Ubuntu Install
by dj faké
don't know if this will get me "banned" from the fedora-ppc list, but I
did an install of (K)Ubuntu today and it was the easiest linux
installation I've ever done: download one (1) iso image, burn it do
disc, boot off of it, type "install", accept the prompts (for the most
part), and within 20 minutes I had a dual-boot configured and running on
my Mini.
c
19 years
Re: FC3 PPC development tree / installing FC3 on B&W PowerMacG3
by Patrik Jonsson
Hi everyone,
I've just started trying to install fc3 on my old PowerCenterPro. I've
got the installer starting using BootX, but then I get to a similar
problem as was reported here back in november:
>but at the PowerMacG3 -- which should work with the bmac driver -- there I
>don't i cannot get the network connection to work even when i mannually
>select the driver. The automatic detection doesn't work at all.
>
>>/ > but with the bmac driver. alt Alt+F4 it says:
>/>/ > <7> divert: allocating divert_blk for eth0
>/>/ > <6> eth0: BMAC+ at 00:05:02:61:a3:51
>/>/ > so i guess anaconda could load the driver. but it doesn't go further
>/>/ > then. It just keeps me asking to select a driver...
>/>/
>/>/ Ah ok this is a bug, I've not been able to track down yet.
>/
>
>
My problem is exactly the same, except it's for the mace eth driver.
When I try to load the driver, I get:
/<7> divert: allocating divert_blk for eth0
//6> eth0: MACE at 00:05:9a:a0:51:88, chip revision 9.64
/
But the installer keeps asking for a driver. This is with the "fixed"
installer at ftp://ftp.uk.linux.org/pub/linux/fedora-ppc/fc3-ppc/, so I
was hoping it would work. Was it fixed only for the bmac driver?
So my net install is dead in the water at that point. Another problem is
that the onboard scsi (53c94) isn't recognized. I have to hook my drives
up to the aic7xxx card for the installer to see them. Any ideas about
this? This isn't necessarily a huge problem since I can hook the drives
up to the card during the install, assuming I can get 53c94 to work for
the actual OS.
Finally, there are weird video artifacts in the installer, like garbled
columns going down the screen. In these columns, pixels are flickering
rapidly and seem to be a copy of the column 5 chars to the right... I've
seen some emails about this being broken somewhere in the 2.6 kernels,
but no solution. I then tried to boot using my voodoo3 card using
"video=tdfx", but then I don't get past the first "pmac_init" screen.
Any ideas here? Does the installer kernel simply lack drivers for tdfx
and 53c94?
Any hints would be much appreciated.
/Patrik Jonsson
19 years
Apple wide LCD
by Roland McGrath
Anyone using FC4/rawhide X with an "Apple Cinema Display 20-inch
widescreen" connected by DVI to the Radeon 9600 that came in the G5?
It's all wonky. aI copied some xorg.conf magic from a YellowDog install
that works, which makes it manage the aspect ratio, but I think at low
resolution. The colors are way, way off.
Also, what about console (non-X) screenblanking for the LCD? It sits there
all night with the backlight on. Is the support to control this missing?
Thanks,
Roland
19 years
yum vs ppc64
by Roland McGrath
I did an install on a G5 from the rawhide "ppc" distribution, which was fine.
(I hit the kernel-smp problem but got around that.)
However, now when I try "yum upgrade", it goes around looking for ppc64
repositories and trying to replace everything with the ppc64 packages. I
assume that this is not what I really want. I would expect yum to upgrade
to the latest flavor of the same stuff I got from doing the install.
What do other people with ppc64 machines do to update?
Thanks,
Roland
19 years
Re: fedora 4 test 2 on ppc (dual proc g5)
by Colin Charles
On Thu, 2005-04-21 at 13:04 -0400, Joe.Hoot(a)itec.suny.edu wrote:
>
> I just downloaded the fedora core test2 for ppc. I rebooted my PPC
> Dual G5. I was prompted by yaboot and hit enter to except the default
> kernel "linux." The kernel starts to load and then dies. I shutdown
> the machine and started it back up and at yaboot, typed linux nofb.
> It started to load again and then died again. Here is the output
> when it stops booting:
Wrong list, fedora-test-list is where this should go
> opening display /pci@0,fd000000/NVDA,Parent@10/NVDA,Display-B@1... ok
> copying 0F device tree...done
> starting cpu /cpus/PowerPC,G5...failed: 0000000
Don't have a g5, but that surely looks wrong
> Initializing fake screen: NVDA,Display-A
> Calling quiesce ...
