Fedora 38: Video ATI Radeon HD 6400M/7400M low resolution after
update from Fedora 35
by Dario Lesca
On my notebook[1] I have update from Fedora 35 to Fedora 37, then to
Fedora 38.
Now If I start with last Fedora 38 kernel (6.3.11-200.fc38.x86_64) the
system start without fully graphical boot and monitor is set to low
resolution 1024x768 (4:3) instead of the usual 1366x768 (16:9).
If I start with old kerner 5.17.5-200.fc35.x86_64 all work fine.
I have check the initrd of two kernel and I have noticed that into
kernel 6.X the radeon (and also amdgpu) firmware is missing
[root@fedora initrd-5]# lsinitrd -k 5.17.5-200.fc35.x86_64|grep radeon
drwxr-xr-x 2 root root 0 Oct 28 2021 usr/lib/firmware/radeon
...............................................................................
-rw-r--r-- 1 root root 21468 Oct 28 2021 usr/lib/firmware/radeon/VERDE_smc.bin.xz
drwxr-xr-x 2 root root 0 Oct 28 2021 usr/lib/modules/5.17.5-200.fc35.x86_64/kernel/drivers/gpu/drm/radeon
-rw-r--r-- 1 root root 592964 Oct 28 2021 usr/lib/modules/5.17.5-200.fc35.x86_64/kernel/drivers/gpu/drm/radeon/radeon.ko.xz
[root@fedora initrd-5]# lsinitrd -k 6.3.11-200.fc38.x86_64|grep radeon
drwxr-xr-x 2 root root 0 Apr 27 02:00 usr/lib/modules/6.3.11-200.fc38.x86_64/kernel/drivers/gpu/drm/radeon
-rw-r--r-- 1 root root 666892 Apr 27 02:00 usr/lib/modules/6.3.11-200.fc38.x86_64/kernel/drivers/gpu/drm/radeon/radeon.ko.xz
[root@fedora initrd-5]# ls ../initrd-*/usr/lib/firmware/
../initrd-5/usr/lib/firmware/:
amdgpu cis radeon
../initrd-6/usr/lib/firmware/:
cis
How to I can resolve my problem?
Why the firmware is missing?
Many thanks for help
Dario
[1]
[root@fedora initrd-5]# DISPLAY= inxi -SGaz
System:
Kernel: 5.17.5-200.fc35.x86_64 arch: x86_64 bits: 64 compiler: gcc v: 2.37-10.fc35
parameters: BOOT_IMAGE=(hd0,msdos1)/f9c6018290c14d36a6c3ccae0374bbba/5.17.5-200.fc35.x86_64/linux
root=/dev/mapper/fedora_danila--fedora-root ro rd.lvm.lv=fedora_danila-fedora/root
rd.lvm.lv=fedora_danila-fedora/swap rhgb quiet LANG=it_IT.UTF-8
Console: pty pts/2 DM: GDM v: 44.1 Distro: Fedora release 38 (Thirty Eight)
Graphics:
Device-1: AMD Seymour [Radeon HD 6400M/7400M Series] vendor: ASUSTeK driver: radeon v: kernel
alternate: amdgpu arch: TeraScale-2 code: Evergreen process: TSMC 32-40nm built: 2009-15 pcie:
gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 2 speed: 5 GT/s ports: active: LVDS-1
empty: HDMI-A-1,VGA-1 bus-ID: 01:00.0 chip-ID: 1002:6760 class-ID: 0300 temp: 54.5 C
Device-2: Alcor Micro Asus Integrated Webcam driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-1.2:4 chip-ID: 058f:a014 class-ID: 0e02
Display: server: X.org v: 1.20.14 with: Xwayland v: 22.1.9 compositor: gnome-shell driver: X:
loaded: radeon unloaded: fbdev,modesetting,vesa dri: r600 gpu: radeon display-ID: tty: 190x45
Monitor-1: LVDS-1 size-res: N/A in console modes: max: 1366x768 min: 640x480
API: OpenGL Message: GL data unavailable in console for root.
--
Dario Lesca
(Inviato dal mio Linux Fedora 38 Workstation)
10 months, 4 weeks
qemu-kvm: monolithic or modular?
by ToddAndMargo
Fedora 38
Is the version of qemu-kvm in the Fedora
repo using monolithic or modular daemons?
Many thanks,
-T
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Computers are like air conditioners.
