wireshark under KDE?
by Timothy Murphy
I'm running Fedora-17/KDE on my laptop,
and am trying to run wireshark.
I've yum-installed wireshark, wireshark-gnome and wireshark-devel.
When I run wireshark (as root) it gets as far as
"Registering Python dissectors"
and then crashes:
------------------------
[root@rose tim]# wireshark
Segmentation fault (core dumped)
------------------------
Any advice or suggestions gratefully received.
--
Timothy Murphy
e-mail: gayleard /at/ eircom.net
tel: +353-86-2336090, +353-1-2842366
s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland
11 years, 7 months
Fixing a crashed disk
by SternData
I quite stupidly unplugged my computer today when my foot got tangled in
the power strip. On reboot, I was notified
Device: /dev/sda [SAT], 8 Offline uncorrectable sectors
Smartctl tells me the problem is at LBA 2014551336 (this is a 2TB disk).
Following the info here
http://kaivanov.blogspot.com/2010/09/fixing-disk-problems-under-linux-wit...
I'm not able to determine what file might be sitting on this block.
tune2fs -l /dev/sda5 |grep Block
Block count: 472552448
Block size: 4096
Blocks per group: 32768
[root@sds-desk-2 ~]# debugfs
debugfs 1.42.3 (14-May-2012)
debugfs: open /dev/sda5
debugfs: icheck 235992741
Block Inode number
235992741 8
debugfs: ncheck 8
Inode Pathname
This suggests that the problem is not in a currently extant file.
I'm now trying the suggestion of writing from /dev/zero to a file in
/home while in single users mode. Given that I have 1.5TB to fill,
this could take a while.
Here's the question: If I just reformat and restore /home from a
recent backup, will the disk automatically deal with the sectors
pending reallocation?
11 years, 7 months
bc and built-in funcs
by JD
Hi all
I have:
$ rpm -q bc
bc-1.06.95-3.fc15.i686
I was searching the web for bc funs to calculate cube roots
and other arbitrary roots. Almost all of the func I found
assume that bc has the built-in funcs l and e which take
a numeric arg.
Yet my bc has no such funcs.
Is the version above broken?
11 years, 7 months
No Music or Movies Play in F17 - Missing Gstreamer?....
by EGO-II.1
I have a Gateway T-6321 that I recently had to re-install Fedora Linux
v17 on. I've put just about everything that was on there from before
(Totem, Clementine...Thunderbird etc.) but when I try to play movies in
Totem or music in Clementine I get errors such as:
Clementine: - "Your GStreamer installation is missing a plugin."
Totem: - "A program requires additional plugins to decode this file:
The following plugins are required:
H.264 decoder
MPEG-4 AAC decoder
Do you want to search for these now?
My problem is when it searches for these it tells me they're already
installed? What is the solution for this kind of error? is there a file
I need? or a missing piece of this puzzle?
Thanx!
EGO II
11 years, 7 months
ABRT didn't detect segfaults of usb_modeswitch
by Clemens Eisserer
Hi,
Running updates-testing I noticed once my usb modem didn't work -
caused by usb_mdoeswitch segfaulting 3 times in a row:
Oct 29 18:37:27 localhost kernel: [ 23.740625]
usb_modeswitch_[1374]: segfault at 7fff0251aff8 ip 000000300087f434 sp
00007fff0251b000 error 6 in libc-2.15.so[3000800000+1ac000]
Oct 29 18:38:07 localhost kernel: [ 64.128201]
usb_modeswitch_[1515]: segfault at 7fffd8b8ae74 ip 0000003000874b06 sp
00007fffd8b8ae60 error 6 in libc-2.15.so[3000800000+1ac000]
Oct 29 18:38:29 localhost kernel: [ 86.373114]
usb_modeswitch_[1685]: segfault at 7fff7eb4eff8 ip 00000030008ed629 sp
00007fff7eb4f000 error 6 in libc-2.15.so[3000800000+1ac000]
ABRT didn't detect those crashes. Is this due to a technical issue?
Is there any way to get the name of the function where usb_modeswitch
crashed in the above cases, so I can at least file a bug-report?
Thanks, Clemens
11 years, 7 months
Fax to email gateway
by Gary Stainburn
Hi folks.
I'm looking to create a fax gateway, either fax to email or fax to program.
I've googled this but everything I've looked at it at least 5 years old. I was
wondering what people are using these days and what's good now.
Gary
11 years, 7 months
Purge old eth1, add new nic as eth0
by Frank Murphy
How can I completly remove all remnants of an old eth1
Everytime I go to add a new nic it wants to call it eth1
I will be replacing the old nic with ano identical chipped card,
which it wants to call eth1
I would prefer eth0
F17 using system-config-network
I have through s-c-n removed all hardware nic,
also removeed ~/network-scripts/ifcfg-eth*
Keeps coming back,
Where else do I look.
--
Regards,
Frank
"Jack of all, fubars"
11 years, 7 months
Architectural CAD
by Robert G. (Doc) Savage
Can anyone suggest an architectural CAD package comparable to AutoCAD
for use in preparing layered drawings for residential remodeling?
--Doc Savage
Fairview Heights, IL
11 years, 7 months
RE: Architectural CAD
by Errol Mangwiro
AutoCAD WS??
https://chrome.google.com/webstore/detail/autocad-ws/dcjeclnkejmbepoibfna...
From: Robert G. (Doc) Savage
Sent: 29 October 2012 3:35 AM
To: Community support for Fedora users
Subject: Re: Architectural CAD
On Sun, 2012-10-28 at 16:33 -0400, Doug wrote:
> On 10/28/2012 03:06 PM, Mark LaPierre wrote:
> > On 10/28/2012 01:56 PM, Robert G. (Doc) Savage wrote:
> >> Can anyone suggest an architectural CAD package comparable to AutoCAD
> >> for use in preparing layered drawings for residential remodeling?
> >>
> >> --Doc Savage
> >> Fairview Heights, IL
> >>
> >
> > I use Ribbon Soft Qcad. There is a free edition but I use the pro
> > edition.
> >
> > http://www.ribbonsoft.com/en/qcad
> >
> I looked at some of these things, and the free QCad is probably the
> nearest to AutoCAAD,
> but it's NOT AutoCAD--some of the commands don't work. And some of the
> features
> that you might need are not there. (I couldn't find "scale".) It's the
> same old problem--
> any imitation CAD routine will cause you to have to learn all over
> again. If you have
> Windows, there are sources of (quite a bit) lower-priced AutoCAD. I
> won't go into
> detail but there are! You just can't call Autodesk for help! I will
> never understand
> why some of these ultra-high-priced outfits don't make older editions
> available for
> a reasonable price. AutoCad could sell the old Light version from 2000
> or so for,
> say, $150, which is probably not much lower than when it was new, and make a
> nice buck out of people who will never buy the latest four-figure
> version--or the five-figure
> full-blown version.
With you there Doug. Having seen Windows 8, maybe Autodesk will do an
about face and return to UNIX/Linux as its primary platform.
Before hiring a contractor, I need to revise old hard copy drawings and
completely redo the electrical and lighting layers. The ability to build
a list of materials would be a real plus.
--Doc Savage
Fairview Heights
--
users mailing list
users(a)lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
11 years, 7 months