> returning 0x01400000 from prom_init
>
> Invalid memory access at SRR0: 00000000.01403b7c SRR1:
> 10000000.000083030
> Any suggestions? Is this a problem with dual proc g5's? Is there any
> way to disable SMP with a kernel parameter that can be passwed?
max_cpus=1 might work. In fact, whats in there might actually be a
uniprocessor kernel, because there was a bug (or still is a bug) in
relation to the installation
So hit tab, and don't boot into linux (there should be another kernel there, its just not the default)
--
Colin Charles, byte(a)aeon.com.my
http://www.bytebot.net/
"First they ignore you, then they laugh at you, then they fight you,
then you win." -- Mohandas Gandhi
19 years
Accessing OSX volume through FC4
by Paul Cieslar
Hi. I am dual booting panther and FC4 test 2, but am unable to access
any files under the panther install. I have tried the mount command, I
have also tried using hfsutils. Below is the output:
--
[paulc]# hfs
hfsutils version 3.2.6 - Copyright (C) 1996-1998 Robert Leslie
This is free software but comes with ABSOLUTELY NO WARRANTY.
Type `license' for details.
hfs> hmount /dev/hda10
Volume name is "osx" (locked)
Volume was created on Sun 03 Apr 2005 05:50:28 PM BST
Volume was last modified on Sun 03 Apr 2005 05:50:28 PM BST
Volume has 0 bytes free
hfs> dir
fi BTFL/DMGR 0 327680 03 Apr 2005 50:28 Desktop DB
fi DTFL/DMGR 0 0 03 Apr 2005 50:28 Desktop DF
fi FNDR/MACS 0 0 03 Apr 2005 50:28 Finder
f ttro/ttxt 0 1781 03 Apr 2005 50:28 ReadMe
fi zsys/MACS 22233 0 03 Apr 2005 50:28 System
hfs> hcd Desktop\ DB
Error: not a directory
hfs>
--
Any advice would be appreciate.
Thanks.
Paul C
19 years
How can I convert my debian machine to Fedora?
by Ken Young
Hi,
I'm trying to get Fedora running on an MVME 2700 single board computer.
This little board has a 750 PowerPC processor. I've got Debian 3.1
running happily atop the 2.6.11.7 kernel. It runs like a champ, but I'd
like to try running Fedora instead of Debian. This single board computer
(we've actually got ~35 of them) has no CDROM drive, and I had to do
quite a bit of horsing around with the kernel configuration to get it
to boot anyway (via NFS), so there's no way for me to just boot off of the
iso image CDROMs and install Fedora normally. Is there any way I can
install from the CDROM images (which, of course, I can mount
with the "-o loop" option) without booting from the CDROMs? Is
there a script somewhere that will install a minimal set of RPMs
somewhere in my files system, so that I can later mount that area as root?
Is there any way to do a network install without first booting off a
CDROM?
Thanks for any info!
Ken Young
Smithsonian Astrophysical Observatory
60 Garden Street, MS 78
Phoney Dolson has a secret name. Cambridge, MA 02138 USA
(617) 495-7330
kyoung(a)cfa.harvard.edu
19 years
solution - getting a dial-up modem on a PowerMacs to work
by Justin Kelly
Hi All
As some of you will know I've been trying for a while now to get my
dial-up modem working on Fedora 4 test 2 and CentOS 4 beta 2.
I finally have some good news :)
On Cent and Fedora PPC i had exactly the same issue, my modem wasn't
being detected, in wvdial I was getting input/output errors
(http://forums.fedoraforum.org/showthread.php?t=52183)
my solution - install the latest yellowdog kernel on centos-ppc/fedora
I downloaded the latest ydl kernel (2.6.10-1.ydl.1) from
http://mirror.pacific.net.au/linux/yellowdog/updates/yellowdog-4.0/ppc/,
installed it. modified /etc/yaboot.conf and /etc/modprobe.conf(see
below) and now dial-up and sound work perfect :)
Im sure this is not everyones preferred method, but it works.
this solution is working for me on centos-ppc, i tried this method on
fedora4test2 but had issues as the installed kernel is newer than the
ydl one, but im sure it'll probably work on fedora 3
>From what i cant see of the ydl kernel the only main difference when
it comes to modems it that it has Macserial compiled in the kernel by
default where as fedora doesn't. If possible I would suggest this be
compiled in the fedora kernel as well, im no kernel expert, i just
wont dial-up to 'just work'.
