Radeon HD6450 causes ethernet failure
by Alex
Hi,
I have an older AMD Phenom II motherboard with a new HD6450 to replace
an older card that failed. While video works fine with this new card,
it somehow causes the ethernet to fail. I've tried the card in the two
different x4 slots that are available, and it doesn't make a
difference.
This is an onboard ethernet controller that was otherwise working
fine. There's just no link light, and while I can configure it
manually with ifconfig, it never detects a link.
I can get it to work temporarily with another ethernet card, but this
was pulled from another machine.
Could this just be a general incompatibility? Or is there perhaps
something I can change? I tried investigating the computer's BIOS and
there really isn't much to change in terms of IRQ assignments or
otherwise.
Since the computer and Linux recognizes it, maybe there's something
more that can be done? Maybe loading a different rtl8169 driver would
work differently?
Here's the info from lspci:
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] Caicos PRO [Radeon HD 7450] (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 809a
Flags: bus master, fast devsel, latency 0, IRQ 3, NUMA node 0
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fdfc0000 (64-bit, non-prefetchable) [size=128K]
I/O ports at ce00 [size=256]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1
Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Kernel modules: radeon
03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Caicos
HDMI Audio [Radeon HD 6450 / 7450/8450/8490 OEM / R5 230/235/235X OEM]
Subsystem: Micro-Star International Co., Ltd. [MSI] Device aa98
Flags: bus master, fast devsel, latency 0, IRQ 26, NUMA node 0
Memory at fdffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1
Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet
Flags: bus master, fast devsel, latency 0, IRQ 17, NUMA node 0
I/O ports at ee00 [size=256]
Memory at fddff000 (64-bit, prefetchable) [size=4K]
Memory at fdde0000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at fde00000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/2 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable+ Count=2 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 12-34-56-78-12-34-56-78
Kernel driver in use: r8169
Kernel modules: r8169
5 years, 7 months
Slow performance when redirecting stdout to an existing disk file
by Dave Ulrick
While debugging a custom program that can write large output files to
stdout, I noticed that the run time as displayed by the Bash 'time' prefix
wildly varied from run to run. It turns out that the issue isn't just with
my program. I can recreate it with 'cat':
$ time cat infile >outfile
If 'infile' is on the order of 140 MB, 'time' might show something as low
as:
real 0m0.146s
user 0m0.000s
sys 0m0.109s
CPU % 74.29
or as high as:
real 0m0.328s
user 0m0.000s
sys 0m0.109s
CPU % 33.31
If 'outfile' doesn't exist, the 'cat' runs much more quickly:
real 0m0.082s
user 0m0.000s
sys 0m0.081s
CPU % 99.77
Likewise, if I arrange to 'rm' the file right before running 'cat', it
runs consistently quickly:
$ time rm -f outfile
real 0m0.019s
user 0m0.000s
sys 0m0.019s
CPU % 99.93
$ time cat infile >outfile
real 0m0.081s
user 0m0.000s
sys 0m0.081s
CPU % 99.75
If I do these two commands in this order over and over, the timings for
'cat' are consistently fast.
In my custom C program, I have the same issue if I write to stdout or if I
'fopen' a named file like this:
fopen(outfile_name, "w")
If the file doesn't exist, the program runs consistently quickly:
real 0m0.191s
user 0m0.082s
sys 0m0.109s
CPU % 99.73
but if it exists the run times fluctuate quite a bit from run to run:
real 0m0.579s
user 0m0.072s
sys 0m0.147s
CPU % 37.85
real 0m0.473s
user 0m0.072s
sys 0m0.148s
CPU % 46.60
If I 'fopen' a named disk file right after doing unlink(outfile_name), I
get consistently fast run times.
Note: I don't think this is an issue with buffered I/O to stdout per se. I
say this because I'm seeing pretty consistent run times if I write to
stdout _as long as the output file didn't previously exist_. Rather, the
issue seems to be with _overwriting_ an existing disk file when I/O
redirection is used.
Are there any known issues with the Linux kernel, 'bash', glibc, or
whatever else might be involved with standard I/O that might cause this
issue? If this is not a known issue, what's the best way to open a bug
ticket?
I'm running Fedora 27 with the latest upgrades. The Linux kernel is
4.18.9-100.fc27.x86_64, glibc is 2.26-30, and bash is 4.4.23-1.
Thanks,
Dave
--
Dave Ulrick
d-ulrick(a)comcast.net
5 years, 7 months
usb mobile
by Patrick Dupre
Hello,
I am a new smart phone.
