List members,
I am receiving some boot messages on my Fedora Core 3 machine that concern me and I would like your help in identifying whether they are actual problems or if they can be safely ignored. I captured the messages by using 'Shift+Page Up' to page through the scroll buffer prior to logging in and typing what I saw into an editor on another machine. I looked for a way to capture these boot messages to file, but I couldn't find one. Does anyone know of a way to do this?
================================================== Booting 'Fedora Core (2.6.12-1.1376_FC3smp)' kernel direct mapping tables upto ffff810100000000 @8000-c000 root (hd0,1) Filesystem type is ext2fs, partition type 0x83 kernel /vmlinuz-2.6.12-1.1376_FC3smp ro root=LABEL=/ quiet [Linux-bzImage, setup=0x1e00, size=0x1a57fa] initrd /initrd-2.6.12-1.1376_FC3smp.img [Linux-initrd @ 0x37f07000, 0xe81c0 bytes]
. Decompressing Linux...done. Booting the kernel. Red Hat nash version 4.1.18.1 starting sda: asking for cache data failed sda: assuming drive cache: write through sda: asking for cache data failed sda: assuming drive cache: write through INIT: version 2.85 booting Setting default font (latarcyrheb-sun16): [ OK ]
Welcome to Fedora Core Press 'I' to enter interactive startup. Starting udev: [ OK ] Initializing hardware... storage network audio done [ OK ] Configuring kernel parameters: [ OK ] Setting clock (utc): Thu Nov 3 10:47:11 EST 2005 [ OK ] Loading default keymap (us): [ OK ] Setting hostname immlx16.imm1: [ OK ] Checking root filesystem /: clean, 28314/656000 files, 120710/1311297 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Setting up Logical Volume Management: [ OK ] Checking filesystems /boot: clean, 40/32256 files, 20415/128520 blocks /home: clean, 27/656000 files, 31389/1311297 blocks /usr: clean, 179268/1310720 files, 1154593/2620595 blocks /var: clean, 3815/6045696 files, 745141/12080872 blocks [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Starting sysstat: [ OK ] Starting etherfabric [ OK ] Checking for new hardware [ OK ] Starting pcmcia: [ OK ] Setting network parameters: [ OK ] Bringing up loopback interface: [ OK ] Bringing up eth2: [ OK ] Bringing up eth3: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting irqbalance: [ OK ] Starting portmap: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: [ OK ] Mounting NFS filesystems: mount to NFS server 'XXX.XXX.XX.XX' failed: server is down. [FAILED] Mounting other filesystems: [ OK ] Starting lm_sensors: [ OK ] Starting automount: No Mountpoints Defined [ OK ] Starting nifd... Starting mDNSResponder... [ OK ] Starting smartd: [FAILED] Starting acpi daemon: [ OK ] Starting cups: [ OK ] Starting sshd: [ OK ] ip_tables: (C) 2000-2002 Netfilter core team Starting xinetd: [ OK ] Starting NFS services: [ OK ] Starting NFS quotas: [ OK ] Starting NFS daemon: [ OK ] Starting NFS mountd: [ OK ] Starting vsftpd for vsftpd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: [ OK ] /etc/rc3.d/S90crond: line 13: /usr/local/bin/rename.ps.info.log: No such file or directory Starting crond: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] Starting system message bus: [ OK ] Starting cups-config-daemon: [ OK ] Starting haldaemon: [ OK ] ==================================================
The messages that concern me are:
========== sda: asking for cache data failed sda: assuming drive cache: write through sda: asking for cache data failed sda: assuming drive cache: write through ---------- I have no idea what these mean, but they don't seem to cause any problems with the operation of the machine. Can they be safely ignored or should I try to resolve them (and if so, how)? ========== Mounting NFS filesystems: mount to NFS server 'XXX.XXX.XX.XX' failed: server is down. [FAILED] ---------- This is a strange one. The server (IP hidden for security) is up and manually mounting it succeeds immediately after logging in. The mount succeeds during boot about 5% of the time. Does anyone know what could be causing it to fail the vast majority of the time? ========== Starting smartd: [FAILED] ---------- Are there common causes for smartd failures? Should I just turn it off or should I attempt to fix the configuration? The contents of my smartd.conf file are as follows:
[root@immlx16 ~]# cat /etc/smartd.conf /dev/sda -H -m root@localhost.localdomain ========== /etc/rc3.d/S90crond: line 13: /usr/local/bin/rename.ps.info.log: No such file or directory Starting crond: [ OK ] ---------- A script was missing and this problem has been resolved. ==========
If you need any more information to help me with a particular problem, please don't hesitate to ask. I will be happy to provide it.
Thank you for your time,
Matthew Roth InterMedia Marketing Systems Software Engineer and Systems Developer
On Thu, Nov 03, 2005 at 02:32:50PM -0500, Matt Roth wrote:
List members,
I am receiving some boot messages on my Fedora Core 3 machine that concern me and I would like your help in identifying whether they are actual problems or if they can be safely ignored. I captured the messages by using 'Shift+Page Up' to page through the scroll buffer prior to logging in and typing what I saw into an editor on another machine. I looked for a way to capture these boot messages to file, but I couldn't find one. Does anyone know of a way to do this?
get a hold of: system-logviewer-0.9.11-1 which was left out of FC4 but is in FC3. Also look in: /var/log/boot.log demsg will also list boot messages after you boot but has a limited buffer.
