set the time??
by Beartooth
How do I tell xfce to use the local timeservers?
--
Beartooth Staffwright, Neo-Redneck Not Quite Clueless Power User
I have precious (very precious!) little idea where up is.
10 years, 8 months
Power manager issues (double wake up, etc.)
by Miro Hrončok
Hi,
because of previous incompatibility with xfce4-power-manager-settings
and /etc/systemd/logind.conf, I've disabled every action in logind.conf
by setting things to ignore.
Yesterday, I've finally managed to comment that out and set things
properly in xfce4-power-manager-settings as desired.
Here is what I want and what I have set in the
xfce4-power-manager-settings (except using slock, because there is no
option for used screen lock):
- When I am not connected to AC and I close the lid, lock the screen
(with slock), but do not suspend/hibernate/whatever. When I am
connected, do not lock.
- When pressed any of the buttons poweroff/suspend/hibernate, ask for
action.
- When suspending/hibernate, lock the screen with slock.
Here is, what really happens:
- Closing lid and using slock to lock the screen (only without AC) works
as expected.
- When I press poweroff or suspend button, I am only asked sometimes,
sometimes nothing happens. (When I change the action from Ask to
Suspend, it works the same, only goes to suspend sometimes, sometimes
nothing happens)
- When going to suspend and wake up, screen is unlocked.
- When I open the lid when suspended, PC wakes up (as expected), but
goes to suspend immediately again, but when I wake up for the second
time, it's not going again to suspend, it's not an infinite loop.
Basicaly, I have to wake up twice (open the lid, wake up, suspend, press
power on, wake up).
I'm using Fedora 18 64bit on Lenovo Thinpad X230. I have no idea, what's
wrong, or whom to report this.
Thanks for any help.
--
Miro Hrončok
--
Phone: +420777974800
Jabber: miro(a)hroncok.cz
10 years, 11 months
OT ? Xfce F19 Final kickstart
by Frank Murphy
Apologies for positing this list.
But, it kinds Xfce..ish at a long stretch.
The rpms that go in to the final Xfce release kickstart.
Will that kickstart.ks be kept online?
--
Regards,
Frank "When in doubt PANIC!"
I check for new mail app. 20min
www.frankly3d.com
10 years, 11 months
Claws-Mail 3.9.1
by Frank Murphy
After upgrading Claws yesterday.
Can no longer minimize to tray,
clicking on x want to close.
--
Regards,
Frank "When in doubt PANIC!"
I check for new mail app. 20min
www.frankly3d.com
10 years, 11 months
Re: Claws-Mail 3.9.1
by Frank Murphy
On Sat, 22 Jun 2013 08:50:31 +0100
Frank Murphy <frankly3d(a)gmail.com> wrote:
> After upgrading Claws yesterday.
> Can no longer minimize to tray,
> clicking on x want to close.
>
Had to install yum claws-mail-plugins-notification
I don't remember having installed\unistalled it.
yum history info nnn
shows only updates\installed, not erased\uninstalled.
--
Regards,
Frank "When in doubt PANIC!"
I check for new mail app. 20min
www.frankly3d.com
10 years, 11 months
Fedora 19 Final TC5 desktop testing
by Adam Williamson
Hi, folks!
There's been substantial churn in F19 lately, but from some smoke
testing, Final TC5 looks like a basically working build that includes
most of the major change we need for final. At this point, 10 days
before go/no-go, we really need to do all the desktop validation testing
and pin down any showstopper issues that remain.
If folks could grab the TC5 Live images from here:
https://dl.fedoraproject.org/pub/alt/stage/19-TC5/Live/ (KDE, GNOME)
https://dl.fedoraproject.org/pub/alt/stage/19-TC5/Spins/ (others)
and help us to fill out the tests at
https://fedoraproject.org/wiki/Test_Results:Fedora_19_Final_TC5_Desktop , it'd be a really big help. Just run any of the tests you can for your desktop, file bugs on any failures you hit, and mark your results in the tables according to the key. It'd be especially good to have help with the deceptively large test case https://fedoraproject.org/wiki/QA:Testcase_desktop_menus , which is basically 'run every app installed by default and make sure it works'. If you do hit problems with any of the tests, first check at https://qa.fedoraproject.org/blockerbugs/milestone/19/final/buglist to see if they've been reported as blocker or freeze exception bugs already.
If you hit a serious new failure of a test on KDE or GNOME, mark the bug
as blocking the bug 'FinalBlocker' (ideally with reference to a
criterion at
https://fedoraproject.org/wiki/Fedora_19_Final_Release_Criteria , but if
you're not good at criteria ju-jitsu that's OK), or use the blocker
proposal web app - https://qa.fedoraproject.org/blockerbugs/propose_bug
- to propose it as a blocker. If you hit serious failure of a test on
any of the other desktops, mark the bug as blocking the bug
'FinalFreezeException', or use the webapp to propose it as a freeze
exception issue.