Bus 001 Device 008: ID 0e8d:2008 MediaTek Inc.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0e8d ProdID=2008 Rev=02.23
S: Manufacturer=Blackview
S: Product=A20Pro
S: SerialNumber=BVA20Pro0008811
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=usbfs
It shows up in the mounted volume
Unknown (application/octet-stream)
volume mtp
and I can navigate.
However, I do not see in
fdisk, or df or mount , or in /run/media (like for a standard key), or in disks
Where is it?
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
5 years, 7 months
network mapper ?
by ToddAndMargo
Hi All,
Anyone have a favorite program that will make a map of
your local network?
Many thanks,
-T
5 years, 7 months
Markdown viewer
by Patrick O'Callaghan
I'm looking for a simple terminal-based viewer for Markdown files. I
*don't* want an editor. Think 'less', not 'emacs'. I don't mind if it
wants to pop up a window to show rich text, but it's not critical.
It seems remarkably* difficult to find such a beast.
poc
* See what I did there?
5 years, 7 months
Turning off LEDs on MSI GM10 gaming mouse
by Robert Moskowitz
I got this mouse for its very light touch. I developed a pinched nerve
and it hurts to mouse...
Pricy for me at $30, but the price of heath?
Anyway I hate the LEDs. I put tape over their big LED, but the roller
has its LED. My search on the web says that the LEDs can be turned of
with the system software. Interestingly enough, my Windows7 system can't...
Fedora 28 and 29-beta do see it:
MSI GM10 MSI GM10 Gaming Mouse as
/devices/platform/soc@1c00000/1c14400.usb/usb2/2-1/2-1.4/2-1.4:1.0/0003:0DB0:0D10.0003/input/input6
hid-generic 0003:0DB0:0D10.0003: input,hidraw2: USB HID v1.11 Mouse [MSI
GM10 MSI GM10 Gaming Mouse] on usb-1c14400.usb-1.4/input0
input: MSI GM10 MSI GM10 Gaming Mouse Keyboard as
/devices/platform/soc@1c00000/1c14400.usb/usb2/2-1/2-1.4/2-1.4:1.1/0003:0DB0:0D10.0004/input/input8
input: MSI GM10 MSI GM10 Gaming Mouse Consumer Control as
/devices/platform/soc@1c00000/1c14400.usb/usb2/2-1/2-1.4/2-1.4:1.1/0003:0DB0:0D10.0004/input/input9
But Xfce mouse settings does not give me any option to turn off the
LEDs. I would be happy with a command line command for this one.
5 years, 7 months
rpmbuild error
by Ranjan Maitra
Hi,
I have not done this for a while, and I was trying to build a small rpm using a previously written .spec file which I had created some time ago and which compiled without incident till F27.
The spec file is at: https://paste.fedoraproject.org/paste/UyRdT3LJxQ5cW21SjBeR9w
The source is available at: https://code.google.com/archive/p/wbar/downloads
So, I get the error:
$ rpmbuild -bb wbar.spec
warning: Macro expanded in comment on line 11: %{name}-%{version}.tar.bz2
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.XYyyfC
+ umask 022
+ cd /home/maitra/rpmbuild/BUILD
+ cd /home/maitra/rpmbuild/BUILD
+ rm -rf wbar-2.3.4
+ /usr/bin/bzip2 -dc /home/maitra/rpmbuild/SOURCES/wbar-2.3.4.tar.bz2
+ /usr/bin/tar -xof -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd wbar-2.3.4
+ /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Am2P0X
+ umask 022
+ cd /home/maitra/rpmbuild/BUILD
+ cd wbar-2.3.4
+ autoreconf -if
aclocal: warning: couldn't open directory 'm4': No such file or directory
src/Makefile.am:18: warning: source file '$(top_srcdir)/src/core/Bar.cc' is in a subdirectory,
src/Makefile.am:18: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/Makefile.am:18: warning: source file '$(top_srcdir)/src/core/Icon.cc' is in a subdirectory,
src/Makefile.am:18: but option 'subdir-objects' is disabled
src/Makefile.am:18: warning: source file '$(top_srcdir)/src/core/Main.cc' is in a subdirectory,
src/Makefile.am:18: but option 'subdir-objects' is disabled
src/Makefile.am:18: warning: source file '$(top_srcdir)/src/core/SuperBar.cc' is in a subdirectory,
src/Makefile.am:18: but option 'subdir-objects' is disabled
src/Makefile.am:18: warning: source file '$(top_srcdir)/src/core/SuperIcon.cc' is in a subdirectory,
src/Makefile.am:18: but option 'subdir-objects' is disabled
src/Makefile.am:18: warning: source file '$(top_srcdir)/src/core/XWin.cc' is in a subdirectory,
src/Makefile.am:18: but option 'subdir-objects' is disabled
src/Makefile.am:43: warning: source file '$(top_srcdir)/src/utils/App.cc' is in a subdirectory,
