Re: [ale] [SOLVED] Unable to Run Citrix x86_64, missing libXaw.so.7
by Marc Ferguson
On Mon, Jan 26, 2009 at 4:19 PM, Jim Kinney <jim.kinney(a)gmail.com> wrote:
> The 32/64 bit dual lib shuffle. I have found that most closed-source,
> commercial products are barely usable on 64-bit Linux because of the
> hard coded lib needs. Sometimes a symlink to the 64-bit lib works.
> Sometimes it causes a crash.
>
> yum install libXaw.i386 works if the base/updates.repo is tweaked to
> include an additional i386 arch. Basically block copy the original one
> and replace $arch with i386 in the block.
>
> 2009/1/26 Marc Ferguson <marcferguson(a)gmail.com>:
> > Hi,
> >
> > I'm running Fedora 10 x86_64 and I'm trying to run Citrix Presentation
> > server Clients for UNIX Version 10.x. When I try to run it, it basically
> > says I'm missing libXaw.so.7. I found the solution, but I wanted to post
> > this for reference. Basically you need to install libXaw.i386 even
> though
> > libXaw.x86_64 is present.
> >
> > [marc@unicron ICAClient]$ ldd wfica
> > linux-gate.so.1 => (0x00110000)
> > libXaw.so.7 => not found
> > libXt.so.6 => /usr/lib/libXt.so.6 (0x0012a000)
> > libX11.so.6 => /usr/lib/libX11.so.6 (0x06b6e000)
> > libdl.so.2 => /lib/libdl.so.2 (0x0036f000)
> > libpthread.so.0 => /lib/libpthread.so.0 (0x00376000)
> > libc.so.6 => /lib/libc.so.6 (0x001f9000)
> > libXext.so.6 => /usr/lib/libXext.so.6 (0x00184000)
> > libSM.so.6 => /usr/lib/libSM.so.6 (0x00df5000)
> > libICE.so.6 => /usr/lib/libICE.so.6 (0x00546000)
> > libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0x001b0000)
> > libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00b2a000)
> > /lib/ld-linux.so.2 (0x001d4000)
> > libXau.so.6 => /usr/lib/libXau.so.6 (0x00195000)
> > libuuid.so.1 => /lib/libuuid.so.1 (0x00540000)
> > libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x001b9000)
> >
> > I then do a search to see if I have this library installed.
> >
> > [marc@unicron ICAClient]$ sudo yum install libXaw
> > Loaded plugins: refresh-packagekit
> > Setting up Install Process
> > Parsing package install arguments
> > Package libXaw-1.0.4-3.fc10.x86_64 already installed and latest version
> > Nothing to do
> >
> >
> > --
> > Marc F.
> >
> > www.fergytech.com
> > Registered Linux User: #410978
> >
> > "When life gives me lemons... I make Linuxaide, hmm good stuff!" -Marc F.
> >
> > _______________________________________________
> > Ale mailing list
> > Ale(a)ale.org
> > http://mail.ale.org/mailman/listinfo/ale
> >
> >
>
>
>
> --
> --
> James P. Kinney III
> _______________________________________________
> Ale mailing list
> Ale(a)ale.org
> http://mail.ale.org/mailman/listinfo/ale
>
I may have spoken too soon. Interesting issue though. By installing the
correct i386 library I was able to run the Citrix client via my web browser
- I am unable though to run the client by itself. If I run
/usr/lib/ICAClient/wfcmgr - I get this error:
*/usr/lib/ICAClient/wfcmgr: error while loading shared libraries:
libXm.so.3: cannot open shared object file: No such file or directory*
So after some poking around, I found that OpenMotif is supposed to have
libXm.so.3 library. I install both i386 and x86_64 packages from
ftp://ftp.ics.com/openmotif/2.3/2.3.1/, which I got that link directly from
http://www.motifzone.net/.
I tried to run it after that and got the same error. So; I uninstalled then
reinstalled the Citrix client, but I'm still getting the same issue. I've
tried 4 different version of openmotif and I'm still getting the same error.
*openmotif-2.2.3-2.i386.rpm
openmotif-devel-2.2.3-2.i386.rpm
openmotif-2.2.4-0.1.i386.rpm
openmotif-devel-2.2.4-0.1.i386.rpm
openmotif-2.3.1-1.fc9.i386.rpm
openmotif-devel-2.3.1-1.fc9.i386.rpm
openmotif-2.3.1-1.fc9.x86_64.rpm
openmotif-devel-2.3.1-1.fc9.x86_64.rpm*
Please help me understand this library issue. Thanks.
