Failure with Intel wireless on Dell XPS 17
by Go Canes
After a dnf update today, I was unable to bring up my normal wireless
connection on a Dell XPS 17 laptop. I was able to get a connection
via my cellphone, and did a "dnf downgrade iwl*-firmware
NetworkManager*", and after a reboot I am back online.
From info in /var/log/messages, it looks like the relevant firmware
packages are iwl7260-firmware-1:25.30.13.0-76.fc25.noarch which was
downgraded to iwl7260-firmware-1:25.30.13.0-68.fc25.noarch.
I'm happy to open a bugzilla if there isn't one on this issue, but it
seems to me I should have more info than what I posted above, and so
am looking for advice/guidance from the list.
Thanks in advance!
6 years, 5 months
F27: wrong screen resolution after upgrade from F25
by Frédéric
Hi,
I have upgraded my system from F25 to F27 with dnf system-upgrade.
My laptop screen resolution is Full HD but I get 1024x768 which is awful.
I have an nvidia video card but use the nouveau driver (also tried the
nvidia driver from rpmfusion with the same effect).
At first, I thought it was a Plasma issue because sddm also crashes
when I start a Plasma session but startx from a vtty starts the plasma
desktop without any issue apart from the wrong screen resolution. So I
after some discussion on the KDE list, I now post on the fedora list
hoping for some help from the larger audience.
Thanks,
F
6 years, 5 months
Re: F27: cannot open a Plasma session (after upgrade from F25)
by Ed Greshko
On 01/09/18 05:55, Felix Miata wrote:
> Frédéric composed on 2018-01-08 15:41 (UTC+0100):
>
>> when I type /usr/sbin/fbset from a vtty (Ctrl+Alt+F2), this is what I
>> get:
>> open /dev/fb0: no such file or directory
> That's bad, probably indication of low level problem, kernel or video support in
> the kernel, not at all a KDE or SDDM fault. Maybe your eradication of
> proprietary NVidia support was incomplete. Someone else will have to help you
> figure out if there is any NVidia remaining to be removed, something module
> and/or blacklist related in /etc/ I suppose.
>
> Maybe there would be a clue from output of
>
> cat /proc/cmdline
>
> or
>
> dmesg | grep -i failed
>
> or
>
> journalctl | grep -i failed
>
> posted to the users list. This list seems to have a very small user base.
Well, I use the nVidia drivers packaged by rpmfusion. The nVidia drivers don't use
the /dev/fb0 device.
Have a look in /var/log/Xorg.0.log for error (EE) messages.
--
Fedora Users List - The place to go to speculate endlessly
6 years, 5 months
Fwd: Re: multi-head config question
by François Patte
Le 07/12/2017 à 22:29, Andrew J. Caines a écrit :
> François,
Thank you for this answer
>
>> I have a dual head configuration with an Nvidia graphic card, which
>> perfectly works. but the monitors are standard ones (LG, resolution:
>> 1280x1024) and I would like to add a monitor for treating my photos
>> with darktable.
>
> Have you considered replacing the two small monitors with a bigger,
> higher resolution one? In some markets, the cost of a WQHD (2560x1440)
> or UHD (3840x2160) IPS or AHVA panel has come down a lot recently.
With these high resolution panels, there is a problem with the size of
tools: for instance, I have a resolution of 1280x1024 and it is
sometimes difficult to catch the sliders of darktable tools, I fear that
it will be almost impossible to catch them with a higher resolution.
Once the devellopers will separate the display of the photos from the
tools to manipulate them (like in gimp), I would like to have the tools
on a screen with a reasonable resolution and the photos on another
screen with a higher resolution. But I am wondering if this possible
because, in that case, I need to be able to move the mouse from a screen
to another....
>
> You don't mention what kind of panels you have or want, but as I'm sure
> you know a good panel type is important for colour accuracy.
>
> Another detail you don't mention is which driver you're using: the
> vendor-supplied nvidia driver or nouveau. For the nvidia driver, try the
> "nvidia-settings" application, as it provides much more control over
> your displays and screens.
>
>> I am wondering if I could add another graphic card in order to have
>> a third monitor with an HD resolution (1920x1080 or more) and a
>> specific color profile.
>
> Yes, you can add another video card if you have a free PCI port on your
> motherboard, but for the cost of a second video card and third monitor
> (in both money, space and convenience) there may be better choices.
>
> With a single good quality, high resolution monitor connected to an
> adequate video card you can use an almost unlimited number of workspaces
> to effectively have the whole screen available for as many applications
> as you want.
>
> The colour profiles are managed for each device. Look in "Color" in your
> Settings and you should see each device capable of supporting a profile.
> You will probably see that a profile has been automatically loaded.
>
--
François Patte
UFR de mathématiques et informatique
Laboratoire CNRS MAP5, UMR 8145
Université Paris Descartes
45, rue des Saints Pères
F-75270 Paris Cedex 06
Tél. +33 (0)6 7892 5822
http://www.math-info.univ-paris5.fr/~patte
--
François Patte
UFR de mathématiques et informatique
Laboratoire CNRS MAP5, UMR 8145
Université Paris Descartes
45, rue des Saints Pères
F-75270 Paris Cedex 06
Tél. +33 (0)6 7892 5822
http://www.math-info.univ-paris5.fr/~patte
6 years, 5 months
Re: Data backup- (udev problem)
by Angelo Moreschini
I understand what you say Francis, perhaps you are right, and I'll try your
suggestion.
But first of all I would like fix the basic problem (that the service
doesn't correctly).