Now i just gotta get X working all nice and i'll be very happy.
hint: if anyone else tries this remeber use rpm -ivh and not rpm -uvh
to install the kernel, took me a few re-installs for me to learn this
lesson :)
Cheers
Justin Kelly
______________________________
/etc/modprobe.conf
______________________________
alias eth0 sungem
alias usb-controller ohci-hcd
#ALSA portion
alias char-major-116* snd
alias snd-card-0 snd_powermac
#OSS/Free portion
alias char-major-14* soundcore
alias sound-slot-0 snd-card-0
# card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
install snd-card-0 /sbin/modprobe ~@~Signore-install snd-card-0 && {
/usr/sbin/aslsactl restore >/dev/null 2>&1 || :; }
remove snd-card-0 { /usr/sbin/alsactl store >/dev/null 2>&1 || :; };
/sbin/modprobe -r ~@~Signore-remove
install sound-slot-0 /sbin/modporbe ~@~Signore-install sound-slot-0 &&
{ /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 22>&1 || :; }
remove sound-slot-0 { /sbin/modprobe -f /etc/.aumixrc -S >>/dev/null
2>&1 || :; }; /sbin/modprobe -r ~@~Signore-remove ~
19 years, 1 month
X won't work after an F3 install
by richard
I have installed Fedora 3 on a G3 iBook (late 2002), but none of the
graphical interfaces will work properly.
When I log into GNOME as root, I get the following messages: "There was
an error starting the GNOME Settings Daemon. Some things, such as
themes, sounds, or background settings may not work correctly. The
Settings Daemon restarted too many times. GNOME will still try to
restart the Settings Daemon next time you log in." Also: "Nautilus
can't be used now, due to an unexpected error from Bonobo when
attempting to locate the factory." And "There was a problem registering
the panel with the bonobo-activation server. The error code is 3. The
panel will now exit."
When I log in as non-privileged user ("rs") the session is terminated
immediately with the messages:
"/etc/X11/gdm/PreSession/Default: Registering your session with wtmp and
utmp
/etc/X11/gdm/PreSession/Default: running: /usr/bin/X11/sessreg -a -w
/var/log/wtmp -u /var/run/utmp -x "/var/gdm/:0.Xservers" -h "" -1 ":0"
"rs" Agent pid 6646
(gnome-session:6621): libgnomevfs-WARNING * *: Unable to create ~/.gnome
directory: Permission denied. Could not create per-user gnome
configuration directory '/home/rs/.gnome2/': Permission denied
Earlier attempts to install worked graphically for a short while then
degraded rapidly. I tried running an X autoconfiguration called
Xautoconfig-0.22-1a.ppc.rpm which makes little visible difference to the
behaviour.
The machine boots OK and appears to work non-graphically.
Would appreciate any suggestions.
Richard
19 years, 1 month
Modem - G4 Powermac - issues
by Justin Kelly
Hi All
Does Fedora PPC have support for PowerPC modems at the moment?
When i attempt to use the Internet Wizard or wvdial I get errors '-->
Cannot open /dev/ttyS0: Input/output error' (see wvdial log below)
also Kudzu doesnt pick up any modems (See kudzu log below)
In the old days :) when i was using gentoo ppc to get modems working
you had to compile 'macserial' into the kernel and modpobe macserial
to get it working if you had any issues, has macserial been
depreciated as I cant find it when i attempt to recompile the fedora
or cent kernel?
ive tried
http://www.yellowdoglinux.com/support/solutions/ydl_4.0/dialup.shtml
http://www.tldp.org/HOWTO/Modem-HOWTO.html
and more but have had no luck
http://www.fedoraforum.org/forum/showthread.php?t=52183
Does anyone have any ideas on how to get modems working?
Bit of a spastic question but do PowerMacs use HCF modems, if so is
just using the Linuxant drivers the easiest solution?
