Re: Most Efficient Network File sharing protocol?
by Pete Travis
On Mar 4, 2014 8:32 AM, "Pete Travis" <lists(a)petetravis.com> wrote:
>
>
> On Mar 3, 2014 7:58 PM, "Dan Mossor" <dan.mossor(a)outlook.com> wrote:
>
> .
> >
> > When the DVD is built, I pull the updates across the local network to
my machine and build the DVD there. These <4GiB transfers sometimes take
close to 3 to 4 hours using NFS, and it is a Gigabit network. rsync
appeared to be a bit faster, but my goal is to find the most efficient
transfer method to move lots of little -and some big - files across a local
network.
> >
>
> > Dan Mossor
>
> What kind of NAS is this? Are the disks in good shape? Even with 10/100,
the transfer rate should be faster than DVD write speed, allowing you to
burn the disc on the fly, without copying everything to the workstation
first.
>
> Gigabit has a theoretical max of ~125MB/s. You're nowhere near that;
changing the transfer protocol to gain a few percentage points on
throughout is a moot question when the bottleneck is clearly somewhere
else. If your workstation is a Raspberry Pi, you have probably reached it's
limits and should probably consider an upgrade for any measureable
performance gain.
>
> --Pete
Oops, sorry for dragging off-list, Dan .
10 years, 3 months
vtnr? seat0? What does this gibberish mean?
by Tom Horsley
I've started getting lots of these in my logs:
crond: pam_systemd(crond:session): Ignoring vtnr 0 for which is not seat0
pam_systemd(sshd:session): Ignoring vtnr 0 for which is not seat0
I'm sure I can just ignore them, but what the heck do they mean?
10 years, 3 months
remmina
by Patrick Dupre
Hello,
Using remmina/ssh I cannot log on the remote machine (gnome3)
Then if I do not work, the session log my off and I cannot log back in
I can dial my password, but I can never unlock the screen, just cancel.
What is wrong?
This is the end of the log file:
wrapper([object _private_Gdm_Client],[object _private_Gio_SimpleAsyncResult])@/usr/share/gjs-1.0/lang.js:204
"'
JS ERROR: !!! Exception was: TypeError: Object 0x7f9fa2195a50 is not a subclass of (null), it's a GLib_Error
JS ERROR: !!! message = '"Object 0x7f9fa2195a50 is not a subclass of (null), it's a GLib_Error"'
JS ERROR: !!! fileName = '"/usr/share/gnome-shell/js/gdm/util.js"'
JS ERROR: !!! lineNumber = '159'
JS ERROR: !!! stack = '"([object _private_Gdm_Client],[object _private_Gio_SimpleAsyncResult])@/usr/share/gnome-shell/js/gdm/util.js:159
wrapper([object _private_Gdm_Client],[object _private_Gio_SimpleAsyncResult])@/usr/share/gjs-1.0/lang.js:204
"'
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 3 months
remmina
by Patrick Dupre
Hello,
Trying to connect to a fedora 18 machine from a fedora 20 machine
and using ssh/xdmcp, I get:
Command xqproxy not found on SSH server
Can I fix this?
thank.
Trying to connect on a fedora 20 on the same lan, I get (ssh/vnc)
SSH password authentication failed: Access denied. Authentication that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
and the log file:
Xvnc TigerVNC 1.3.0 - built Jan 21 2014 09:42:49
Copyright (C) 1999-2011 TigerVNC Team and many others (see README.txt)
See http://www.tigervnc.org for information on TigerVNC.
Underlying X server release 11404000, The X.Org Foundation
Initializing built-in extension VNC-EXTENSION
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension GLX
Sun Mar 2 02:16:15 2014
vncext: VNC extension running!
vncext: Listening for VNC connections on all interface(s), port 5901
vncext: created VNC server for screen 0
gnome-session-is-accelerated: llvmpipe detected.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 3 months
kdepim (kaddressbook and kmail) lost existing data after upgrade
by Chris Caudle
I have been using mostly webmail, but still have a lot of past email and
my contacts stored locally on kdepim. I had not used the kde applications
for a while, and recently noticed that my old emails and contacts no
longer show up in kmail and kaddress book. There have been several
updates along the way, so I am not sure when exactly my existing mail and
contacts stopped showing up.
I can still see the messages in my ~/Mail directory, and my contacts seem
to be available as vcf files in ~/.local/share/contacts.