I have tested that at least each image can boot to a desktop and run the
installer; none of them is entirely DOA. Note, testing in
virtualization, you *may* run into
https://bugzilla.redhat.com/show_bug.cgi?id=974198 ; if so, passing
'nomodeset' should work around it for now.
If you get lost or confused by the process at any point, but you think
you've found an important issue, don't hesitate to holler at me or
anyone else in QA or release engineering, on list, by direct mail or on
IRC. Thanks!
--
Adam Williamson
Fedora QA Community Monkey
IRC: adamw | Twitter: AdamW_Fedora | identi.ca: adamwfedora
http://www.happyassassin.net
10 years, 12 months
What will be the Fedora 19 XFCE version?
by Zoltan Hoppar
Hi,
I would like to know what version will we have in the upcoming Fedora
19 XFCE spin? I interested in this because 4.12 gives multi monitor
support and the drop-down terminal too... However, if we keep the 4.10
- then I would like to request an tiny application addon called arandr
(its in the repo, packaged). With this everyone can set multi monitor
support.
Thanks,
Zoltan
--
PGP: 06853DF7
11 years
Re: pyupdatesd: A Yum Updates Tray Icon for XFCE
by Noah Petherbridge
@Heiko:
I just installed the Fedora 19 Alpha in VirtualBox, downloaded
pyupdatesd and then modified its configuration section to change the
"interval" from 900 seconds down to 10 (to get quicker feedback on
whether the script is working or not). It worked for me. After about 10
seconds from running the script, the tray icon and message appeared, and
clicking it brought me to the yumex GUI.
This script waits /at least/ until the interval is first reached (i.e.
15 minutes after the script is run, in the default configuration),
before it runs `yum check-update` to see if there are updates. When
there are, `yum check-update` exits with status 100, and that's how the
script knows when to show the icon and notification. If this isn't
working, can you try debugging it? Around this part of the code, you can
have it print the status and output of check-update:
if int(time()) >= next_check:
status, output = commands.getstatusoutput(c['check'])
status = status >> 8
+ print "status:", status
+ print "output:", output
# Updates?
if status == 100:
Also the results of running, in bash: `yum check-update; echo $?`
@Frank:
Make sure you're running the script from within X11 (so that $DISPLAY is
set). I see that error message if I attempt to run the script from text
mode. ;) In my XFCE desktop, adding the script to my session startup
list works for me.
$ cat ~/.config/autostart/Update\ Daemon.desktop
[Desktop Entry]
Encoding=UTF-8
Version=0.9.4
Type=Application
Name=Update Daemon
Comment=
Exec=/home/kirsle/bin/pyupdatesd
OnlyShowIn=XFCE;
StartupNotify=false
Terminal=false
Hidden=false
-Noah
On 05/26/2013 05:00 AM, xfce-request(a)lists.fedoraproject.org wrote:
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 26 May 2013 09:37:52 +0200
> From: Heiko Adams <heiko.adams(a)gmail.com>
> To: Fedora Xfce users and developers <xfce(a)lists.fedoraproject.org>
> Subject: Re: pyupdatesd: A Yum Updates Tray Icon for XFCE
> Message-ID: <51A1BBD0.2020707(a)gmail.com>
> Content-Type: text/plain; charset=UTF-8
> Hi,
> it looks like your script doesn't work on Fedora 19. I've tested it this
> morning and absolutely nothing happened. No errormessages but also no
> notifications about new updates - but updates were available.
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 26 May 2013 09:41:10 +0100
> From: Frank Murphy <frankly3d(a)gmail.com>
> To: xfce(a)lists.fedoraproject.org
> Subject: Re: pyupdatesd: A Yum Updates Tray Icon for XFCE
> Message-ID: <51a1caa8.c248b40a.5742.ffffb486(a)mx.google.com>
> Content-Type: text/plain; charset=US-ASCII
>
> On Fri, 24 May 2013 14:15:50 -0700
> Noah Petherbridge <root(a)kirsle.net> wrote:
>
> Fedora 18.x86_64
>
> traceback (most recent call last):
> File "/etc/sysconfig/pyupdatesd", line 55, in <module>
> import gtk
> File "/usr/lib64/python2.7/site-packages/gtk-2.0/gtk/__init__.py",
> line 64, in <module> _init()
> File "/usr/lib64/python2.7/site-packages/gtk-2.0/gtk/__init__.py",
> line 52, in _init _gtk.init_check()
> RuntimeError: could not open display
>
> -- Regards, Frank - I check for new mail app. 20min www.frankly3d.com
11 years
4.10 for SL?
by Todd And Margo Chester
Hi All,
Will we ever see Xfce 4.10 support for Scientific Linux 6.4?
Many thanks,
-T
11 years