Below is some more detailed logs and info about my system
Thanks
Justin
______________
STTY
_______________
[root@localhost justin]# stty -F /dev/ttyS0
stty: /dev/ttyS0: Input/output error
_______________
FUSER
_______________
[root@localhost justin]# /sbin/fuser /dev/ttyS0
_______________
[root@localhost justin]# /sbin/fuser -k /dev/ttyS0
_______________
WVDIAL
_______________
[root@localhost justin]# wvdial Pacific
--> WvDial: Internet dialer version 1.54.0
--> Cannot open /dev/ttyS0: Input/output error
--> Cannot open /dev/ttyS0: Input/output error
--> Cannot open /dev/ttyS0: Input/output error
_______________
KUDZU
_______________
[root@localhost justin]# /usr/sbin/kudzu -p
-
class: OTHER
bus: PCI
detached: 0
driver: unknown
desc: "Apple Computer Inc. UniNorth Internal PCI"
vendorId: 106b
deviceId: 001e
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 2
pcibus: 21
pcidev: b
pcifn: 0
-
class: OTHER
bus: PCI
detached: 0
driver: unknown
desc: "Apple Computer Inc. KeyLargo Mac I/O"
vendorId: 106b
deviceId: 0022
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 1
pcibus: 11
pcidev: 7
pcifn: 0
-
class: OTHER
bus: PCI
detached: 0
driver: unknown
desc: "Digital Equipment Corporation DECchip 21154"
vendorId: 1011
deviceId: 0026
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 1
pcibus: 10
pcidev: d
pcifn: 0
-
class: OTHER
bus: PCI
detached: 0
driver: unknown
desc: "Apple Computer Inc. UniNorth PCI"
vendorId: 106b
deviceId: 001f
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 1
pcibus: 10
pcidev: b
pcifn: 0
-
class: OTHER
bus: PCI
detached: 0
driver: unknown
desc: "Apple Computer Inc. UniNorth AGP"
vendorId: 106b
deviceId: 0020
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 0
pcibus: 0
pcidev: b
pcifn: 0
-
class: OTHER
bus: USB
detached: 0
driver: unknown
desc: "Linux 2.6.11-1.1226_FC4 ohci_hcd OHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 1
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.11-1.1226_FC4 ohci_hcd
usbprod: OHCI Host Controller
-
class: OTHER
bus: USB
detached: 0
driver: unknown
desc: "Linux 2.6.11-1.1226_FC4 ohci_hcd OHCI Host Controller"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 2
usblevel: 0
usbport: 0
usbdev: 1
vendorId: 0000
deviceId: 0000
usbmfr: Linux 2.6.11-1.1226_FC4 ohci_hcd
usbprod: OHCI Host Controller
-
class: OTHER
bus: USB
detached: 0
driver: unknown
desc: "Mitsumi Electric Apple Extended USB Keyboard"
usbclass: 3
usbsubclass: 0
usbprotocol: 0
usbbus: 2
usblevel: 2
usbport: 2
usbdev: 4
vendorId: 05ac
deviceId: 020b
usbmfr: Mitsumi Electric
usbprod: Apple Extended USB Keyboard
-
class: OTHER
bus: USB
detached: 0
driver: unknown
desc: "Mitsumi Electric Hub in Apple Extended USB Keyboard"
usbclass: 9
usbsubclass: 0
usbprotocol: 0
usbbus: 2
usblevel: 1
usbport: 0
usbdev: 2
vendorId: 05ac
deviceId: 1003
usbmfr: Mitsumi Electric
usbprod: Hub in Apple Extended USB Keyboard
-
class: OTHER
bus: PSAUX
detached: 0
driver: ignore
desc: "PowerMac Beep"
-
class: NETWORK
bus: PCI
detached: 0
device: eth0
driver: sungem
desc: "Apple Computer Inc. UniNorth GMAC (Sun GEM)"
network.hwaddr: 00:30:65:8F:4C:16
vendorId: 106b
deviceId: 0021
subVendorId: ffff
subDeviceId: ffff
pciType: 1
pcidom: 2
pcibus: 21
pcidev: f
pcifn: 0
-
class: SCSI
bus: PCI
detached: 0
driver: aic7xxx
desc: "Adaptec AHA-7850"
vendorId: 9004
deviceId: 5078
subVendorId: 9004
subDeviceId: 7850
pciType: 1
pcidom: 1
pcibus: 11
pcidev: 4
pcifn: 0
-
class: MOUSE
bus: USB
detached: 0
device: input/mice
driver: genericwheelusb
desc: "Cypress Semiconductor Corp. Mouse"
usbclass: 3
usbsubclass: 1
usbprotocol: 2
usbbus: 2
usblevel: 2
usbport: 0
usbdev: 3
vendorId: 04b4
deviceId: 0001
usbmfr: 4D Mouse
usbprod: USB Mouse
-
class: MOUSE
bus: PSAUX
detached: 0
device: input/mice
driver: generic3ps/2
desc: "Macintosh mouse button emulation"