--
Marc F.
www.fergytech.com
Registered Linux User: #410978
"When life gives me lemons... I make Linuxaide, hmm good stuff!" -Marc F.
14 years, 10 months
bluetooth mounse becomes erratic when network load is moderate.
by Wendell Nichols
I have a bluetooth mouse which works nicely most of the time, but if I
run a process which consumes network resources (and my network is
wireless) the pointer lags behind the mouse movement. Even playing
music via an nfs mounted disk is enough to cause this problem. Anyone
else see or overcome that?
wcn
14 years, 11 months
ssh problem
by Dave Feustel
I am trying to set up ssh for use on my local network.
When I try to access f9 with ssh from suse, the connection is refused.
When I try to access suse with ssh from f9, ssh hangs.
AFICT, all other ssh invocations on both f9 and suse succeed.
Is ssh being blocked by a problem with the f9 firewall?
How can I check?
Thanks.
14 years, 11 months
gallery2 update that came out today.
by Jason Dickerson
The update will break the gallery; however there is a workaround. Before
you run the upgrade from http://<host>/gallery2/upgrade, you need to add the
following symlink
ln -s /usr/share/php/Smarty /usr/share/gallery2/lib/smarty
If you have already run the upgrade, you can still just add the symlink and
it will work. I only say to add it before, to minimize the system check
errors.
After the symlink is added, the upgrade system checks detect 3 files missing
(2 documentation files and a jar file, g2_db2.jar) and 2 modified
(Smarty_Compiler.class.php and modifier.debug_print_var.php). These do not
seem to present an issue.
As far as I can tell, everything is working after the symlink was created.
Jason Dickerson
14 years, 11 months
Seagate disk problems (NCQ bug???)
by Wolfgang S. Rupprecht
After running flawlessly for 6+ months I just had my Seagate
ST31500343AS (w. SD35 firmware) flake out. Does this look like the NCQ
bug or just a random event? The final error msg was around the time the
machine hung hard.
Apr 28 04:26:29 arbol kernel: ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22
Apr 28 04:26:29 arbol kernel: ata1: softreset failed (device not ready)
Apr 28 04:26:29 arbol kernel: ata1: failed due to HW bug, retry pmp=0
Apr 28 04:26:29 arbol kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 28 04:26:29 arbol kernel: ata1.00: ATA-8: ST31500343AS, SD35, max UDMA/133
Apr 28 04:26:29 arbol kernel: ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Apr 28 04:26:29 arbol kernel: ata1.00: configured for UDMA/133
Apr 28 06:17:02 arbol kernel: ata1.00: exception Emask 0x50 SAct 0x1 SErr 0x90a02 action 0xe frozen
Apr 28 06:17:02 arbol kernel: ata1.00: irq_stat 0x00400000, PHY RDY changed
Apr 28 06:17:02 arbol kernel: ata1: SError: { RecovComm Persist HostInt PHYRdyChg 10B8B }
Apr 28 06:17:02 arbol kernel: ata1.00: cmd 60/08:00:e1:81:24/00:00:74:00:00/40 tag 0 ncq 4096 in
Apr 28 06:17:02 arbol kernel: res 40/00:00:e1:81:24/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
Apr 28 06:17:02 arbol kernel: ata1.00: status: { DRDY }
Apr 28 06:17:02 arbol kernel: ata1: hard resetting link
Apr 28 06:17:04 arbol kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 28 06:17:09 arbol kernel: ata1.00: qc timeout (cmd 0xec)
Apr 28 06:17:09 arbol kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Apr 28 06:17:09 arbol kernel: ata1.00: revalidation failed (errno=-5)
Apr 28 06:17:09 arbol kernel: ata1: hard resetting link
Apr 28 06:17:11 arbol kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 28 06:17:21 arbol kernel: ata1.00: qc timeout (cmd 0xec)
Apr 28 06:17:21 arbol kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Apr 28 06:17:21 arbol kernel: ata1.00: revalidation failed (errno=-5)
Apr 28 06:17:21 arbol kernel: ata1: limiting SATA link speed to 1.5 Gbps
Apr 28 06:17:21 arbol kernel: ata1: hard resetting link
Apr 28 06:17:22 arbol kernel: ata1: softreset failed (device not ready)
Apr 28 06:17:22 arbol kernel: ata1: failed due to HW bug, retry pmp=0
Apr 28 06:17:22 arbol kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Apr 28 06:17:22 arbol kernel: ata1.00: configured for UDMA/133
Apr 28 06:17:22 arbol kernel: ata1: EH complete
Apr 28 06:17:22 arbol kernel: sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB)