All the tray that I can do before to solve this, could be affected from
this "original sin"...
It is not so much material finding for :
*"automount[1214]: setautomntent: lookup(sss): setautomntent: No such file
or directory"*
and I, also, am not able to understand exactly the meaning of this message.
On Sun, Jan 7, 2018 at 10:44 AM, <Francis.Montagnac(a)inria.fr> wrote:
>
> Hi.
>
> On Wed, 27 Dec 2017 11:24:06 +0200 Angelo Moreschini wrote:
> ...
> > The mounting of the partitions for the back up on the USB HD is made
> > permantly at boot of the computer (the name of the backup-partitions is
> > wrote in the file / etc / fstab) :
>
> > UUID=376214F24CC07CE0 /media/BKx_data-personal ntfs defaults 0 0
>
> You are using the UUIDs which is fine: no need thus to configure udev
> to have a fixed device name for those partitions.
>
> > However, this solution for backing up the data is problematic, because *I
> > always receive messages with the request of access to the partitions **
> of
> > the “backup-partitions”** by "nautilus"* - every time that I use the
> "find"
> > command.
>
> I suspect that nautilus is in some manner auditing what resides under
> /media, and unmounting the partitions when not in use.
>
> Can you try to do your mounts under some other directory (ex: /srv)?
>
> --
> francis
> _______________________________________________
> users mailing list -- users(a)lists.fedoraproject.org
> To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
>
6 years, 5 months
Fedora vs. Meltdown & Spectre
by Jonathan Ryshpan
What do people know about Fedora vs. the Meltdown and Spectre bugs?
And should I enable "site isolation" in my browsers?
6 years, 5 months
Feature Request for long links
by Beartooth
Firefox, along with few other browsers, has one valuable feature
that should spread. If you copy a *long* link (like, say, three to five
lines long in an email) into its address bar, it will eliminate the
spaces that come from line ends, and go to the site.
With most other browsers, you have to proofread the pasted URL,
finding and removing the gaps. Irritating, and a waste of time.
No doubt the code to fix those links is internal to Firefox, and
one would have to beg umpteen developers each to adopt it. But need it be?
Could Fedora maybe go into the code, say between any browser and
the networking code that tells the computer to send a link, and insert
something to clean the link before acting on it?
This would be a great boon, especially those of us who surf with
arthritic eyeballs and trifocal fingers.
--
Beartooth Staffwright, Not Quite Clueless Power User
Remember I know little (precious little!) of where up is
6 years, 5 months
!#@$**%^ Firefox
by Beartooth
Running under F27, Ffx 57 puts some accursed Url in its address
box on every new tab. Blasted thin is a royal pain to have to delete
before I can just enter the one I want. How do I turn this excrement off??
--
Beartooth Staffwright, Not Quite Clueless Power User
Remember I know little (precious little!) of where up is.
6 years, 5 months
Data backup- (udev problem)
by Angelo Moreschini
hi,
in order to backing up of the data , I wrote a script that uses the rsync
command.
This script have to be launched manually, and the data are saved on a USB
Hard Disk, which (obviously) must be mounted.
The mounting of the partitions for the back up on the USB HD is made
permantly at boot of the computer (the name of the backup-partitions is
wrote in the file / etc / fstab) :
UUID=376214F24CC07CE0 /media/BKx_data-personal ntfs defaults 0 0
UUID=479F99A324FF4D1D /media/BKx_programming ntfs defaults 0 0
UUID=EA8266EA8266BB29 /media/BKx_data-common ntfs defaults 0 0
This script works fine.
However, this solution for backing up the data is problematic, because *I
always receive messages with the request of access to the partitions ** of
the “backup-partitions”** by "nautilus"* - every time that I use the "find"
command.
I can consider that this problem is connected with the *permanent *
*mounting* of the partitions on the HD-USB (on the file /etc/fstab).
To avoid these problems I actually removed the permanent mounting of the
partitions by registering them on the file fstab and now I'm looking for an
alternative solution for the back up the data.
I think this solution can go in the following directions:
-
mounting the partitions (commanded by the script) before executing the
rsync command and unmounting them immediately afterwards.
-
alternatively, giving appropriate orders to the “udev feature” about the
backup partitions (I think this is possible to do, but I do not know how to
do it).
I would like to have some suggestions and advice about it.
Regards
Angelo
6 years, 5 months
How to get rid of VGACON error
by Dave B(Y)
Good afternoon!
I managed by various means to get my Fedora 26 to run KDE, but it
appears that all is not well...
i) during login, I get
[drm] VGACON disable radeon kernel modesetting (2 times) &
[drm] cannot get speed from usb address (approx)
ii) the system then comes up with the drawing of a river bank & asks for
my password
iii) system then comes up with a KDE Plasma screen, which it then
changes to a different size & then
iv) comes up with a more-or-less KDE start page.
I've had an amount of Trouble to get KDE running (the only live DVD I
have is running Gnome which I prefer not to use) & I'm no longer sure of
what real system I'm running.
I've tried taking the "nomodeset" out of /etc/grub, but that doesn't
appear to do the trick & I haven't been able to find anything else...
Updates are done OK, but it appears that a number of applications are
not listed in the launcher.
Can anyone help me????
Thanks all
Dave
uname -a
Linux Big_Blue_26 4.14.11-200.fc26.x86_64 #1 SMP Wed Jan 3 13:58:53 UTC
2018 x86_64 x86_64 x86_64 GNU/Linux
6 years, 5 months
