Updated Packages:
audit-0.9.10-1 -------------- * Sun Jun 19 2005 Steve Grubb sgrubb@redhat.com 0.9.10-1 - Make sure the bad packet is drained when retrying user messages - Add support for new user and watch filter lists - Interpret flags field in ausearch
cairo-0.5.1-1 ------------- * Mon Jun 20 2005 Kristian Høgsberg krh@redhat.com 0.5.1-1 - Update to cairo 0.5.1. - Remove gtk-doc files, since --disable-gtk-doc doesn't work. - Disable gtk-doc and add freetype and fontconfig BuildRequires.
glibc-2.3.5-11 -------------- * Mon Jun 20 2005 Jakub Jelinek jakub@redhat.com 2.3.5-11 - update from CVS - PPC32 -msecure-plt support - support classes keyword in /etc/hesiod.conf (#150350) - add RLIMIT_NICE and RLIMIT_RTPRIO to <sys/resources.h> (#157049) - decrease number of .plt relocations in libc.so - use -laudit in nscd (#159217) - handle big amounts of networking interfaces in getifaddrs/if_nameindex (#159399) - fix pa_IN locale's am_pm (#158715, BZ#622) - fix debugging of PIEs
* Mon May 30 2005 Jakub Jelinek jakub@redhat.com 2.3.5-10 - fix LD_ASSUME_KERNEL (since 2.3.5-8 GLRO(dl_osversion) has been always overwritten with the version of currently running kernel) - remove linuxthreads man pages other than those covered in 3p section, as 3p man pages are far better quality and describe POSIX behaviour that NPTL implements (#159084)
* Tue May 24 2005 Jakub Jelinek jakub@redhat.com 2.3.5-9 - update from CVS - increase bindresvport's LOWPORT to 512, apparently some broken daemons don't think 0 .. 511 ports are reserved
iiimf-1:12.2-6 -------------- * Tue Jun 21 2005 Akira TAGOH tagoh@redhat.com - 1:12.2-6 - iiimd-init.d: fixed that service iiim stop didn't work properly.
* Thu Jun 16 2005 Akira TAGOH tagoh@redhat.com - gimlet-default-icon-r2665-159121.patch: set the default window icon. (#159121)
isdn4k-utils-3.2-29 ------------------- * Mon Jun 20 2005 Than Ngo than@redhat.com 3.2-29 - workaround for loading isdn module at system startup #160831
kernel-2.6.12-1.1387_FC5 ------------------------ * Mon Jun 20 2005 Dave Jones davej@redhat.com - 2.6.12-git2 - temporarily disable Tux as the rebase broke it.
poppler-0.3.3-1 --------------- * Mon Jun 20 2005 Kristian Høgsberg krh@redhat.com - 0.3.3-1 - Update to 0.3.3 and change to build cairo backend.
squirrelmail-1.4.5-0.rc1 ------------------------ * Mon Jun 20 2005 Warren Togami wtogami@redhat.com 1.4.5-0.rc1 - 1.4.5-0.rc1
On Tue, 2005-06-21 at 07:02 -0400, Build System wrote:
cairo-0.5.1-1
- Mon Jun 20 2005 Kristian Høgsberg krh@redhat.com 0.5.1-1
- Update to cairo 0.5.1.
- Remove gtk-doc files, since --disable-gtk-doc doesn't work.
- Disable gtk-doc and add freetype and fontconfig BuildRequires.
I'm curious to know what cairo means in terms of performance for users.
I've read some really good stuff about it, but it all seems to rely on "taking advantage of display hardware acceleration when available (eg. through the X Render Extension or OpenGL)" (to quote from the cairographics.org web site).
What does this mean for users without hardware acceleration? What does this mean for users with NVIDIA and ATI cards who don't have support for 3D rendering because current open source drivers aren't offering support for this?
Given that gtp+-2.7.x (and beyond) is going to rely on Cairo for rendering, I'd really appreciate it if someone in the know could give a heads up on what this means for all users (since most of the focus (media wise) seems to look at hardware accelerated environments).
