Network problems on new FC4 box - please help.
by William W. Austin
I had to replace a disk (the one with all of the home directories on
it) on an FC3 box, and so I bought a new drive (particulars
unimportant).
To make a long story short, I decided to put FC4 on this box, and so I
installed the new drive and put the root filesystem on it. I still
have the old FC3 root drive and can boot to either for comparison...
Under FC3, I have no network problems that I can detect; however, under
FC4 there are two distinct (related? no idea) problems which have
eluded me. I have tried looking up both of these in the archives, but
have had no luck (some similar issues, but nothing exactly like either
of these unless I missed them).
Problem 1: network card goes to sleep.
This machine has 2 network cards, both on-board. The 1GB card L(Intel
82540EM) goes to the smartswitch to tolk to the local network, and does
not show any problems.
The other card (nVidia nForce2) is a 100MB card and talks to the DSL
modem. Periodically I cannot connect to the internet at all - or even
ping the DSL modem. This happens irregularly but about 5-10 times/day.
If I reboot back to FC3, the problem does not occur. Network
configurations between the two (FC3/FC4) are as identical as I can make
them. The first few times the problem occurs, sometimes retarting
networking works, but eventually a full sys reboot is the only thing
which works.
Problem 2: slow local network.
Under FC3 throughput on the LOCAL network (1GB lan) is very fast.
Under FC4, the best I have seen is ONE transfer of about 1.2 MB/s - and
throughput drops to as low as 50-75KB/s at times. Again, this does not
occur under FC3 but does under FC4. Again the same setup as nearly as
I can make it. No workaround found so far.
Any suggestions would be greatly appreciated.
--
william w. austin waustin(a)speakeasy.net
"life is just another phase i'm going through. this time, anyway ..."
14 years, 5 months
latest selinux policy update errors
by Mark Haney
Is anyone else seeing these types of failures with the latest selinux
updates?
libsemanage.semanage_direct_remove: Module dpkg was not found.
semodule: Failed on dpkg!
error: %trigger(selinux-policy-strict-2.6.4-21.fc7.noarch) scriptlet
failed, exit status 1
libsemanage.semanage_direct_remove: Module dpkg was not found.
semodule: Failed on dpkg!
error: %trigger(selinux-policy-strict-2.6.4-23.fc7.noarch) scriptlet
failed, exit status 1
Should I file a bug report?
--
Da mihi sis bubulae frustrum assae, solana tuberosa in modo gallico
fricta, ac quassum lactatum coagulatum crassum
Mark Haney
Sr. Systems Administrator
ERC Broadband
(828) 350-2415
Call (866) ERC-7110 for after hours support
14 years, 7 months
Domain of sender address ... does not resolve
by Bill Davidsen
I just did a new FC9 (fully updated) install, and it regularly rejects outgoing
mail with the subject error message. The address does resolve, of course, so I'm
not sure what it means instead of what it says.
The nameservers in /etc/resolv.conf are the authoritative DNS for the domain,
both are up, etc.
Someone have a clue?
--
Bill Davidsen <davidsen(a)tmr.com>
"We have more to fear from the bungling of the incompetent than from
the machinations of the wicked." - from Slashdot
14 years, 9 months
FC10 and freeNX
by Jim
Has anyone installed freeNX Server on FC10, how did it go ? I'am aware
that you have to install xorg-x11-fonts-misc in FC10.
Please no guesses from those who have installed it in FC 7, 8 , it has a
different set of problems in FC10 .
I have installed it in every FC since FC6.
15 years
Unable to login after latest FC10 updates (i386 on Dell GX270)
by Al Dunsmuir
I'm running FC10 on 3 systems - 2x 32-bit (DELL GX260, D810 laptop)
and 1x 64-bit (AMD quad).
After applying all the recent updates, the D810 and AMD box are fine.
Unfortunately, on the GX260 I can no longer log on - the Gnome logon
panel appears to have all buttons in the bottom row and my user ID
button displayed (low intensity) and inactive.
This is my DNS, DHCP and Samba server, and these services continue to
work in the background. Recommendations as to the appropriate bugzilla
component for reporting the problem, and any first-pass problem
resolution advice would be appreciated. I've checked the mailing list,
but nothing popped up as relevant.
Al
15 years
syslog is filling up because of pulseaudio. HELP!
by Steven W. Orr
I'm getting two of these per second. How can I stop it!
Jan 26 11:21:00 saturn pulseaudio[4130]: module-alsa-sink.c: ALSA woke us
up to write new data to the device, but there was actually nothing to
write! Most likely this is an ALSA driver bug. Please report this issue to
the PulseAudio developers.
My messages files are ginormous:
[root@saturn log]# ls -l messages*
-rw------- 1 root root 776571882 Jan 26 11:22 messages
-rw------- 1 root root 5852717 Jan 4 04:03 messages-20090104
-rw------- 1 root root 5879548 Jan 11 04:03 messages-20090111
-rw------- 1 root root 235939198 Jan 18 04:05 messages-20090118
-rw------- 1 root root 609249323 Jan 25 04:30 messages-20090125
Did some upgrade do this to me? :-(
--
Time flies like the wind. Fruit flies like a banana. Stranger things have .0.
happened but none stranger than this. Does your driver's license say Organ ..0
Donor?Black holes are where God divided by zero. Listen to me! We are all- 000
individuals! What if this weren't a hypothetical question?
steveo at syslang.net
15 years, 1 month
F10 and vlc
by Joseph L. Casale
Wow,
out of the loop (I skipped F9), I have vlc and gstreamer-bad/ugly installed.
Totem plays mp3's and xvids fine, but vlc is choppy as heck. Given that totem
is not exactly what I would prefer to use, how does one fix vlc?
Thanks!
jlc
15 years, 1 month
application to suck up RSS to local storage?
by Peter Teoh
I know thunderbird can be used to view RSS news feed, but, like IMAP,
the content is not stored locally, and thus viewing the pages are
slow.
Is there any application in Redhat which I can use to download RSS
newsfeed, so that I can view it locally without much latency delays?
--
Regards,
Peter Teoh
15 years, 1 month
F10: KDE and second display not working
by Tarjei Knapstad
I'm running a two-display setup with my laptop (Dell Precision M65) as
screen 0 and a second LCD screen as screen 1 (through the proprietary
nvidia drivers).
This works perfectly fine in gnome. If I log in with KDE I get a
desktop, toolbars etc. on Screen 0, but only the desktop background on
Screen 1 (no icons, no toolbar, no menu when right-clicking). I had
the same problem in F9, where I just gave up and started using Gnome.
Has anyone experienced anything similar/have any tips on how to fix
this? I'd really like to go back to KDE soon :)
This is with a fully updated F10 install in addition to:
kmod-nvidia-177.82-1.fc10.4.i686
kmod-nvidia-2.6.27.5-117.fc10.i686-177.82-1.fc10.4.i686
xorg-x11-drv-nvidia-177.82-1.fc10.i386
xorg-x11-drv-nvidia-libs-177.82-1.fc10.i386
Thanks,
--
Tarjei
15 years, 1 month