They malfunction when you open windows
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
10 months, 4 weeks
comparing group lists
by Bill Cunningham
Is there a way to use dnf or rpm to compare the listing of groups. For
example, in my case I use "minimal install" or the "Fedora Server
Edition" install. If I wanted to compare these two groups and the rpms
that are in each, how would I do that?
B
10 months, 4 weeks
LIBVIRT_PRIVATE missing
by ToddAndMargo
Hi All,
Fedora 38
libvirt-daemon-9.0.0-3.fc38.x86_64
Anyone know how to fix this?
# libvirtd --deamon
libvirtd: /lib64/libvirt.so.0: version `LIBVIRT_PRIVATE_9.0.0' not found
(required by libvirtd)
I have reinstalled libvirt-daemon. No joy.
Many thanks,
-T
10 months, 4 weeks
Video Display Freezes - Radeon GPU Lockup
by David Dembrow
Recently my video display freezes after a few minutes. The video card
is an ATI Radeon dual head. Is there some configuration settings
available that may work around whatever my failure may be?
The only hint I have about the failure is from the dmesg command I can
reach through one of the virtual consoles because of course the
graphical video is frozen. I am including the last failure messages below.
[ 3132.242076] radeon 0000:01:00.0: ring 0 stalled for more than 10437msec
[ 3132.242086] radeon 0000:01:00.0: GPU lockup (current fence id
0x000000000000c85a last fence id 0x0000000000
00c9c4 on ring 0)
[ 3132.242104] radeon 0000:01:00.0: failed to get a new IB (-35)
[ 3132.242107] [drm:radeon_cs_ioctl [radeon]] *ERROR* Failed to get ib !
[ 3132.249332] radeon 0000:01:00.0: Saved 11577 dwords of commands on
ring 0.
[ 3132.249341] radeon 0000:01:00.0: GPU softreset: 0x00000009
[ 3132.249343] radeon 0000:01:00.0: R_008010_GRBM_STATUS =
0xE7730030
[ 3132.249345] radeon 0000:01:00.0: R_008014_GRBM_STATUS2 =
0x00110103
[ 3132.249347] radeon 0000:01:00.0: R_000E50_SRBM_STATUS =
0x200000C0
[ 3132.249349] radeon 0000:01:00.0: R_008674_CP_STALLED_STAT1 =
0x00000000
[3132.249351]radeon 0000:01:00.0: R_008678_CP_STALLED_STAT2 = 0x00008002
[ 3132.249353] radeon 0000:01:00.0: R_00867C_CP_BUSY_STAT =
0x00008086
[ 3132.249354] radeon 0000:01:00.0: R_008680_CP_STAT =
0x80018645
[ 3132.249356] radeon 0000:01:00.0: R_00D034_DMA_STATUS_REG =
0x44C83D57
[ 3132.312011] radeon 0000:01:00.0: R_008020_GRBM_SOFT_RESET=0x00007FEF
[ 3132.312065] radeon 0000:01:00.0: SRBM_SOFT_RESET=0x00000100
[ 3132.314169] radeon 0000:01:00.0: R_008010_GRBM_STATUS =
0xA0003030
[ 3132.314171] radeon 0000:01:00.0: R_008014_GRBM_STATUS2 =
0x00000003
[ 3132.314173] radeon 0000:01:00.0: R_000E50_SRBM_STATUS =
0x200080C0
[ 3132.314175] radeon 0000:01:00.0: R_008674_CP_STALLED_STAT1 =
0x00000000
[ 3132.314176] radeon 0000:01:00.0: R_008678_CP_STALLED_STAT2 =
0x00000000
[ 3132.314178] radeon 0000:01:00.0: R_00867C_CP_BUSY_STAT =
0x00000000
[ 3132.314180] radeon 0000:01:00.0: R_008680_CP_STAT =
0x80100000
[ 3132.314182] radeon 0000:01:00.0: R_00D034_DMA_STATUS_REG =
0x44C83D57
[ 3132.314188] radeon 0000:01:00.0: GPU reset succeeded, trying to resume
[3132.329989][drm] PCIE gen 2 link speeds already enabled
[ 3132.332766] [drm] PCIE GART of 512M enabled (table at
0x0000000000142000).
[ 3132.332780] radeon 0000:01:00.0: WB enabled
[ 3132.332782] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr
0x0000000010000c00
[ 3132.333095] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr
0x00000000000521d0
[ 3132.333236] debugfs: File 'radeon_ring_gfx' in directory '0' already
present!