-
class: AUDIO
bus: MACIO
detached: 0
driver: snd_powermac
desc: "Apple Computer Inc.|PowerMac Sound"
-
class: CDROM
bus: IDE
detached: 0
device: hdc
driver: ignore
desc: "PIONEER DVD-RW DVR-106D"
-
class: VIDEO
bus: PCI
detached: 0
driver: Card:ATI Rage 128
desc: "ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS"
vendorId: 1002
deviceId: 5046
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 10
pcifn: 0
-
class: VIDEO
bus: DDC
detached: 0
driver: unknown
desc: "ATY Rage128"
mem: 1048576
-
class: HD
bus: IDE
detached: 0
device: hda
driver: ignore
desc: "WDC WD2000JB-00GVA0"
physical: 16383/16/63
logical: 24321/255/63
-
class: HD
bus: IDE
detached: 0
device: hdb
driver: ignore
desc: "ST340810A"
physical: 16383/16/63
logical: 65535/16/63
-
class: KEYBOARD
bus: USB
detached: 0
driver: keybdev
desc: "Mitsumi Electric Apple Extended USB Keyboard"
usbclass: 3
usbsubclass: 1
usbprotocol: 1
usbbus: 2
usblevel: 2
usbport: 2
usbdev: 4
vendorId: 05ac
deviceId: 020b
usbmfr: Mitsumi Electric
usbprod: Apple Extended USB Keyboard
-
class: USB
bus: PCI
detached: 0
driver: ohci-hcd
desc: "Apple Computer Inc. KeyLargo USB"
vendorId: 106b
deviceId: 0019
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 1
pcibus: 11
pcidev: 9
pcifn: 0
-
class: USB
bus: PCI
detached: 0
driver: ohci-hcd
desc: "Apple Computer Inc. KeyLargo USB"
vendorId: 106b
deviceId: 0019
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 1
pcibus: 11
pcidev: 8
pcifn: 0
-
class: FIREWIRE
bus: PCI
detached: 0
driver: ohci1394
desc: "Texas Instruments TSB12LV23 IEEE-1394 Controller"
vendorId: 104c
deviceId: 8019
subVendorId: 0000
subDeviceId: 0000
pciType: 1
pcidom: 1
pcibus: 11
pcidev: a
pcifn: 0
____________________
LSPCI
____________________
[root@localhost justin]# /sbin/lspci -v
00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP
Flags: bus master, 66Mhz, medium devsel, latency 16
Capabilities: [80] AGP version 1.0
00:10.0 VGA compatible controller: ATI Technologies Inc Rage 128
PF/PRO AGP 4x T MDS (prog-if 00 [VGA])
Flags: bus master, stepping, 66Mhz, medium devsel, latency 255, IRQ 48
Memory at 0000000094000000 (32-bit, prefetchable) [size=64M]
I/O ports at 802400 [size=256]
Memory at 0000000090000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at 00000000f1000000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Capabilities: [5c] Power Management version 2
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI
Flags: bus master, 66Mhz, medium devsel, latency 16
0001:10:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21154
(rev 05) (p rog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 32
Bus: primary=10, secondary=11, subordinate=11, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-800fffff
Capabilities: [dc] Power Management version 1
0001:11:04.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
Subsystem: Adaptec AHA-2904/Integrated AIC-7850
Flags: bus master, medium devsel, latency 16, IRQ 54
I/O ports at 1000 [disabled] [size=256]
Memory at 0000000080083000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 1
0001:11:07.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 02)
Flags: bus master, medium devsel, latency 16
Memory at 0000000080000000 (32-bit, non-prefetchable) [size=512K]
0001:11:08.0 USB Controller: Apple Computer Inc. KeyLargo USB (prog-if
10 [OHCI] )
Flags: bus master, medium devsel, latency 16, IRQ 27
Memory at 0000000080082000 (32-bit, non-prefetchable) [size=4K]
0001:11:09.0 USB Controller: Apple Computer Inc. KeyLargo USB (prog-if
10 [OHCI] )
Flags: bus master, medium devsel, latency 16, IRQ 28
Memory at 0000000080081000 (32-bit, non-prefetchable) [size=4K]
0001:11:0a.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23
IEEE-1394 Control ler (prog-if 10 [OHCI])
Flags: bus master, medium devsel, latency 16, IRQ 63