I have seen those cache messages before but don't know what they mean and have ignored them May be a mistake. I guess these are SATA drives. If they are your SATA configuration in the BIOS may be in error.
Does your NFS server respond immediately after you finish booting.If not there may be a response timeout occurring. You do have nfs and nfslock running on you server?
smartd failures ususally come from misconfiguration of the conf file.
================================================== Booting 'Fedora Core (2.6.12-1.1376_FC3smp)' kernel direct mapping tables upto ffff810100000000 @8000-c000 root (hd0,1) Filesystem type is ext2fs, partition type 0x83 kernel /vmlinuz-2.6.12-1.1376_FC3smp ro root=LABEL=/ quiet [Linux-bzImage, setup=0x1e00, size=0x1a57fa] initrd /initrd-2.6.12-1.1376_FC3smp.img [Linux-initrd @ 0x37f07000, 0xe81c0 bytes]
. Decompressing Linux...done. Booting the kernel. Red Hat nash version 4.1.18.1 starting sda: asking for cache data failed sda: assuming drive cache: write through sda: asking for cache data failed sda: assuming drive cache: write through INIT: version 2.85 booting Setting default font (latarcyrheb-sun16): [ OK ]
Welcome to Fedora Core Press 'I' to enter interactive startup.Starting udev: [ OK ] Initializing hardware... storage network audio done [ OK ] Configuring kernel parameters: [ OK ] Setting clock (utc): Thu Nov 3 10:47:11 EST 2005 [ OK ] Loading default keymap (us): [ OK ] Setting hostname immlx16.imm1: [ OK ] Checking root filesystem /: clean, 28314/656000 files, 120710/1311297 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Setting up Logical Volume Management: [ OK ] Checking filesystems /boot: clean, 40/32256 files, 20415/128520 blocks /home: clean, 27/656000 files, 31389/1311297 blocks /usr: clean, 179268/1310720 files, 1154593/2620595 blocks /var: clean, 3815/6045696 files, 745141/12080872 blocks [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Starting sysstat: [ OK ] Starting etherfabric [ OK ] Checking for new hardware [ OK ] Starting pcmcia: [ OK ] Setting network parameters: [ OK ] Bringing up loopback interface: [ OK ] Bringing up eth2: [ OK ] Bringing up eth3: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting irqbalance: [ OK ] Starting portmap: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: [ OK ] Mounting NFS filesystems: mount to NFS server 'XXX.XXX.XX.XX' failed: server is down. [FAILED] Mounting other filesystems: [ OK ] Starting lm_sensors: [ OK ] Starting automount: No Mountpoints Defined [ OK ] Starting nifd... Starting mDNSResponder... [ OK ] Starting smartd: [FAILED] Starting acpi daemon: [ OK ] Starting cups: [ OK ] Starting sshd: [ OK ] ip_tables: (C) 2000-2002 Netfilter core team Starting xinetd: [ OK ] Starting NFS services: [ OK ] Starting NFS quotas: [ OK ] Starting NFS daemon: [ OK ] Starting NFS mountd: [ OK ] Starting vsftpd for vsftpd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: [ OK ] /etc/rc3.d/S90crond: line 13: /usr/local/bin/rename.ps.info.log: No such file or directory Starting crond: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] Starting system message bus: [ OK ] Starting cups-config-daemon: [ OK ] Starting haldaemon: [ OK ] ==================================================
The messages that concern me are:
========== sda: asking for cache data failed sda: assuming drive cache: write through sda: asking for cache data failed sda: assuming drive cache: write through
I have no idea what these mean, but they don't seem to cause any problems with the operation of the machine. Can they be safely ignored or should I try to resolve them (and if so, how)? ========== Mounting NFS filesystems: mount to NFS server 'XXX.XXX.XX.XX' failed: server is down. [FAILED]
This is a strange one. The server (IP hidden for security) is up and manually mounting it succeeds immediately after logging in. The mount succeeds during boot about 5% of the time. Does anyone know what could be causing it to fail the vast majority of the time? ========== Starting smartd: [FAILED]
Are there common causes for smartd failures? Should I just turn it off or should I attempt to fix the configuration? The contents of my smartd.conf file are as follows:
[root@immlx16 ~]# cat /etc/smartd.conf /dev/sda -H -m root@localhost.localdomain ========== /etc/rc3.d/S90crond: line 13: /usr/local/bin/rename.ps.info.log: No such file or directory Starting crond: [ OK ]
A script was missing and this problem has been resolved.
If you need any more information to help me with a particular problem, please don't hesitate to ask. I will be happy to provide it.
Thank you for your time,
Matthew Roth InterMedia Marketing Systems Software Engineer and Systems Developer
-- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
-
akonstam＠trinity.edu -
Matthew J. Roth