[ 3132.364403] [drm] ring test on 0 succeeded in 1 usecs
[ 3132.364411] debugfs: File 'radeon_ring_uvd' in directory '0' already
present!
[ 3132.540432] [drm] ring test on 5 succeeded in 1 usecs
[ 3132.540441] [drm] UVD initialized successfully.
[ 3142.826088] radeon 0000:01:00.0: ring 0 stalled for more than 10286msec
[ 3142.826098] radeon 0000:01:00.0: GPU lockup (current fence id
0x000000000000c85d last fence id 0x0000000000
00c9c4 on ring 0)
[ 3142.829928] [drm:r600_ib_test [radeon]] *ERROR* radeon: fence wait
failed (-35).
[3142.830060][drm:radeon_ib_ring_tests [radeon]] *ERROR* radeon: failed
testing IB on GFX ring (-35).
10 months, 4 weeks
How do I remove expired signatures?
by ToddAndMargo
Fedora 38
$ rpm -qa
...
:error: Verifying a signature using certificate
09E55FAF4F7862CD6D558997CDFB5FA52007B954 (Metasploit
<metasploit(a)rapid7.com>):
1. Certificiate CDFB5FA52007B954 invalid: certificate is not alive
because: The primary key is not live
because: Expired on 2019-09-02T13:04:52Z
2. Key CDFB5FA52007B954 invalid: key is not alive
because: The primary key is not live
because: Expired on 2019-09-02T13:04:52Z
error: Verifying a signature using certificate
E64C7A04DC653D07ACA3EA585E62D791625A271E (home:hawkeye116477 OBS Project
<home:hawkeye116477@build.opensuse.org>):
1. Certificiate 5E62D791625A271E invalid: certificate is not alive
because: The primary key is not live
because: Expired on 2021-02-27T20:48:15Z
2. Key 5E62D791625A271E invalid: key is not alive
because: The primary key is not live
because: Expired on 2021-02-27T20:48:15Z
Both of the programs associated have been removed,
but the signatures stayed.
How do I rid myself of these expired signatures?
Many thanks,
-T
10 months, 4 weeks
How do I get rid of this fc36 package?
by ToddAndMargo
Fedora 38
How do I get rid of this fc36 package?
# dnf remove openni-1.5.7.10-26.fc36.x86_64
Dependencies resolved.
================================================================================
Package Architecture Version Repository
Size
================================================================================
Removing:
openni x86_64 1.5.7.10-26.fc36 @@System
1.3 M
Transaction Summary
================================================================================
Remove 1 Package
Freed space: 1.3 M
Is this ok [y/N]: y
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing :
1/1
Running scriptlet: openni-1.5.7.10-26.fc36.x86_64
1/1
/var/tmp/rpm-tmp.zVmxL1: line 2: niReg: command not found
/var/tmp/rpm-tmp.zVmxL1: line 3: niReg: command not found
/var/tmp/rpm-tmp.zVmxL1: line 4: niReg: command not found
error: %preun(openni-1.5.7.10-26.fc36.x86_64) scriptlet failed, exit
status 127
Error in PREUN scriptlet in rpm package openni
Verifying : openni-1.5.7.10-26.fc36.x86_64
1/1
Failed:
openni-1.5.7.10-26.fc36.x86_64
Error: Transaction failed
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Computers are like air conditioners.
They malfunction when you open windows
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
10 months, 4 weeks
rpm qa signatures
by ToddAndMargo
Hi All,
I just upgraded to Fedora 38.
When I went to ask "rpm" what my version of
Xfce was, I got a ton of this scrolling
over my terminal:
$ rpm -qa xfce4\*
...
error: Verifying a signature using certificate
555FD53A996BB0E1029F7AF2AFF47E8B2A31FBDF (@virtmaint-sig_virt-preview
(None) <@virtmaint-sig#virt-preview(a)copr.fedorahosted.org>):
1. Certificiate AFF47E8B2A31FBDF invalid: certificate is not alive
because: The primary key is not live
because: Expired on 2023-04-16T14:42:35Z
2. Key AFF47E8B2A31FBDF invalid: key is not alive
because: The primary key is not live
because: Expired on 2023-04-16T14:42:35Z
What the heck?
-T
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Computers are like air conditioners.
They malfunction when you open windows
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
11 months
Gui for fstab?
by ToddAndMargo
HI All,
Is there a GUI for settin up a new
drive in fstab? Or do we still need to
use to old one (vi)?
Many thanks,
-T
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Having been erased,
The document you're seeking
Must now be retyped.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
11 months