Memory at 0000000080080000 (32-bit, non-prefetchable) [size=2K]
Memory at 0000000080084000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
0002:21:0b.0 Host bridge: Apple Computer Inc. UniNorth Internal PCI
Flags: bus master, 66Mhz, medium devsel, latency 16
0002:21:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC
(Sun GEM) (r ev ff) (prog-if ff)
!!! Unknown header type 7f
______________________
DMESG
______________________
[root@localhost justin]# dmesg
Total memory = 1536MB; using 4096kB for hash table (at c0800000)
Linux version 2.6.11-1.1226_FC4 (bhcompile(a)cure81.build.redhat.com)
(gcc version 4.0.0 20050402 (Red Hat 4.0.0-0.39)) #1 Mon Apr 4
21:58:05 EDT 2005
Found UniNorth memory controller & host bridge, revision: 7
Mapped at 0xfdeb0000
Found a Keylargo mac-io controller, rev: 2, mapped at 0xfde30000
Processor NAP mode on idle enabled.
PowerMac motherboard: PowerMac G4 AGP Graphics
Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->1
Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0
via-pmu: Server Mode is disabled
PMU driver 2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=718, gen1=719
nvram: Active bank is: 1
nvram: OF partition at 0x210
nvram: XP partition at 0x1220
nvram: NR partition at 0x1320
On node 0 totalpages: 393216
DMA zone: 196608 pages, LIFO batch:16
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 196608 pages, LIFO batch:16
Built 1 zonelists
Kernel command line: ro rhgb quiet root=LABEL=/
PowerMac using OpenPIC irq controller at 0x80040000
OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc5df000
OpenPIC timer frequency is 4.166666 MHz
PID hash table entries: 4096 (order: 12, 65536 bytes)
GMT Delta read from XPRAM: 600 minutes, DST: off
time_init: decrementer frequency = 24.907667 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1548800k available (3248k kernel code, 1200k data, 196k init,
786432k highmem)
AGP special page: 0xeffff000
Calibrating delay loop... 794.62 BogoMIPS (lpj=397312)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
checking if image is initramfs... it is
Freeing initrd memory: 1088k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Enabling device 0001:11:04.0 (0014 -> 0017)
Registering openpic with sysfs...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Thermal assist unit using timers, shrink_timer: 2000 jiffies
audit: initializing netlink socket (disabled)
audit(1114119158.904:0): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key AC058D89DC52FAA8
- User ID: Red Hat, Inc. (Kernel Module GPG key)
PCI: Enabling device 0000:00:10.0 (0086 -> 0087)
aty128fb: Invalid ROM signature 1111 should be 0xaa55
aty128fb: BIOS not located, guessing timings.
aty128fb: Rage128 PF PRO AGP [chip rev 0x1] 16M 128-bit SDR SGRAM (1:1)
Console: switching to colour frame buffer device 128x48
fb0: ATY Rage128 frame buffer device on Rage128 PF PRO AGP
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected Apple UniNorth chipset
agpgart: configuring for size idx: 4
agpgart: AGP aperture is 16M @ 0x0
[drm] Initialized drm 1.0.0 20040925
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
IN from bad port 3f9 at c01f1b48
IN from bad port 3f9 at c01f1b48
IN from bad port 3f9 at c01f1b48
IN from bad port 2f9 at c01f1b48
IN from bad port 2f9 at c01f1b48
IN from bad port 2f9 at c01f1b48
IN from bad port 3e9 at c01f1b48
IN from bad port 3e9 at c01f1b48
IN from bad port 3e9 at c01f1b48
IN from bad port 2e9 at c01f1b48
IN from bad port 2e9 at c01f1b48
IN from bad port 2e9 at c01f1b48
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
MacIO PCI driver attached to Keylargo chipset
input: Macintosh mouse button emulation
apm_emu: APM Emulation 0.5 initialized.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
adb: starting probe task...