Any comments?
Rodd
On Tue, 2005-06-21 at 07:02 -0400, Build System wrote:
Updated Packages:
audit-0.9.10-1
- Sun Jun 19 2005 Steve Grubb sgrubb@redhat.com 0.9.10-1
- Make sure the bad packet is drained when retrying user messages
- Add support for new user and watch filter lists
- Interpret flags field in ausearch
cairo-0.5.1-1
- Mon Jun 20 2005 Kristian Høgsberg krh@redhat.com 0.5.1-1
- Update to cairo 0.5.1.
- Remove gtk-doc files, since --disable-gtk-doc doesn't work.
- Disable gtk-doc and add freetype and fontconfig BuildRequires.
glibc-2.3.5-11
- Mon Jun 20 2005 Jakub Jelinek jakub@redhat.com 2.3.5-11
- update from CVS
- PPC32 -msecure-plt support
- support classes keyword in /etc/hesiod.conf (#150350)
- add RLIMIT_NICE and RLIMIT_RTPRIO to <sys/resources.h> (#157049)
- decrease number of .plt relocations in libc.so
- use -laudit in nscd (#159217)
- handle big amounts of networking interfaces in getifaddrs/if_nameindex (#159399)
- fix pa_IN locale's am_pm (#158715, BZ#622)
- fix debugging of PIEs
- Mon May 30 2005 Jakub Jelinek jakub@redhat.com 2.3.5-10
- fix LD_ASSUME_KERNEL (since 2.3.5-8 GLRO(dl_osversion) has been always overwritten with the version of currently running kernel)
- remove linuxthreads man pages other than those covered in 3p section, as 3p man pages are far better quality and describe POSIX behaviour that NPTL implements (#159084)
- Tue May 24 2005 Jakub Jelinek jakub@redhat.com 2.3.5-9
- update from CVS
- increase bindresvport's LOWPORT to 512, apparently some broken daemons don't think 0 .. 511 ports are reserved
iiimf-1:12.2-6
- Tue Jun 21 2005 Akira TAGOH tagoh@redhat.com - 1:12.2-6
- iiimd-init.d: fixed that service iiim stop didn't work properly.
- Thu Jun 16 2005 Akira TAGOH tagoh@redhat.com
- gimlet-default-icon-r2665-159121.patch: set the default window icon. (#159121)
isdn4k-utils-3.2-29
- Mon Jun 20 2005 Than Ngo than@redhat.com 3.2-29
- workaround for loading isdn module at system startup #160831
kernel-2.6.12-1.1387_FC5
- Mon Jun 20 2005 Dave Jones davej@redhat.com
- 2.6.12-git2
- temporarily disable Tux as the rebase broke it.
poppler-0.3.3-1
- Mon Jun 20 2005 Kristian Høgsberg krh@redhat.com - 0.3.3-1
- Update to 0.3.3 and change to build cairo backend.
squirrelmail-1.4.5-0.rc1
- Mon Jun 20 2005 Warren Togami wtogami@redhat.com 1.4.5-0.rc1
- 1.4.5-0.rc1
Hey, :)
Following reguar devel path repos with basic desktop+ installed. No problems until recently.
1. Yesterday printing stopped working. error message lpr: error - unable to print file: server-error-service-unavailable
Doesn't matter what program. My printer is a shared samba printer from a Windows box. Has always worked. Re-setup everything about it and still get the error. (It seems like some of the printer definitions are missing?)
Root mail can not be retrieved with client. I use Evolution, also tried mail (sendmail root@localhost root@hostname nothing works.)
I tried Graveman cd burning app as it was said to be GREAT and I didn't have one. It wouldn't use the /tmp or /home/username/tmp dir's. Some access denied error. However it left the data (which were photos) in temp dir's under tmp. Wrote them there in a blink, then errored out.
Any suggestion, recommendations, any thing known that would cause theses things from the build lists rpms?
No printing is a show stopper.
thanks,
SJ