Apr 28 06:17:22 arbol kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 28 06:17:22 arbol kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 28 06:24:03 arbol kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
Apr 28 06:24:03 arbol kernel: ata1: irq_stat 0x00400000, PHY RDY changed
Apr 28 06:24:03 arbol kernel: ata1: SError: { Persist PHYRdyChg 10B8B }
Apr 28 06:24:03 arbol kernel: ata1: hard resetting link
Apr 28 06:24:05 arbol kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Apr 28 06:24:10 arbol kernel: ata1.00: qc timeout (cmd 0xec)
Apr 28 06:24:10 arbol kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Apr 28 06:24:10 arbol kernel: ata1.00: revalidation failed (errno=-5)
Apr 28 06:24:10 arbol kernel: ata1: hard resetting link
Apr 28 06:24:12 arbol kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Apr 28 06:24:22 arbol kernel: ata1.00: qc timeout (cmd 0xec)
Apr 28 06:24:22 arbol kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Apr 28 06:24:22 arbol kernel: ata1.00: revalidation failed (errno=-5)
Apr 28 06:24:22 arbol kernel: ata1: hard resetting link
Apr 28 06:24:23 arbol kernel: ata1: softreset failed (device not ready)
Apr 28 06:24:23 arbol kernel: ata1: failed due to HW bug, retry pmp=0
Apr 28 06:24:23 arbol kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Apr 28 06:24:24 arbol kernel: ata1.00: configured for UDMA/133
Apr 28 06:24:24 arbol kernel: ata1: EH complete
Apr 28 06:24:24 arbol kernel: sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB)
Apr 28 06:24:24 arbol kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 28 06:24:24 arbol kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 28 06:41:26 arbol kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
Apr 28 06:41:26 arbol kernel: ata1: irq_stat 0x00400000, PHY RDY changed
Apr 28 06:41:26 arbol kernel: ata1: SError: { Persist PHYRdyChg 10B8B }
Apr 28 06:41:26 arbol kernel: ata1: hard resetting link
Apr 28 06:41:28 arbol kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Apr 28 06:41:33 arbol kernel: ata1.00: qc timeout (cmd 0xec)
Apr 28 06:41:33 arbol kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Apr 28 06:41:33 arbol kernel: ata1.00: revalidation failed (errno=-5)
Apr 28 06:41:33 arbol kernel: ata1: hard resetting link
Apr 28 06:41:34 arbol kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Apr 28 06:41:44 arbol kernel: ata1.00: qc timeout (cmd 0xec)
Apr 28 06:41:44 arbol kernel: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Apr 28 06:41:44 arbol kernel: ata1.00: revalidation failed (errno=-5)
Apr 28 06:41:44 arbol kernel: ata1: hard resetting link
Apr 28 06:41:46 arbol kernel: ata1: softreset failed (device not ready)
Apr 28 06:41:46 arbol kernel: ata1: failed due to HW bug, retry pmp=0
Apr 28 06:41:46 arbol kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Apr 28 06:41:46 arbol kernel: ata1.00: configured for UDMA/133
Apr 28 06:41:46 arbol kernel: ata1: EH complete
Apr 28 06:41:46 arbol kernel: sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB)
Apr 28 06:41:46 arbol kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr 28 06:41:46 arbol kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
-wolfgang
--
Wolfgang S. Rupprecht http://www.full-steam.org/ (ipv6-only)
You may need to config 6to4 to see the above pages.
15 years
Remote administration of FC 10 headless servers.
by Wendell Nichols
I just installed FC10 on my home server. I access it via xrdp. The
first time I tried to install some packages via the graphical package
manager it told me that I was not using a local console, and exited.
This machine doesn't have a console! How are we supposed to administer
headless servers?
wcn
15 years
fedora 10 weird mplayer playback
by Janez Košmrlj
I upgraded to fedora 10 about a month ago. And since then mplayer
doesn't play videos smoothly. The sound is ok, but the video plays to
slow for a couple of seconds, then it plays to fast, to catch up with
the sound, then it slows down again and so on.
I did a fresh install from the live cd, but i reused the old home dir,
so the user settings stayed the same.
I installed Mplayer from the rpmfusion repo. I use the x86-64
distribution, on an AMD Pheom II X3.
My Brother has similar problems on a completely fresh install (including
home dir) on a core 2 duo laptop.
15 years
FC10 and NDISwrapper
by Gary Stainburn
Hi folks.
I'm trying to get WIFI working on my new DELL and I've been told to try
ndiswrappers.