adb: finished probe task...
ide0: Found Apple KeyLargo ATA-4 controller, bus ID 2, irq 19
Probing IDE interface ide0...
hda: WDC WD2000JB-00GVA0, ATA DISK drive
hdb: ST340810A, ATA DISK drive
hda: Enabling Ultra DMA 4
hdb: Enabling Ultra DMA 4
ide0 at 0xf100e000-0xf100e007,0xf100e160 on irq 19
ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 20
Probing IDE interface ide1...
hdc: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive
hdc: Enabling MultiWord DMA 2
ide1 at 0xf101a000-0xf101a007,0xf101a160 on irq 20
ide2: Found Apple KeyLargo ATA-3 controller, bus ID 1, irq 21
Probing IDE interface ide2...
ide2: Bus empty, interface released.
hda: max request size: 1024KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(66)
hda: cache flushes supported
hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 hda11
hda12 hda13 hda14 hda15 hda16
hdb: max request size: 128KiB
hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66)
hdb: cache flushes not supported
hdb: [mac] hdb1 hdb2
hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 128Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1835008 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 196k init 4k chrp 8k prep
SCSI subsystem initialized
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2902/04/10/15/20C/30C SCSI adapter>
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 5 roles, 593 types, 64 bools
security: 54 classes, 78034 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hda12, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
Floppy drive(s): fd0 is 2.88M
IN from bad port 3f4 at f2242a74
floppy0: no floppy controllers found
sungem.c:v0.98 8/24/03 David S. Miller (davem(a)redhat.com)
PHY ID: 406212, addr: 0
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:30:65:8f:4c:16
eth0: Found BCM5201 PHY
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Enabling device 0001:11:08.0 (0000 -> 0002)
ohci_hcd 0001:11:08.0: OHCI Host Controller
ohci_hcd 0001:11:08.0: new USB bus registered, assigned bus number 1
ohci_hcd 0001:11:08.0: irq 27, io mem 0x80082000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Enabling device 0001:11:09.0 (0000 -> 0002)
ohci_hcd 0001:11:09.0: OHCI Host Controller
ohci_hcd 0001:11:09.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:11:09.0: irq 28, io mem 0x80081000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using ohci_hcd and address 2
ieee1394: Initialized config rom entry `ip1394'
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
ohci1394: $Rev: 1250 $ Ben Collins <bcollins(a)debian.org>
PCI: Enabling device 0001:11:0a.0 (0010 -> 0012)
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[63]
MMIO=[80080000-800807ff] Max Packet=[2048]
usb 2-1.1: new low speed USB device using ohci_hcd and address 3
input: USB HID v1.00 Mouse [4D Mouse USB Mouse] on usb-0001:11:09.0-1.1
usb 2-1.3: new full speed USB device using ohci_hcd and address 4
input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB
Keyboard] on usb-0001:11:09.0-1.3
input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB
Keyboard] on usb-0001:11:09.0-1.3
ieee1394: Host added: ID:BUS[0-00:1023] GUID[003065fffe8f4c16]
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
Disabled Privacy Extensions on device c039f7a4(lo)
IPv6 over IPv4 tunneling driver
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel(a)redhat.com
EXT3 FS on hda12, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda13, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda13, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda15, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda15, type ext3), uses xattr
Adding 1023992k swap on /dev/hda14. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ip_tables: (C) 2000-2002 Netfilter core team
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
lp: driver loaded but no devices found
application mixer_applet2 uses obsolete OSS audio interface
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
usb 2-1.2: new full speed USB device using ohci_hcd and address 5
Initializing USB Mass Storage driver...
scsi1 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Vendor: LEXAR Model: DIGITAL FILM Rev: /W1.
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 251904 512-byte hdwr sectors (129 MB)
sda: Write Protect is off
sda: Mode Sense: 0d 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 251904 512-byte hdwr sectors (129 MB)
sda: Write Protect is off
sda: Mode Sense: 0d 00 00 00
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0
usb-storage: device scan complete
SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
_________________
SETSERIAL
_________________
[root@localhost justin]# setserial -a /dev/ttyS0
/dev/ttyS0, Line 0, UART: unknown, Port: 0x03f8, IRQ: 4
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test auto_irq
19 years, 1 month
