues. {wait a bit!} - it should work but requires module arguments {offered in selection} - it should just work -> file a bug
Some info from VT's: 3: : modules to insert pcmcia_core yenta_socket pcmcia : load module set done : modules to insert yenta_socket : load module set done 4: <6>cs: IO port probe 0x100-0x3af: excluding 0x120-0x127 0x220-0x22f 0x378-0x37f 0x388-0x38f <6>cs: warning: no high memory space available! <6>cs: IO port probe {identical to previous}
Then select the driver: 3: : modules to insert xirc2ps_cs : loaded xirc2ps_cs from /modules.modules.cgz : inserted /tmp/xirc2ps_cs.ko : load module set done
But then back to driver select screen. VT2 is not yet a usable command prompt.
DaveT.
-
David Timms