src/Makefile.am:43: but option 'subdir-objects' is disabled
src/Makefile.am:43: warning: source file '$(top_srcdir)/src/utils/Config.cc' is in a subdirectory,
src/Makefile.am:43: but option 'subdir-objects' is disabled
src/Makefile.am:43: warning: source file '$(top_srcdir)/src/utils/Utils.cc' is in a subdirectory,
src/Makefile.am:43: but option 'subdir-objects' is disabled
src/Makefile.am:43: warning: source file '$(top_srcdir)/src/utils/OptParser.cc' is in a subdirectory,
src/Makefile.am:43: but option 'subdir-objects' is disabled
src/Makefile.am:34: warning: source file '$(top_srcdir)/src/config/Run.cc' is in a subdirectory,
src/Makefile.am:34: but option 'subdir-objects' is disabled
src/Makefile.am:34: warning: source file '$(top_srcdir)/src/config/Functions.cc' is in a subdirectory,
src/Makefile.am:34: but option 'subdir-objects' is disabled
src/Makefile.am:34: warning: source file '$(top_srcdir)/src/config/MainConfig.cc' is in a subdirectory,
src/Makefile.am:34: but option 'subdir-objects' is disabled
+ CFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules'
+ export FFLAGS
+ FCFLAGS='-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -I/usr/lib64/gfortran/modules'
+ export FCFLAGS
+ LDFLAGS='-Wl,-z,relro -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld'
+ export LDFLAGS
+ '[' 1 = 1 ']'
+++ dirname ./configure
++ find . -name config.guess -o -name config.sub
+ '[' 1 = 1 ']'
+ '[' x '!=' 'x-Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' ']'
++ find . -name ltmain.sh
+ ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether UID '1000' is supported by ustar format... yes
checking whether GID '1000' is supported by ustar format... yes
checking how to create a ustar tar archive... gnutar
checking for x86_64-redhat-linux-gnu-g++... no
checking for x86_64-redhat-linux-gnu-c++... no
checking for x86_64-redhat-linux-gnu-gpp... no
checking for x86_64-redhat-linux-gnu-aCC... no
checking for x86_64-redhat-linux-gnu-CC... no
checking for x86_64-redhat-linux-gnu-cxx... no
checking for x86_64-redhat-linux-gnu-cc++... no
checking for x86_64-redhat-linux-gnu-cl.exe... no
checking for x86_64-redhat-linux-gnu-FCC... no
checking for x86_64-redhat-linux-gnu-KCC... no
checking for x86_64-redhat-linux-gnu-RCC... no
checking for x86_64-redhat-linux-gnu-xlC_r... no
checking for x86_64-redhat-linux-gnu-xlC... no
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... none
checking for x86_64-redhat-linux-gnu-gcc... no
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... none
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking whether NLS is requested... yes
checking for intltool-update... /bin/intltool-update
checking for intltool-merge... /bin/intltool-merge
checking for intltool-extract... /bin/intltool-extract
checking for xgettext... /bin/xgettext
checking for msgmerge... /bin/msgmerge
checking for msgfmt... /bin/msgfmt
checking for gmsgfmt... /bin/msgfmt
checking for perl... /bin/perl
checking for perl >= 5.8.1... 5.26.2
checking for XML::Parser... ok
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyCurrent... no
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... (cached) /bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... (cached) /bin/msgfmt
checking for xgettext... (cached) /bin/xgettext
checking for x86_64-redhat-linux-gnu-pkg-config... /bin/x86_64-redhat-linux-gnu-pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for modules... yes
checking for gui_modules... yes
checking for pidof... /bin/pidof
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating share/Makefile
config.status: creating etc/Makefile
config.status: creating etc/wbar.cfg
config.status: creating etc/wbar.desktop.in
config.status: creating pixmaps/Makefile
config.status: creating po/Makefile.in
config.status: creating doc/Makefile
config.status: creating doc/man/Makefile
config.status: creating doc/man/es/Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing default-1 commands
config.status: executing po/stamp-it commands
=======================================
Execute make update-po
es:
.............. done.
110 translated messages.
de:
.............. done.
108 translated messages, 2 untranslated messages.
fi:
.............. done.
33 translated messages, 2 fuzzy translations, 75 untranslated messages.