I tried
yum search ndiswrapper
and varients, but nothing was found. I then found RPMs using rpmsearch and
downloaded them.
Now when I try 'yum localinstall' it adds the kernel as a dependancy,
downloads it, and then errors saying it is already installed.
If I try 'rpm -i' it fails on dependancy for /boot/vmlinuz
I've included the session log. Has anyone any suggestions?
Gary
[root@gary gary]# yum localinstall ~gary/ndiswrapper-1.54-20.fc10.i386.rpm
ndiswrapper-kmdl-2.6.27.21-170.2.56.fc10-1.54-20.fc10.i586.rpm
Loaded plugins: refresh-packagekit
Setting up Local Package Process
Examining /home/gary/ndiswrapper-1.54-20.fc10.i386.rpm:
ndiswrapper-1.54-20.fc10.i386
Marking /home/gary/ndiswrapper-1.54-20.fc10.i386.rpm to be installed
fedora |
2.8 kB 00:00
adobe-linux-i386 |
951 B 00:00
updates |
2.3 kB 00:00
Examining ndiswrapper-kmdl-2.6.27.21-170.2.56.fc10-1.54-20.fc10.i586.rpm:
ndiswrapper-kmdl-2.6.27.21-170.2.56.fc10-1.54-20.fc10.i586
Marking ndiswrapper-kmdl-2.6.27.21-170.2.56.fc10-1.54-20.fc10.i586.rpm to be
installed
Resolving Dependencies
--> Running transaction check
---> Package ndiswrapper.i386 0:1.54-20.fc10 set to be updated
---> Package ndiswrapper-kmdl-2.6.27.21-170.2.56.fc10.i586 0:1.54-20.fc10 set
to be updated
--> Processing Dependency: /boot/vmlinuz-2.6.27.21-170.2.56.fc10.i586 for
package: ndiswrapper-kmdl-2.6.27.21-170.2.56.fc10
Importing additional filelist information
--> Running transaction check
---> Package kernel.i586 0:2.6.27.21-170.2.56.fc10 set to be installed
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================================================================================================
Package Arch Version
Repository Size
=============================================================================================================================================================
Installing:
ndiswrapper i386
1.54-20.fc10 /home/gary/ndiswrapper-1.54-20.fc10.i386.rpm
48 k
ndiswrapper-kmdl-2.6.27.21-170.2.56.fc10 i586 1.54-20.fc10
ndiswrapper-kmdl-2.6.27.21-170.2.56.fc10-1.54-20.fc10.i586.rpm 186 k
Installing for dependencies:
kernel i586 2.6.27.21-170.2.56.fc10
updates 19 M
Transaction Summary
=============================================================================================================================================================
Install 3 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total size: 19 M
Total download size: 234 k
Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Check Error:
package kernel-2.6.27.21-170.2.56.fc10.i586 is already installed
Error Summary
-------------
[root@gary gary]# rpm -i ndiswrapper-1.54-20.fc10.i386.rpm
ndiswrapper-kmdl-2.6.27.21-170.2.56.fc10-1.54-20.fc10.i586.rpm
warning: ndiswrapper-1.54-20.fc10.i386.rpm: Header V4 DSA signature: NOKEY,
key ID 66534c2b
error: Failed dependencies:
/boot/vmlinuz-2.6.27.21-170.2.56.fc10.i586 is needed by
ndiswrapper-kmdl-2.6.27.21-170.2.56.fc10-1.54-20.fc10.i586
[root@gary gary]# uname -a
Linux gary.ringways.co.uk 2.6.27.21-170.2.56.fc10.i686 #1 SMP Mon Mar 23
23:37:54 EDT 2009 i686 i686 i386 GNU/Linux
[root@gary gary]#
--
Gary Stainburn
This email does not contain private or confidential material as it
may be snooped on by interested government parties for unknown
and undisclosed purposes - Regulation of Investigatory Powers Act, 2000
15 years
Editor to program in C
by Paul Smith
Dear All,
I am starting to learn how to program in C, and I am looking for a
proper editor for that. Do you recommend Kate to me? Or is there
something better?
Thanks in advance,
Paul
15 years
Kernel-firmware package and Anaconda.
by Bram_Gro
Hi,
For those (like me) who wish to avoid proprietary firmware, they have
been moved since Fedora 10 into a single package called kernel-firmware.
Can I uncheck this kernel-firmware package during the custom
installation process within Anaconda, or is this done otherwise?
-----------------------------------------------------------------------
Is a custom install to have minimalised installation, only possible to
preform with a 4x.GB DVD release, or is this option also available in
the live CDs/USBs?
Bram.
15 years
