test May 2005

test@lists.fedoraproject.org

305 participants
459 discussions

boot freezes at sata_sil
by BC 05 May '05

05 May '05

Anyone know what is happening ? My boot of FC4 T2 freezes at loading sata_sil driver and I see Disabling IRQ #11. I tried linux acpi=off noapic pci=noapic BC

2 1

RE: Re: kernel-0:2.6.11-1.1284_FC4.i686
by Fred New 04 May '05

04 May '05

On Wed 5/4/2005 11:31 PM, luya wrote: > > > > > > I cannot boot my system with the newest kernel. It gets to the first > > > stages of init and then hangs trying to start udev: > > > > > > Starting udev: MAKEDEV: mkdir: File exists > [ OK ] > > > Initializing hardware . . . > > > > > > and then nothing, only cold reboot to previous kernels works. > > > > > > AMD 2600+, SELinux in targeted mode. > > > > > > Regards, > > > > > > > > Same problem with the new kernel as well. > This is happening on my Pentium III 800 system as well, so it seems to be pretty universal. I can turn the NumLock on and off, but Ctrl-Alt-Delete doesn't do anything. It was also reported in fedora-selinux-list: https://www.redhat.com/archives/fedora-selinux-list/2005-May/msg00014.html Fred

1 0

Re: Re: kernel-0:2.6.11-1.1284_FC4.i686
by Luya Tshimbalanga 04 May '05

04 May '05

> > > > I cannot boot my system with the newest kernel. It gets to the first > > stages of init and then hangs trying to start udev: > > > > Starting udev: MAKEDEV: mkdir: File exists > > Initializing hardware . . . > > > > and then nothing, only cold reboot to previous kernels works. > > > > AMD 2600+, SELinux in targeted mode. > > > > Regards, > > > > Same problem with the new kernel as well. -- _______________________________________________ Get your free email from http://mymail.jp.popstarmail.org Powered by Outblaze

1 0

i875P RAID0
by Dano 04 May '05

04 May '05

Nice day ... could somebody write, how to install fedore core ... (or any boot parameters for kernel, test release 3.91, Fedora Core 4 test 2), because the error is, that drive sdb (not sure) is unreadble. Motherboard Intel Bonanza 875 PBZ, RAID 0 + 2x S-ATA 150 80GB. Daniel

2 1

custom kernel 2.6.11.8
by tony 04 May '05

04 May '05

Hi I am having an odd problem when trying to build a 2.6.11.x kernel for my EPIA M10000 N. It has EPIA specific stuff set and DVB-S modules. I really need to get DRM/DRI working ASAP. When it gets to I2C it gives this error: CC drivers/i2c/i2c-core.o In file included from drivers/i2c/i2c-core.c:29: include/linux/i2c.h:58: erreur: les éléments du tableau sont de type incomplet include/linux/i2c.h:197: erreur: les éléments du tableau sont de type incomplet drivers/i2c/i2c-core.c: In function ‘i2c_transfer’: drivers/i2c/i2c-core.c:594: erreur: le type du paramètre formel 2 est incomplet drivers/i2c/i2c-core.c: In function ‘i2c_master_send’: drivers/i2c/i2c-core.c:620: erreur: le type du paramètre formel 2 est incomplet drivers/i2c/i2c-core.c: In function ‘i2c_master_recv’: drivers/i2c/i2c-core.c:649: erreur: le type du paramètre formel 2 est incomplet make[2]: *** [drivers/i2c/i2c-core.o] Erreur 1 make[1]: *** [drivers/i2c] Erreur 2 make: *** [drivers] Erreur 2 TIA Tony

1 0

Booting problem from last week
by Paul F. Johnson 04 May '05

04 May '05

Hi, I did an update to the machine at work which included the broken version of init-tools (IIRC) which means that booting may not work (which it doesn't at work). Is there any way to rescue said system? I know on the laptop I did it by using RIP Linux, chroot /mnt/linux and chkconfig the clamav stuff which seemed to be annoying the system. Problem is with the box at work is the crash occurs at the end of discovering and allocating PID values to network connectors and I've no idea what service controls that or how to switch it off so I can at least boot and manually fix the problems. Any advice would be appreciated. TTFN Paul -- "In an urban society, everything connects. Each person's needs are fed by the skills of many others. Our lives are woven together in a fabric. But the connections that make society strong also make it vulnerable." - Threads, BBC-TV 1984

2 1

preferred setup for software raid installation
by Neal Becker 04 May '05

04 May '05

I am about to try a new FC4T2 installation. I want to setup using a pair of ATA disks, using raid0. What would be the preferred way to get FC4T2 to install this way? 1) Partition before trying to install 2) Partition using anaconda Also, which is more likely to be recognized by anaconda? 1) lvm on md 2) lvm without md

2 1

Is there any interest in GRID computing?
by Dwaine Castle 04 May '05

04 May '05

Would Fedora developers be interested in experimenting with GRID computing? Testers could contribute some of their system's resources to the development effort. Exploiting resources like under utilized desktop systems would be attractive to large corporations.

3 2

FC4T2 VPN failure
by David Berkley 04 May '05

04 May '05

My pptp (patched) VPN (to a microsoft server) works fine on FC3 and fails authentication (bad reply to magic number) in FC4. All authentication data appears correct (username, password) but magic number doesn't check with server. I see no bugzilla filing about this but have no idea what type of problem this could be filed as. david __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

3 2

Problem with cgi scripts after update
by Mike old 04 May '05

04 May '05

I have just updated from FC3 to test2 Now none of my perl/cgi/postgres scripts work I get messages to the effect of [Wed May 04 08:56:02 2005] [error] [client 127.0.0.1] DBD::Pg::st execute failed: ERROR: syntax error at or near "$1" at character 1, referer: http://localhost/cgi-bin/con_by_role_sel1.pl [Wed May 04 08:56:02 2005] [error] [client 127.0.0.1] DBD::Pg::st fetchrow_array failed: no statement executing, referer: http://localhost/cgi-bin/con_by_role_sel1.pl [Wed May 04 08:56:02 2005] [error] [client 127.0.0.1] Use of uninitialized value in print at /home/www/cgi-bin/con_by_role_sel2.pl line 19., referer: http://localhost/cgi-bin/con_by_role_sel1.pl [Wed May 04 08:56:02 2005] [error] [client 127.0.0.1] DBD::Pg::st execute failed: ERROR: syntax error at or near "$1" at character 1, referer: http://localhost/cgi-bin/con_by_role_sel1.pl [Wed May 04 08:56:02 2005] [error] [client 127.0.0.1] DBD::Pg::st fetchrow_array failed: no statement executing, referer: http://localhost/cgi-bin/con_by_role_sel1.pl (I was running pg v8 previously) any ideas

1 0

← Newer
1
...
39
40
41
42
43
44
45
46
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test May 2005