=======================================
+ make -j4
make all-recursive
make[1]: Entering directory '/home/maitra/rpmbuild/BUILD/wbar-2.3.4'
Making all in src
make[2]: Entering directory '/home/maitra/rpmbuild/BUILD/wbar-2.3.4/src'
g++ -DHAVE_CONFIG_H -I. -I.. -DPACKAGE_LOCALE_DIR=\""/usr/share/locale"\" -DPACKAGE_SRC_DIR=\""."\" -DPACKAGE_DATA_DIR=\""/usr/share"\" -Wall -Wunused -Werror -I../src/utils -I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/fribidi -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/uuid -I/usr/include/harfbuzz -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/atk-1.0 -I/usr/include/libglade-2.0 -pthread -I/usr/include/libxml2 -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -c -o wbar_config-Functions.o `test -f '../src/config/Functions.cc' || echo './'
`../src/config/Functions.cc
In file included from /usr/include/gtk-2.0/gtk/gtk.h:89,
from ../src/config/Functions.h:4,
from ../src/config/Functions.cc:1:
/usr/include/gtk-2.0/gtk/gtkfilechooserbutton.h:59:8: error: unnecessary parentheses in declaration of '__gtk_reserved1' [-Werror=parentheses]
void (*__gtk_reserved1);
^
/usr/include/gtk-2.0/gtk/gtkfilechooserbutton.h:60:8: error: unnecessary parentheses in declaration of '__gtk_reserved2' [-Werror=parentheses]
void (*__gtk_reserved2);
^
/usr/include/gtk-2.0/gtk/gtkfilechooserbutton.h:61:8: error: unnecessary parentheses in declaration of '__gtk_reserved3' [-Werror=parentheses]
void (*__gtk_reserved3);
^
/usr/include/gtk-2.0/gtk/gtkfilechooserbutton.h:62:8: error: unnecessary parentheses in declaration of '__gtk_reserved4' [-Werror=parentheses]
void (*__gtk_reserved4);
^
/usr/include/gtk-2.0/gtk/gtkfilechooserbutton.h:63:8: error: unnecessary parentheses in declaration of '__gtk_reserved5' [-Werror=parentheses]
void (*__gtk_reserved5);
^
/usr/include/gtk-2.0/gtk/gtkfilechooserbutton.h:64:8: error: unnecessary parentheses in declaration of '__gtk_reserved6' [-Werror=parentheses]
void (*__gtk_reserved6);
^
/usr/include/gtk-2.0/gtk/gtkfilechooserbutton.h:65:8: error: unnecessary parentheses in declaration of '__gtk_reserved7' [-Werror=parentheses]
void (*__gtk_reserved7);
^
In file included from /usr/include/gtk-2.0/gtk/gtk.h:173,
from ../src/config/Functions.h:4,
from ../src/config/Functions.cc:1:
/usr/include/gtk-2.0/gtk/gtkstatusicon.h:76:8: error: unnecessary parentheses in declaration of '__gtk_reserved1' [-Werror=parentheses]
void (*__gtk_reserved1);
^
/usr/include/gtk-2.0/gtk/gtkstatusicon.h:77:8: error: unnecessary parentheses in declaration of '__gtk_reserved2' [-Werror=parentheses]
void (*__gtk_reserved2);
^
cc1plus: all warnings being treated as errors
make[2]: *** [Makefile:678: wbar_config-Functions.o] Error 1
make[2]: Leaving directory '/home/maitra/rpmbuild/BUILD/wbar-2.3.4/src'
make[1]: *** [Makefile:405: all-recursive] Error 1
make[1]: Leaving directory '/home/maitra/rpmbuild/BUILD/wbar-2.3.4'
make: *** [Makefile:346: all] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.Am2P0X (%build)
RPM build errors:
Macro expanded in comment on line 11: %{name}-%{version}.tar.bz2
Bad exit status from /var/tmp/rpm-tmp.Am2P0X (%build)
I wonder: what is causing these errors? Line 11 of the file seems to be something else.
I would like to put this rpm up on Fedora if possible.
Many thanks and best wishes,
Ranjan
--
Important Notice: This mailbox is ignored: e-mails are set to be deleted on receipt. Please respond to the mailing list if appropriate. For those needing to send personal or professional e-mail, please use appropriate addresses.
5 years, 7 months
test package
by Patrick Dupre
Hello,
How to install a testing update package?
Thank
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
5 years, 7 months
Eclipse's market place @F29
by lejeczek
hi guys
if use Eclipse - does its market place work for you?
Mine crashes at invocation.
thanks, L.
5 years, 7 months
USB/Flash Drive backup strategies
by Max Pyziur
Greetings,
The handful of my Linux machines are backed-up via rsync and cron
(hourly) to a dedicated machine.
I use several USB/Flash drives for dedicated work that requires using them
both on my Linux laptops and on other OSs (Windows and Mac).
I'd like to somehow back these up to the dedicated machine; has anyone
devised a method to do something like this?
Thanks in advance,
Max Pyziur
pyz(a)brama.com
5 years, 7 months