How should I go about making the applications import or otherwise
acknowledge the existing data? Any idea what changed that would make
kaddressbook and kmail "forget" about the existing data?
--
Chris Caudle
10 years, 3 months
safe to remove DNF?
by John Aldrich
DNF keeps crashing on me, and I was going to remove it, but it wants to remove
a few other things like "initial-setup" and "anaconda." I'm scared to remove
those because I don't want to kill my system. Is it safe to remove all three
packages on a running system???
10 years, 3 months
Re: vncviewer
by Patrick Dupre
OK,
Very good, it works now
> On 03/02/14 21:56, Patrick Dupre wrote:
> >
> >> ----- Original Message -----
> >> From: Ed Greshko
> >> Sent: 03/02/14 02:47 PM
> >> To: Community support for Fedora users
> >> Subject: Re: vncviewer
> >>
> >> On 03/02/14 21:06, Ed Greshko wrote:
> >>> nmap -v -n -P0 -p5900-5906 192.168.0.101
> >> typo....
> >>
> >> nmap -v -n -P0 -p5900-5906 192.168.1.101
> > Starting Nmap 6.01 ( http://nmap.org ) at 2014-03-02 14:50 CET
> > Initiating Connect Scan at 14:50
> > Scanning 192.168.1.101 [7 ports]
> > Completed Connect Scan at 14:50, 1.10s elapsed (7 total ports)
> > Nmap scan report for 192.168.1.101
> > Host is up (0.00049s latency).
> > PORT STATE SERVICE
> > 5900/tcp filtered vnc
> > 5901/tcp filtered vnc-1
> > 5902/tcp filtered vnc-2
> > 5903/tcp filtered vnc-3
> > 5904/tcp filtered unknown
> > 5905/tcp filtered unknown
> > 5906/tcp filtered unknown
>
> Yes, your firewall is blocking the port needed.....
>
> >
> > Read data files from: /usr/bin/../share/nmap
> > Nmap done: 1 IP address (1 host up) scanned in 1.18 seconds
> >
> >
> > on server:
> > netstat -napt | grep -i vnc
> > tcp 0 0 0.0.0.0:5901 0.0.0.0:* LISTEN 3921/Xvnc
> > tcp 0 0 0.0.0.0:6001 0.0.0.0:* LISTEN 3921/Xvnc
> > tcp6 0 0 :::6001 :::* LISTEN 3921/Xvnc
> >
> > iptables -L
> >
>
> Why don't you just run /usr/bin/firewall-config and check the box for vnc-server for both "runtime" and "persistent" and be done with it....
>
> --
> Getting tired of non-Fedora discussions and self-serving posts
> --
> users mailing list
> users(a)lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 3 months
Re: remmina
by Patrick Dupre
> ----- Original Message -----
> From: Ed Greshko
> Sent: 03/02/14 02:16 PM
> To: Community support for Fedora users
> Subject: Re: remmina
>
> On 03/02/14 20:33, Patrick Dupre wrote:
> > Subject: remmina
> >
> > Hello,
> >
> > Trying to connect on a fedora 20 on the same lan (ssh/vnc)
> > I can never get the connection:
>
> Are you correctly specifying the vnc host IP address and display number?
>
> You'll most likely want 192.168.0.101:1 according to your other message.
>
It is the same:
vncviewer 192.168.1.101:1
TigerVNC Viewer for X version 1.1.0 - built Nov 22 2011 14:21:13
Copyright (C) 1999-2011 TigerVNC Team and many others (see README.txt)
See http://www.tigervnc.org for information on TigerVNC.
Sun Mar 2 14:58:23 2014
main: unable connect to socket: No route to host (113)
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 3 months
Re: vncviewer
by Patrick Dupre
> ----- Original Message -----
> From: Ed Greshko
> Sent: 03/02/14 02:47 PM
> To: Community support for Fedora users
> Subject: Re: vncviewer
>
> On 03/02/14 21:06, Ed Greshko wrote:
> > nmap -v -n -P0 -p5900-5906 192.168.0.101
>
> typo....
>
> nmap -v -n -P0 -p5900-5906 192.168.1.101
Starting Nmap 6.01 ( http://nmap.org ) at 2014-03-02 14:50 CET
Initiating Connect Scan at 14:50
Scanning 192.168.1.101 [7 ports]
Completed Connect Scan at 14:50, 1.10s elapsed (7 total ports)
Nmap scan report for 192.168.1.101
Host is up (0.00049s latency).
