Re: any more updates
by George Hare
> George Hare wrote:
> > Will there any more updates for FC6?
> >
> Many more
> They are constantly coming, check once or twice a week.
>
> Jim
Thanks for anwering my question Jim. I guess the Christmas and New
Years had an effect. I usually look every day and there have been
updates every day for months. When a couple of days went by with no
updates I thought something went wrong with my yum config , but I just
got some updates so all is well, thanks.
George Hare
17 years, 5 months
Need help wth kickstart setup of network devices. ifcfg files being renamed to .bak
by Howard Wilkinson
Can anybody point me to the code that is renaming the ifcfg-<device>
files I am creating in the post install part of kickstart. They end up
as ifcfg<device>.bak and get replaced by DHCP entries. As we run our
servers with bonded interfaces I need to get these device to come up as
slaves to the bond device which has a static address.
I know this happens after the %post section has run and I am fairly sure
it happens after the reboot and once the rc.sysinit hhas run for the
first time. I do not have firstboot installed or any of the
system-config-* packages so I have eliminated them from the path. I am
fairly sure it is not anaconda itself that is doing this, but cannot for
the life of me see where it could be happening.
I am running a slightly extended FC6 install with minimal packages.
17 years, 5 months
good command-line audio player for fc5?
by Peter Horst
Is there a good command-line audio player for fc5? I just want something
simple that I can use via PuTTY to play .oggs and internet radio streams.
I tried a program called 'orpheus', but it stopped working almost
immediately ('cannot open the mixer device: /dev/mixer' and 'The ogg
player program has terminated.').
Thanks much!
17 years, 5 months
Re: difficult rpm problem
by Jack Wallen
joe said...
You have a couple of good suggestions on fixing this; I'm more worried about how it happened. There's no
Did you delete something manually? Did you install or upgrade something
using "nodeps" or "force"?
Good luck, this is a fun thing to resolve ;-)
<Joe
well I never install with nodeps or force. Lately i've only been installing with fedoras package management system. So I have no idea how this happened.
--
fedora-list mailing list
fedora-list(a)redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
--- message truncated ---
17 years, 5 months
foomatic-rip: catastrophic memleak
by Colin Brace
Hi all,
Just now I went to print a pdf document in evince. The print job quit
halfway through, and a program called "foomatic-rip" started grabbing
all my memory; the last top reading was 667 MB resident memory and
1069 MB virtual. Alas, I didn't get to the command line in time enough
to kill it and completely choked my system; I could neither ssh in
from another machine to kill it nor kill X with ctrl-alt-backspace;
my only recourse was a hard-reboot (accompanied by a lot of cursing).
I've seen footmatic-rip sporadically misbehave this way before, both
under FC6, which I am currently running, and FC5; previous occasions
it has been printing from Firefox. I don't see it happen when printing
from Abiword or glabels on the other hand.
Anyone have any idea what is going on? I am printing to a Lexmark Z-51
USB printer.
$ rpm -qf /usr/lib/cups/filter/foomatic-rip
foomatic-3.0.2-39.1.fc6
--
Colin Brace
Amsterdam
17 years, 5 months
Enable printer wierdness ??
by Bill Case
Hi;
This is a little complex to follow. It's taken me two weeks to define
the problem without finding a solution. Basically, my HP
psc_1310_series printer keeps becoming un-enabled and removed as
default. Here is what happens:
I login, check my printer_config settings and my HP psc_1310_series
printer is check marked as enabled. Open a word processing or text
editing program such as Open Office Writer, AbiWord, emacs or gedit and
try and print a test page. The test page is put in the queue but no
printing. I again check my printer_config; my HP psc_1310_series
printer is no longer enabled. If I re-checkmark the enabled box and
'Apply', the printer immediately prints everything in the queue even if
I have cancelled all the outstanding jobs.
Everything continues to print fine in every program until I log out and
in again. The cycle continues with the printer_config being marked as
enabled until I call a new test print job.
I am baffled.
--
Regards Bill
17 years, 5 months
Yum installonlypkgs purging all but previous version of kernel
by Ed
I would like to keep the current and previous 2 kernel releases, in
FC5 the installonlypkgs list did not remove packages in the list and
(ISTR) I removed old ones manually.
In FC6 I have kernel and kernel-devel in the installyonlypkgs list in
yum.conf but after a kernel upgrade I find that all versions older
than the previous have been removed, e.g. today I upgraded to kernel
2869 and now only have kernels 2868 and 2869 on my machine. No package
removal is listed on the yum log
How do I get the previous behaviour?, ideally specifying the number of
versions to keep.
Ed
17 years, 5 months
Determining Which Physical Drive Matches Which Logical Device
by vamythguy
I have a RAID-5 array with four SATA disks in it. Apparently, two are going
bad, so I want to replace them. But, I'm not sure which physical drives to
pull. Given the following:
cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sda[0] sdd[3] sdc[2] sdb[1]
735351936 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU]
Any suggestions?
17 years, 5 months
FIXED IT - Re: Problem with cups printing since upgrading to FC6
by Bill Johnson
This is no longer an issue. Thanks to those who helped. After upgrading my
system to FC6, cups would not print to my lan printer. However, I ran yum
update, and after that, everything worked fine.
problem solved.
Bill
On 12/30/06, Anne Wilson <cannewilson(a)tiscali.co.uk> wrote:
>
> On Saturday 30 December 2006 14:31, Bill Johnson wrote:
> > Thanks Anne. I'll keep watching for Tim to chime in. Do you think this
> > problem is related to the fact I upgraded from FC5 to FC6? I'm
> considering
> > trying a clean install to see if that will fix the problem. Do you
> believe
> > that is advisable?
> >
> I really don't know, Bill. Generally a clean install is less troublesome,
> but
> I suspect that isn't the cause in this case. Certainly the problem I had
> was
> unrelated. It turned out to be an upstream bug that only triggered in
> certain circumstances. That's been fixed now, but there could be other
> similar ones. Tim is the expert. He will tell you if he needs specific
> logs
> and/or tests.
>
> Anne
>
>
> --
> fedora-list mailing list
> fedora-list(a)redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>
>
>
17 years, 5 months
Swap partation for FC6
by Edward S.P. Leong
Dear All,
I'm thinking the size partition of swap for FC6 :
1, WebMail System ( http://horde.org/imp, use MySQL DB Server )
2, Web, DNS, FTP, Mail /etc.
Please give comment, thanks !
PS : Actual Ram is 1GB.
17 years, 5 months
