david walcroft kirjoitti viestissään (lähetysaika sunnuntai, 25. syyskuuta 2005 00:37):
# If the UPS is locally attached set it to "yes" SERVER=yes # Model of the UPS (filename to call for it, without path) # Example - one of # apcsmart - APC SMartUPS and similar # fentonups - Fenton UPS # optiups # bestups # genericups # ups-trust425+625 # upsdrvctl # You MUST change this, or set SERVER to "no" # To support multiple drivers, set MODEL=upsdrvctl MODEL=Powermate-3105
The "MODEL" parameter does _not_ mean the actual model of your ups, you must set it to the nut driver used for your UPS (or "upsdrvctl").
# UPS device - needed if UPS is locally attached DEVICE=/dev/ttyS0
Wasn't your UPS connected through USB, not the serial port?