PORT STATE SERVICE
5900/tcp filtered vnc
5901/tcp filtered vnc-1
5902/tcp filtered vnc-2
5903/tcp filtered vnc-3
5904/tcp filtered unknown
5905/tcp filtered unknown
5906/tcp filtered unknown
Read data files from: /usr/bin/../share/nmap
Nmap done: 1 IP address (1 host up) scanned in 1.18 seconds
on server:
netstat -napt | grep -i vnc
tcp 0 0 0.0.0.0:5901 0.0.0.0:* LISTEN 3921/Xvnc
tcp 0 0 0.0.0.0:6001 0.0.0.0:* LISTEN 3921/Xvnc
tcp6 0 0 :::6001 :::* LISTEN 3921/Xvnc
iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED
ACCEPT all -- anywhere anywhere
INPUT_direct all -- anywhere anywhere
INPUT_ZONES_SOURCE all -- anywhere anywhere
INPUT_ZONES all -- anywhere anywhere
ACCEPT icmp -- anywhere anywhere
REJECT all -- anywhere anywhere reject-with icmp-host-prohibited
Chain FORWARD (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED
ACCEPT all -- anywhere anywhere
FORWARD_direct all -- anywhere anywhere
FORWARD_IN_ZONES_SOURCE all -- anywhere anywhere
FORWARD_IN_ZONES all -- anywhere anywhere
FORWARD_OUT_ZONES_SOURCE all -- anywhere anywhere
FORWARD_OUT_ZONES all -- anywhere anywhere
ACCEPT icmp -- anywhere anywhere
REJECT all -- anywhere anywhere reject-with icmp-host-prohibited
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
OUTPUT_direct all -- anywhere anywhere
Chain FORWARD_IN_ZONES (1 references)
target prot opt source destination
FWDI_public all -- anywhere anywhere [goto]
FWDI_public all -- anywhere anywhere [goto]
Chain FORWARD_IN_ZONES_SOURCE (1 references)
target prot opt source destination
Chain FORWARD_OUT_ZONES (1 references)
target prot opt source destination
FWDO_public all -- anywhere anywhere [goto]
FWDO_public all -- anywhere anywhere [goto]
Chain FORWARD_OUT_ZONES_SOURCE (1 references)
target prot opt source destination
Chain FORWARD_direct (1 references)
target prot opt source destination
Chain FWDI_public (2 references)
target prot opt source destination
FWDI_public_log all -- anywhere anywhere
FWDI_public_deny all -- anywhere anywhere
FWDI_public_allow all -- anywhere anywhere
Chain FWDI_public_allow (1 references)
target prot opt source destination
Chain FWDI_public_deny (1 references)
target prot opt source destination
Chain FWDI_public_log (1 references)
target prot opt source destination
Chain FWDO_public (2 references)
target prot opt source destination
FWDO_public_log all -- anywhere anywhere
FWDO_public_deny all -- anywhere anywhere
FWDO_public_allow all -- anywhere anywhere
Chain FWDO_public_allow (1 references)
target prot opt source destination
Chain FWDO_public_deny (1 references)
target prot opt source destination
Chain FWDO_public_log (1 references)
target prot opt source destination
Chain INPUT_ZONES (1 references)
target prot opt source destination
IN_public all -- anywhere anywhere [goto]
IN_public all -- anywhere anywhere [goto]
Chain INPUT_ZONES_SOURCE (1 references)
target prot opt source destination
Chain INPUT_direct (1 references)
target prot opt source destination
Chain IN_public (2 references)
target prot opt source destination
IN_public_log all -- anywhere anywhere
IN_public_deny all -- anywhere anywhere
IN_public_allow all -- anywhere anywhere
Chain IN_public_allow (1 references)
target prot opt source destination
ACCEPT udp -- anywhere 224.0.0.251 udp dpt:mdns ctstate NEW
ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ctstate NEW
Chain IN_public_deny (1 references)
target prot opt source destination
Chain IN_public_log (1 references)
target prot opt source destination
>
>
> --
> Getting tired of non-Fedora discussions and self-serving posts
> --
> users mailing list
> users(a)lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 3 months
